TAPER

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%201750/Drills_-_Drill_-_V-Series_HELIOS_-_List_1750_-_Catalog"],"Number of Flutes":"2","Drilling L/D Ratio (xD)":"10","Shank Diameter - Inch (d)":["0.53125","0.5625","0.703125","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.65625","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.5"],"Overall Length - Metric (L)":["225","236","283","75","90","100","115","128","140","155","165","190","205","215","220"],"Flute Length - Metric (FL)":["175","186","233","26","33","40","45","50","60","65","70","78","87","90","100","105","110","115","125","130","140","145","155","160","55"],"Diameter - Inch (D)":["0.53125","0.5625","0.703125","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.328125","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.5","0.06299","0.07087","0.07874","0.08268","0.08661","0.09055","0.09449","0.09843","0.10236","0.1063","0.11024","0.11417","0.11811","0.12205","0.12598","0.12992","0.13386","0.1378","0.14173","0.14567","0.14961","0.15354","0.15748","0.16142","0.16535","0.16929","0.17323","0.17717","0.1811","0.18504","0.18898","0.19291","0.19685","0.20079","0.20472","0.20866","0.2126","0.21654","0.22047","0.22441","0.22835","0.23228","0.23622","0.24016","0.24409","0.24803","0.25197","0.25591","0.25984","0.26378","0.26772","0.27165","0.27559","0.27953","0.28346","0.2874","0.29134","0.29528","0.29921","0.30315","0.30709","0.31102","0.31496","0.3189","0.32284","0.32677","0.33071","0.33465","0.33858","0.34252","0.34646","0.35039","0.35433","0.35827","0.3622","0.36614","0.37008","0.37402","0.37795","0.38189","0.38583","0.38976","0.3937","0.39764","0.40157","0.40551","0.40945","0.41339","0.41732","0.42126","0.4252","0.42913","0.43307","0.43701","0.44094","0.44488","0.44882","0.45276","0.45669","0.46063","0.46457","0.4685","0.47244"],"Diameter - Metric (D)":["13.494","14.288","17.859","1.984","2.381","2.778","3.175","3.572","3.969","4.366","4.763","5.159","5.556","5.953","6.35","6.747","7.144","7.541","7.938","8.334","8.731","9.128","9.525","9.922","10.319","10.716","11.113","11.509","11.906","12.7","1.6","1.8","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.3","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.3","11.4","11.5","11.6","11.7","11.8","11.9","12"],"Helix Angle - Degree":"40","Web Literature 1":["8002024CA-DR,198|8002024CA-DRT,44","8002024CA-DR,283|8002024CA-DRT,44"],"Cutting Diameter Tolerance Specification":"h8","Benefit 4":"Ensure chips curl tighly and move freely through the flutes to ensure stable evacuation.","Web Literature 4":"800387CA","Short Description":"High Performance Deep Hole Drilling without Coolant Thru","Benefit 2":"Higher coating oxidation temperature & hardness dramatically improve wear resistance","Substrate":"HSS-CO","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Web Video 1":"https://www.youtube.com/watch?v=IXywo2W5Qoc","Aluminum : 6061; 7075":"N; Good","Benefit 3":"Looks like parabolic, but isn't! This flute form ensures extra space while increasing chip evacuation velocity.","Aluminum : Casting":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Units":["Inch","Metric"],"Stainless Steels : 17-4PH":"M; Good","Coolant Thru":"No","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Feature 4":"Pat. Compound Flute Contruction","Feature 2":"OSG WXL Nano Coating","Feature 3":"Pat. Flat Flute Form","Feature 1":"Pat. Low-resistance web thinning","Alloy Steels : 4140; 4340":"P; Best","Benefit 1":"Reduces penetration force by as much as 35%","Cutting Direction":"RH","Die Steels":"P; Best","High Carbon Steel : 1065":"P; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Helix Direction":"RH","Length of Cut - Specification":"TAPER","Cutting Diameter Tolerance - Inch":["+0 / -0.0011","+0 / -0.0006","+0 / -0.0007","+0 / -0.0009"],"List Name":"TDXL-10D","Surface Treatment":"WXL","Titanium : 6AL4V (30HRC)":"S; Good","Point Thinning":["X Thinning","R Thinning"],"Cutting Diameter Tolerance - Metric":["+0 / -0.027","+0 / -0.014","+0 / -0.018","+0 / -0.022"],"Full Description":"The V-Series HELIOS is the 1st drill to process deep holes 10X-20X diameter, without pecking and without the use of internal coolant supply. Flute form, point thining and compound lead construction are all patented technologies developed by OSG to make this drill do what no other parabolic HSS-Co drill can. The addition of our exclusive WXL coating technology makes non-peck drilling repeatable, even in the longest of production runs.","Product Overview":"10X Diameter Lengths, HSS-CO, WXL Coating","Point Angle - Degree (α)":"120","Diameter - Fractional Size (D)":["17/32","9/16","45/64","5/64","3/32","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","1/2"],"Diameter - Letter Size (D)":"E","Shank Diameter - Metric (d)":["1.6","1.8","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.3","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.3","11.4","11.5","11.6","11.7","11.8","11.9","12"],"Diameter-Sizes":"0.06299\" - 17.859mm","Flute-Sizes":"26mm - 233mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"75mm - 283mm","Shank-Sizes":"1.6mm - 0.703125\"","Friendly Name":"1750","CategoryBrand":"V-SERIES"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205220/Drills_-_Drill_-_A_Brand_ADO-SUS_-_List_5220_-_8D_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205220/Drills_-_Drill_-_A_Brand_ADO-SUS_-_List_5220_-_8D_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205220/Drills_-_drill_-_A_Brand_ADO-SUS_-_List_5220_-_8D_-_Face_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205220/Drills_-_Drill_-_A_Brand_ADO-SUS_-_List_5220_-_8D_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205220/Drills_-_drill_-_A_Brand_ADO-SUS_-_List_5220_-_8D_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205220/Drills_-_Drill_-_A_Brand_ADO-SUS_-_List_5220_-_8D_-_Extra_1"],"Number of Flutes":"2","Drilling L/D Ratio (xD)":"8","Shank Diameter - Metric (d)":["3","6","8","14","13","4","10","12","5","7","9","11"],"Diameter - Inch (D)":["0.09375","0.109375","0.125","0.15625","0.161","0.171875","0.1875","0.203125","0.213","0.21875","0.234375","0.25","0.257","0.265625","0.28125","0.296875","0.3125","0.328125","0.332","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.47638","0.48031","0.48425","0.48819","0.49213","0.49606","0.5","0.12205","0.12598","0.12992","0.13386","0.1378","0.14173","0.14567","0.14961","0.15354","0.15748","0.16142","0.16535","0.16929","0.17323","0.17717","0.1811","0.18504","0.18898","0.19291","0.19685","0.20079","0.20472","0.20866","0.2126","0.21654","0.22047","0.22441","0.22835","0.23228","0.23622","0.24016","0.24409","0.24803","0.25197","0.25591","0.25984","0.26378","0.26772","0.27165","0.27559","0.27953","0.28346","0.2874","0.29134","0.29528","0.29921","0.30315","0.30709","0.31102","0.31496","0.3189","0.32283","0.32677","0.33071","0.33465","0.33858","0.34252","0.34646","0.35039","0.35433","0.35827","0.3622","0.36614","0.37008","0.37402","0.37795","0.38189","0.38583","0.38976","0.3937","0.39764","0.40157","0.40551","0.40945","0.41339","0.41732","0.42126","0.4252","0.42913","0.43307","0.43701","0.44094","0.44488","0.44882","0.45276","0.45669","0.46063","0.46457","0.4685","0.47244","0.07874","0.08268","0.08661","0.09055","0.09449","0.09843","0.10236","0.1063","0.11024","0.11417","0.11811"],"Overall Length - Metric (L)":["75","80","95","105","115","125","140","150","160","182","194","206"],"Flute Length - Metric (FL)":["27","31","35","44","45","47","52","57","60","61","66","70","72","74","79","84","87","92","93","96","101","105","110","113","118","122","127","133","134","135","136","138","139","140","34","36","37","39","40","41","42","43","46","48","50","51","53","54","55","56","58","59","62","63","64","65","67","68","69","73","75","76","77","78","80","81","83","85","86","88","89","90","91","94","95","97","98","99","100","102","103","106","107","108","109","111","112","114","116","117","119","120","121","123","124","125","128","129","130","131","132","22","24","25","26","28","29","30","32","33"],"Diameter - Metric (D)":["2.381","2.778","3.175","3.97","4.089","4.366","4.763","5.159","5.41","5.556","5.953","6.35","6.528","6.747","7.144","7.541","7.938","8.334","8.433","8.731","9.128","9.525","9.922","10.319","10.716","11.113","11.509","12.1","12.2","12.3","12.4","12.5","12.6","12.7","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.3","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.3","11.4","11.5","11.6","11.7","11.8","11.9","12","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3"],"List Name":"ADO-SUS-8D","Short Description":"Advanced Performance Carbide Drills for Stainless Steels and Titanium Alloys","Helix Angle - Degree":"30","Substrate":"Carbide","Web Literature 1":["8002024CA-DR,122|8002024CA-DRT,8","8002024CA-DR,198|8002024CA-DRT,8","8002024CA-DR,53|8002024CA-DRT,8","8002024CA-DR,108|8002024CA-DRT,8","8002024CA-DR,90|8002024CA-DRT,8","8002024CA-DR,54|8002024CA-DRT,8","8002024CA-DR,55|8002024CA-DRT,8","8002024CA-DR,56|8002024CA-DRT,8","8002024CA-DR,283|8002024CA-DRT,8"],"Shank Tolerance":"h6","Cutting Diameter Tolerance Specification":"h8","Web Literature 2":"800284CA-V3","Benefit 4":"Enables the creation of compact cutting chips","Web Literature 4":"800387CA","Benefit 1":"Higher coating oxidation temperature & hardness dramatically improve wear resistance","Cast Iron":"K; Best","Web Literature 3":"80069CA","Product Overview":"8xD, Coolant Thru, WXL®","Web Video 3":"https://www.youtube.com/watch?v=2qrotaZFtBs","Web Video 1":"https://www.youtube.com/watch?v=3j1knu2aEMg","Hardened Steels : 35 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Web Video 2":"https://www.youtube.com/watch?v=L6HpXqHkbVk","Stainless Steels : 17-4PH":"M; Best","Stainless Steels : 300":"M; Best","Aluminum : Casting":"N; Good","Stainless Steels : 400":"M; Best","Benefit 3":"Improved coolant delivery at the cutting edge supresses heat buildup and improves chip evacuation, thereby increasing tool life and enabling faster drilling speeds.","Medium Carbon Steel : 1035; 1045":"P; Best","Units":["Inch","Metric"],"Feature 4":"New flute geometry","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Feature 1":"OSG's WXL^® nano coating technology","Feature 3":"Mega Cooler™ internal coolant holes","Point Thinning":"R Thinning","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011"],"Feature 2":"Wavy form cutting edge design","Length of Cut - Specification":"TAPER","Titanium : 6AL4V (30HRC)":"S; Best","Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027"],"Surface Treatment":"WXL","Full Description":"The A Brand ADO-SUS drill series is OSG's premium line of carbide coolant-fed high performance drills, designed to drill in a stainless steel. New \"Mega Cooler™\" coolant hole shape improves coolant flow, chip evacuation and cutting heat generation. This reduces work hardening, which leads to longer tool life during tapping and reaming operations. While our proprietary WXL coating provides drastically higher coating oxidation temperature and hardness that dramatically improves wear resistance.  ","Benefit 2":"Sharper cutting action reduces thrust forces and produces smaller chips for easy hole processing","Coolant Thru":"Yes","Point Angle - Degree (α)":"135","Diameter - Fractional Size (D)":["3/32","7/64","1/8","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.34375","0.4375","0.5"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["E","F","Q"],"Diameter-Sizes":"0.07874\" - 12.7mm","Flute-Sizes":"22mm - 140mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"75mm - 206mm","Shank-Sizes":"3mm - 14mm","Friendly Name":"5220","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205310/Drills_-_Drill_-_EXOCARB_MAX-MINI_-_List_5310_-_Catalog"],"Number of Flutes":"3","Drilling L/D Ratio (xD)":"3","Diameter - Inch (D)":["0.03937","0.04331","0.04724","0.05118","0.05512","0.05906","0.06299","0.06693","0.07087","0.0748","0.07874","0.09843","0.11811"],"Shank Diameter - Metric (d)":["3"],"Overall Length - Metric (L)":["57","65"],"Flute Length - Metric (FL)":["5","5.5","6.5","7.5","8.5","9.5","10.5","13","15"],"Neck Length - Metric (L1)":["20","30"],"Diameter - Metric (D)":["1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.5","3"],"Feature 2":"3-Flute High Rigid Flute Form","Substrate":"Carbide","Web Literature 1":["8002024CA-DR,122|8002024CA-DRT,26","8002024CA-DR,283|8002024CA-DRT,26"],"Shank Tolerance":"h6","Cutting Diameter Tolerance Specification":"h8","Short Description":"High Performance Carbide Miniature Drills for Deep hole Drilling 40-65 HRC","Surface Treatment":"EXO","Web Literature 4":"800387CA","List Name":"FHL-GDTS","Benefit 3":"Further optimizes tool body rigidity.","Web Literature 2":"80060CA-V2","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 50-70 HRC":"H; Best","Hardened Steels : 35 HRC":"H; Good","Benefit 2":"A larger core diameter that provides the rigidity needed to drill hardened steels.","Benefit 1":"A multi-layered TiAlN coating provides greater resistance to heat and wear, ideal for applications in hardened steel.","Hardened Steels : 35-45 HRC":"H; Good","Coolant Thru":"No","Feature 1":"OSG's EXO Coating Technology","Units":"Metric","Feature 3":"Reduced Neck Configuration","Product Overview":"Miniature, Up to 20xD","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Length of Cut - Specification":"STUB","Cutting Diameter Tolerance - Inch":"+0 / -0.0006","Cutting Diameter Tolerance - Metric":"+0 / -0.014","Full Description":"The EXOCARB® MAX-MINI drill is a 3-flute miniature drills designed specifically for processing small holes up to 20 X diameter in material up to 65 HRC.","Point Thinning":"X Thinning","Notes":"Shrink fit holders recommended. Must utilize recommended peck cycle for optimum tool life.","Point Angle - Degree (α)":["140","120"],"Helix Angle - Degree":"25","Diameter-Sizes":"0.03937\" - 3mm","Flute-Sizes":"5mm - 15mm","Neck-Sizes":"20mm - 30mm","Taper-Sizes":"-","Overall-Sizes":"57mm - 65mm","Shank-Sizes":"3mm","Friendly Name":"5310","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%205630/Drills_-_Drill_-_EXOPRO_Mega_Muscle_-_List_5630_-_Catalog"],"Number of Flutes":"3","Diameter - Metric (D)":["5","6.5","7","8.5","9","5.1","5.159","5.2","5.3","5.4","5.41","5.558","5.6","5.7","5.8","5.9","5.953","6.1","6.2","6.3","6.35","6.4","6.53","6.6","6.7","6.747","6.8","6.9","7.1","7.144","7.2","7.3","7.4","7.541","7.6","7.7","7.8","7.9","7.938","8.1","8.2","8.3","8.334","8.4","8.433","8.6","8.7","8.733","8.8","8.9","9.1","9.128","9.2","9.3","9.4","9.525","9.6","9.7","9.8","9.9","9.922","10.1","10.2","10.3","10.319","10.4","10.7","10.5","10.6","10.716","10.8","10.9","11","11.1","11.113","11.2","11.3","11.4","11.509","11.6","11.7","11.8","12.1","12.2","12.3","12.4","12.5","12.6","12.7","13.494","13.5","14","14.288","11.9","14.5","15.875","5.5","6","7.5","8","9.5","10","11.5","12"],"Drilling L/D Ratio (xD)":"10","Overall Length - Metric (L)":["115","140","165","128","155","190","205","215","225","230","240","260"],"Diameter - Inch (D)":["0.19685","0.25591","0.27559","0.33465","0.35433","0.20079","0.203125","0.20472","0.20866","0.2126","0.21299","0.21875","0.22047","0.22441","0.22835","0.23228","0.234375","0.24016","0.24409","0.24803","0.25","0.25197","0.25709","0.25984","0.26378","0.265625","0.26772","0.27165","0.27953","0.28125","0.28346","0.2874","0.29134","0.296875","0.29921","0.30315","0.30709","0.31102","0.3125","0.3189","0.32283","0.32677","0.328125","0.33071","0.332","0.33858","0.34252","0.34375","0.34646","0.35039","0.35827","0.359375","0.3622","0.36614","0.37008","0.375","0.37795","0.38189","0.38583","0.38976","0.390625","0.39764","0.40157","0.40551","0.40625","0.40945","0.42126","0.41339","0.41732","0.421875","0.4252","0.42913","0.43307","0.43701","0.4375","0.44094","0.44488","0.44882","0.453125","0.45669","0.46063","0.46457","0.47638","0.48031","0.48425","0.48819","0.49213","0.49606","0.5","0.53125","0.5315","0.55118","0.5625","0.4685","0.57087","0.625","0.21654","0.23622","0.29528","0.31496","0.37402","0.3937","0.45276","0.47244"],"Shank Diameter - Metric (d)":["6","8","10","12","14","16"],"Flute Length - Metric (FL)":["65","87","90","110","115","70","78","100","105","125","130","140","145","155","175","180","190","210"],"Helix Angle - Degree":"30","Benefit 2":"Breaks steel chips into small manageable pieces for easy ejection.","Substrate":"Carbide","Web Literature 1":["8002024CA-DR,162|8002024CA-DRT,18","8002024CA-DR,198|8002024CA-DRT,18","8002024CA-DR,283|8002024CA-DRT,18"],"Shank Tolerance":"h6","Cutting Diameter Tolerance Specification":"h8","Web Literature 4":"800387CA","Benefit 1":"Higher coating oxidation temp & hardness dramatically improve wear resistance","Cast Iron":"K; Best","Hardened Steels : 35 HRC":"H; Good","Web Video 1":"https://www.youtube.com/watch?v=e0yM5fHjxqc","Low Carbon Steel : 1010; 1018":"P; Best","Web Video 2":"https://www.youtube.com/watch?v=VrfzSp0uDLI","Web Video 3":"https://www.youtube.com/watch?v=wL1jiJinLDs","Aluminum : Casting":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Benefit 3":"Optimum coolant delivered to cutting edges for longer life and smooth chip evacuation.","Feature 2":"Patented Flute Geometry","Feature 1":"OSG's WD1 Nano Coating Technology","Point Thinning":"R Thinning","Units":["Metric","Inch"],"Alloy Steels : 4140; 4340":"P; Best","Cutting Direction":"RH","Die Steels":"P; Best","High Carbon Steel : 1065":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Feature 3":"Triple coolant ports","List Name":"TRS-HO-10D","Length of Cut - Specification":"TAPER","Surface Treatment":"WD1","Full Description":"The EXOPRO Mega Muscle drill is the world's first 3-flute drill for steels. Patented geometry permits stable chip ejection, even with less chip pocket space inherent in 3-flute drills. The result is up to 3X faster than 2-flute drills and up to 3X longer life.  ","Short Description":"The Fastest & Most Productive Coolant-Fed Carbide Drill for Steel Applications","Coolant Thru":"Yes","Cutting Diameter Tolerance - Inch":["-0.0007 / -0.0014","-0.0009 / -0.0018","-0.0012 / -0.0023"],"Cutting Diameter Tolerance - Metric":["-0.020 / -0.038","-0.025 / -0.047","-0.032 / -0.059"],"Product Overview":"10xD, Coolant Thru, 3 Flute, WD1","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","1/2","17/32","9/16","5/8"],"Diameter - Wire Gage (D)":"3","Shank Diameter - Inch (d)":["0.25","0.3125","0.375","0.4375","0.5","0.625"],"Diameter - Letter Size (D)":["E","Q"],"Diameter-Sizes":"0.19685\" - 15.875mm","Flute-Sizes":"65mm - 210mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"115mm - 260mm","Shank-Sizes":"6mm - 16mm","Friendly Name":"5630","CategoryBrand":"EXOPRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206520/Drills_-_Drill_-_A_Brand_ADO_-_List_6520_-_8D_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206520/Drills_-_Drill_-_A_Brand_ADO_-_List_6520_-_8D_-_Angle_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206520/Drills_-_Drill_-_A_Brand_ADO_-_List_6520_-_8D_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206520/Drills_-_Drill_-_A_Brand_ADO_-_Group_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206520/Drills_-_Drill_-_A_Brand_ADO_-_Group_7","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206520/Drills_-_Drill_-_A_Brand_ADO_-_Group_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206520/Drills_-_Drill_-_A_Brand_ADO_-_Group_6"],"Number of Flutes":"2","Drilling L/D Ratio (xD)":"8","Shank Diameter - Metric (d)":["3","6","8","4","5","7","9","10","11","12","13","14","16"],"Diameter - Inch (D)":["0.09375","0.109375","0.125","0.15625","0.161","0.171875","0.1875","0.203125","0.213","0.21875","0.234375","0.25","0.257","0.265625","0.28125","0.296875","0.3125","0.328125","0.332","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.5","0.53125","0.5625","0.625","0.07874","0.08268","0.08661","0.09055","0.09449","0.09843","0.10236","0.1063","0.11024","0.11417","0.11811","0.12205","0.12598","0.12992","0.13386","0.1378","0.14173","0.14567","0.14961","0.15354","0.15748","0.17717","0.19685","0.21654","0.23622","0.25591","0.27559","0.29528","0.31496","0.33465","0.35433","0.37402","0.3937","0.41339","0.43307","0.45276","0.47244","0.49213","0.16142","0.16535","0.16929","0.17323","0.1811","0.18504","0.18898","0.19291","0.20079","0.20472","0.20866","0.2126","0.22047","0.22441","0.22835","0.23228","0.24016","0.24409","0.24803","0.25197","0.25984","0.26378","0.26772","0.27165","0.27953","0.28346","0.2874","0.29134","0.29921","0.30315","0.30709","0.31102","0.3189","0.32283","0.32677","0.33071","0.33858","0.34252","0.34646","0.35039","0.35827","0.3622","0.36614","0.37008","0.37795","0.38189","0.38583","0.38976","0.39764","0.40157","0.40551","0.40945","0.41732","0.42126","0.4252","0.42913","0.43701","0.44094","0.44488","0.44882","0.45669","0.46063","0.46457","0.4685","0.47638","0.48031","0.48425","0.48819","0.49606","0.5315","0.55118","0.57087"],"Overall Length - Metric (L)":["75","80","95","105","115","125","140","150","160","182","194","206","218","230","241"],"Flute Length - Metric (FL)":["27","31","35","44","45","47","52","57","60","61","66","70","72","74","79","84","87","92","93","96","101","105","110","113","118","122","127","140","149","157","175","22","24","25","26","28","29","30","32","33","34","36","37","39","40","41","42","43","50","55","77","83","88","94","99","116","121","132","138","46","48","51","53","54","56","58","59","62","63","64","65","67","68","69","73","75","76","78","80","81","85","86","89","90","91","95","97","98","100","102","103","106","107","108","109","111","112","114","117","119","120","123","124","125","128","129","130","131","133","134","135","136","139","154","160"],"Diameter - Metric (D)":["2.381","2.778","3.175","3.969","4.089","4.366","4.763","5.159","5.41","5.556","5.953","6.35","6.528","6.747","7.144","7.541","7.938","8.334","8.433","8.733","9.128","9.525","9.922","10.319","10.716","11.113","11.509","12.7","13.494","14.288","15.875","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.5","5","5.5","6","6.5","7","7.5","8","8.5","9","9.5","10","10.5","11","11.5","12","12.5","4.1","4.2","4.3","4.4","4.6","4.7","4.8","4.9","5.1","5.2","5.3","5.4","5.6","5.7","5.8","5.9","6.1","6.2","6.3","6.4","6.6","6.7","6.8","6.9","7.1","7.2","7.3","7.4","7.6","7.7","7.8","7.9","8.1","8.2","8.3","8.4","8.6","8.7","8.8","8.9","9.1","9.2","9.3","9.4","9.6","9.7","9.8","9.9","10.1","10.2","10.3","10.4","10.6","10.7","10.8","10.9","11.1","11.2","11.3","11.4","11.6","11.7","11.8","11.9","12.1","12.2","12.3","12.4","12.6","13.5","14","14.5"],"Helix Angle - Degree":"30","Substrate":"Carbide","Benefit 3":"Coolant delivery at the cutting edge reduces heat and improves chip evacuation, thereby increasing tool life and enabling faster drilling speeds.","Shank Tolerance":"h6","Web Literature 1":["8002024CA-DR,254|8002024CA-DRT,2","8002024CA-DR,245|8002024CA-DRT,2","8002024CA-DR,224|8002024CA-DRT,2","8002024CA-DR,220|8002024CA-DRT,2","8002024CA-DR,237|8002024CA-DRT,2","8002024CA-DR,236|8002024CA-DRT,2","8002024CA-DR,221|8002024CA-DRT,2","8002024CA-DR,238|8002024CA-DRT,2","8002024CA-DR,239|8002024CA-DRT,2","8002024CA-DR,258|8002024CA-DRT,2","8002024CA-DR,162|8002024CA-DRT,2","8002024CA-DR,199|8002024CA-DRT,2","8002024CA-DR,283|8002024CA-DRT,2"],"Surface Treatment":"EgiAs","Cutting Diameter Tolerance Specification":"h8","Web Literature 2":"800284CA-V3|800284CA-V3","Short Description":"High Performance Coolant-Fed Carbide Drills for Ferrous and Non-Ferrous Materials","Benefit 1":"Higher coating oxidation temp & hardness dramatically improve wear resistance","Web Literature 4":"800387CA","Web Literature 3":"80065CA|800362CA|800363CA|800382CA","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","Product Overview":"8xD, Coolant Thru, EgiAs coating","Web Video 3":"https://www.youtube.com/watch?v=35yVUYJzzx0","Web Video 2":"https://www.youtube.com/watch?v=EckQITvhvB8","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Aluminum : 6061; 7075":"N; Good","List Name":"ADO-8D","Hardened Steels : 45-50 HRC":"H; Good","Web Video 1":"https://www.youtube.com/watch?v=wd3tVuwRzgE","Aluminum : Casting":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Units":["Inch","Metric"],"Stainless Steels : 17-4PH":"M; Good","Feature 3":"Internal coolant holes","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Feature 1":"OSG's EgiAs Nano Coating Technology","Point Thinning":"R Thinning","Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","Cutting Direction":"RH","High Carbon Steel : 1065":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011"],"Feature 2":"Wavy form cutting edge design","Length of Cut - Specification":"TAPER","Nickel Alloy : Inconel":"S; Good","Full Description":"The A Brand ADO drill series is OSG's premium line of carbide coolant-fed high performance drills, designed to drill in a variety of steels up to 50X diameter without pecking. New point geometry creates sharp cutting action for reduced thrust forces, while our proprietary EgiAs coating provides drastically higher hardness and heat resistance, enabling higher drilling speeds and incredible tool life.","Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027"],"Titanium : 6AL4V (30HRC)":"S; Good","Benefit 2":"Sharper cutting action reduces thrust forces and produces smaller chips for easy hole processing","Coolant Thru":"Yes","Notes":"Sizes ≤2.90 mm have a single margin. Sizes ≥3 mm have a double margin.","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["3/32","7/64","1/8","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","1/2","17/32","9/16","5/8"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.34375","0.4375","0.5","0.625"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["E","F","Q"],"Diameter-Sizes":"0.07874\" - 15.875mm","Flute-Sizes":"22mm - 175mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"75mm - 241mm","Shank-Sizes":"3mm - 16mm","Friendly Name":"6520","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206530/Drills_-_Drill_-_EXOCARB_ADO_-_List_6530_-_10D_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206530/Drills_-_Drill_-_A_Brand_ADO_-_List_6530_-_10D_-_Angle_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206530/Drills_-_Drill_-_A_Brand_ADO_-_List_6530_-_10D_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206530/Drills_-_Drill_-_A_Brand_ADO_-_Group_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%206530/Drills_-_Drill_-_A_Brand_ADO_-_List_6530_-_10D_-_Angle_1"],"Number of Flutes":"2","Drilling L/D Ratio (xD)":"10","Shank Diameter - Metric (d)":["3","4","6","8","10","12","5","7","9","11","14"],"Diameter - Inch (D)":["0.07874","0.08268","0.08661","0.09055","0.09375","0.09449","0.09843","0.10236","0.1063","0.109375","0.11024","0.11417","0.12205","0.125","0.12598","0.12992","0.13386","0.14173","0.14567","0.14961","0.15354","0.15625","0.161","0.1875","0.20079","0.203125","0.20472","0.20866","0.213","0.2126","0.21875","0.22047","0.22441","0.22835","0.23228","0.25","0.257","0.265625","0.27953","0.28125","0.28346","0.2874","0.29134","0.29921","0.30315","0.30709","0.31102","0.3125","0.332","0.34375","0.35827","0.3622","0.36614","0.37008","0.375","0.37795","0.38189","0.38583","0.38976","0.421875","0.43701","0.4375","0.44094","0.44488","0.44882","0.45276","0.453125","0.45669","0.46063","0.46457","0.4685","0.5","0.5625","0.11811","0.1378","0.15748","0.17717","0.19685","0.21654","0.23622","0.24409","0.25591","0.27559","0.29528","0.31496","0.32677","0.33465","0.35433","0.37402","0.3937","0.43307","0.47244","0.16142","0.16535","0.16929","0.17323","0.1811","0.18504","0.18898","0.19291","0.24016","0.24803","0.25197","0.25984","0.26378","0.26772","0.27165","0.3189","0.32283","0.33071","0.33858","0.34252","0.34646","0.35039","0.39764","0.40157","0.40551","0.40945","0.41339","0.41732","0.42126","0.4252","0.42913","0.49213"],"Overall Length - Metric (L)":["75","90","100","115","128","140","155","165","190","205","215","230"],"Flute Length - Metric (FL)":["26","33","40","45","50","55","65","70","78","87","90","100","105","110","115","125","130","145","155","180","60","140"],"Diameter - Metric (D)":["2","2.1","2.2","2.3","2.381","2.4","2.5","2.6","2.7","2.778","2.8","2.9","3.1","3.175","3.2","3.3","3.4","3.6","3.7","3.8","3.9","3.969","4.089","4.763","5.1","5.159","5.2","5.3","5.41","5.4","5.556","5.6","5.7","5.8","5.9","6.35","6.528","6.747","7.1","7.144","7.2","7.3","7.4","7.6","7.7","7.8","7.9","7.938","8.433","8.731","9.1","9.2","9.3","9.4","9.525","9.6","9.7","9.8","9.9","10.716","11.1","11.113","11.2","11.3","11.4","11.5","11.509","11.6","11.7","11.8","11.9","12.7","14.288","3","3.5","4","4.5","5","5.5","6","6.2","6.5","7","7.5","8","8.3","8.5","9","9.5","10","11","12","4.1","4.2","4.3","4.4","4.6","4.7","4.8","4.9","6.1","6.3","6.4","6.6","6.7","6.8","6.9","8.1","8.2","8.4","8.6","8.7","8.8","8.9","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","12.5"],"Helix Angle - Degree":"30","Substrate":"Carbide","Benefit 3":"Coolant delivery at the cutting edge reduces heat and improves chip evacuation, thereby increasing tool life and enabling faster drilling speeds.","Web Literature 1":["8002024CA-DR,162|8002024CA-DRT,3","8002024CA-DR,258|8002024CA-DRT,3","8002024CA-DR,199|8002024CA-DRT,3","8002024CA-DR,122|8002024CA-DRT,3","8002024CA-DR,31|8002024CA-DRT,3","8002024CA-DR,283|8002024CA-DRT,3"],"Shank Tolerance":"h6","Cutting Diameter Tolerance Specification":"e8","Surface Treatment":"EgiAs","Web Literature 2":"800284CA-V3|800284CA-V3","Short Description":"High Performance Coolant-Fed Carbide Drills for Ferrous and Non-Ferrous Materials","Benefit 1":"Higher coating oxidation temp & hardness dramatically improve wear resistance","Web Literature 4":"800387CA","Web Literature 3":"80065CA|800362CA|800363CA|800382CA","Cast Iron":"K; Best","Web Video 3":"https://www.youtube.com/watch?v=35yVUYJzzx0","Hardened Steels : 35 HRC":"H; Good","Web Video 2":"https://www.youtube.com/watch?v=EckQITvhvB8","Low Carbon Steel : 1010; 1018":"P; Best","List Name":"ADO-10D","Web Video 1":"https://www.youtube.com/watch?v=wd3tVuwRzgE","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Feature 3":"Internal coolant holes","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Feature 1":"OSG's EgiAs Nano Coating Technology","Point Thinning":"R Thinning","Units":["Metric","Inch"],"Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","Cutting Direction":"RH","High Carbon Steel : 1065":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Feature 2":"Wavy form cutting edge design","Length of Cut - Specification":"TAPER","Full Description":"The A Brand ADO drill series is OSG's premium line of carbide coolant-fed high performance drills, designed to drill in a variety of steels up to 50X diameter without pecking. New point geometry creates sharp cutting action for reduced thrust forces, while our proprietary EgiAs coating provides drastically higher hardness and heat resistance, enabling higher drilling speeds and incredible tool life.","Benefit 2":"Sharper cutting action reduces thrust forces and produces smaller chips for easy hole processing","Coolant Thru":"Yes","Cutting Diameter Tolerance - Inch":["-0.0006 / -0.0011","-0.0008 / -0.0015","-0.0010 / -0.0019","-0.0013 / -0.0023"],"Cutting Diameter Tolerance - Metric":["-0.014 / -0.028","-0.020 / -0.038","-0.025 / -0.047","-0.032 / -0.059"],"Product Overview":"10xD, Coolant Thru, EgiAs coating","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["3/32","7/64","1/8","5/32","3/16","13/64","7/32","1/4","17/64","9/32","5/16","11/32","3/8","27/64","7/16","29/64","1/2","9/16"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["E","F","Q"],"Diameter-Sizes":"0.07874\" - 14.288mm","Flute-Sizes":"26mm - 180mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"75mm - 230mm","Shank-Sizes":"3mm - 0.625\"","Friendly Name":"6530","CategoryBrand":"A Brand"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FTaper%20Drills%2FList%20HP258/Drills_-_Drill_-_HY-PRO_CARB_-_List_HP258_-_Catalog_2"],"Diameter - Metric (D)":["3","3.1","3.175","3.2","3.3","3.4","3.5","3.572","3.6","3.7","3.8","3.9","3.969","4","4.089","4.1","4.2","4.3","4.366","4.4","4.5","4.6","4.65","4.7","4.763","4.8","4.9","5","5.1","5.159","5.2","5.3","5.4","5.41","5.5","5.556","5.6","5.7","5.8","5.9","5.953","6","6.1","6.2","6.3","6.35","6.4","6.5","6.528","6.6","6.7","6.746","6.8","6.9","7","7.1","7.145","7.2","7.3","7.4","7.5","7.541","7.6","7.7","7.8","7.9","7.938","8","8.1","8.2","8.3","8.334","8.4","8.433","8.5","8.6","8.7","8.733","8.8","8.9","9","9.1","9.129","9.2","9.25","9.3","9.4","9.5","9.525","9.6","9.7","9.8","9.9","9.921","10","10.1","10.2","10.3","10.319","10.4","10.5","10.6","10.7","10.716","10.8","10.9","11","11.1","11.113","11.2","11.3","11.4","11.5","11.509","11.6","11.7","11.8","11.9","11.908","12","12.1","12.2","12.3","12.4","12.5","12.6","12.7","12.8","12.9","13","13.1","13.2","13.3","13.4","13.495","13.5","13.7","14","14.288","14.5","14.684","14.7","15","15.083","15.5","15.7","15.875","16","16.5","16.669","17","17.5","18","18.5","19","19.05","19.5","20"],"Number of Flutes":"2","Drilling L/D Ratio (xD)":"8","Diameter - Inch (D)":["0.11811","0.12205","0.125","0.12598","0.12992","0.13386","0.1378","0.140625","0.14173","0.14567","0.14961","0.15354","0.15625","0.15748","0.161","0.16142","0.16535","0.16929","0.171875","0.17323","0.17717","0.1811","0.18307","0.18504","0.1875","0.18898","0.19291","0.19685","0.20079","0.203125","0.20472","0.20866","0.2126","0.213","0.21654","0.21875","0.22047","0.22441","0.22835","0.23228","0.234375","0.23622","0.24016","0.24409","0.24803","0.25","0.25197","0.25591","0.257","0.25984","0.26378","0.265625","0.26772","0.27165","0.27559","0.27953","0.28125","0.28346","0.2874","0.29134","0.29528","0.296875","0.29921","0.30315","0.30709","0.31102","0.3125","0.31496","0.3189","0.32283","0.32677","0.328125","0.33071","0.332","0.33465","0.33858","0.34252","0.34375","0.34646","0.35039","0.35433","0.35827","0.359375","0.3622","0.36417","0.36614","0.37008","0.37402","0.375","0.37795","0.38189","0.38583","0.38976","0.390625","0.3937","0.39764","0.40157","0.40551","0.40625","0.40945","0.41339","0.41732","0.42126","0.421875","0.4252","0.42913","0.43307","0.43701","0.4375","0.44094","0.44488","0.44882","0.45276","0.453125","0.45669","0.46063","0.46457","0.4685","0.46875","0.47244","0.47638","0.48031","0.48425","0.48819","0.49213","0.49606","0.5","0.50394","0.50787","0.51181","0.51575","0.51969","0.52362","0.52756","0.53125","0.5315","0.53937","0.55118","0.5625","0.57087","0.578125","0.57874","0.59055","0.59375","0.61024","0.61811","0.625","0.62992","0.64961","0.65625","0.66929","0.68898","0.70866","0.72835","0.74803","0.75","0.76772","0.7874"],"Shank Diameter - Metric (d)":["4","6","8","10","12","14","16","18","20"],"Overall Length - Metric (L)":["77","81","85","90","97","106","116","131","139","155","163","182","204","223","244"],"Flute Length - Metric (FL)":["34","36","43","45","50","57","66","76","87","95","106","114","133","152","171","190"],"Helix Angle - Degree":"30","Substrate":"Carbide","Feature 4":"DIN Shanks (6, 8, 10, 12, 14, 16, 18, 20mm)","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,30","Shank Tolerance":"h6","Web Literature 2":"800220CA-V6","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"Higher coating oxidation temp & hardness dramatically improve wear resistance","List Name":"HP-OH-8D","Web Literature 4":"800387CA","Product Overview":"8D, Coolant Thru, EgiAs","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Benefit 4":"Larger shank provides more rigidity and minimizes the number of holders/collets needed to accommodate all sizes","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Aluminum : Casting":"N; Good","Feature 1":"Negative Radial Rake","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Short Description":"Performance Carbide Coolant Drills for a Variety of Materials & Applications","Cutting Diameter Tolerance Specification":"m7","Benefit 2":"Provides more consistent performance from the first hole to the last hole","Point Thinning":"R Thinning","Feature 2":"Refined honing on cutting edge","Units":["Metric","Inch"],"Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Cutting Direction":"RH","Benefit 1":"Stronger cutting edge to resist chipping","Helix Direction":"RH","Length of Cut - Specification":"TAPER","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Full Description":"The HY-PRO CARB carbide drill series is an ideal blend of performance and cost-efficiency. Strong radial rake combined with precision point geometry and EgiAs coating makes this drill extremely versatile in application. Be it solid or coolant-through, these drills yield incredible performance at depths from 3X to 8X Diameter.","Cutting Diameter Tolerance - Inch":["+0.0001 / +0.0005","+0.0002 / +0.0006","+0.0002 / +0.0008","+0.0003 / +0.0010","+0.0003 / +0.0011"],"Cutting Diameter Tolerance - Metric":["+0.002 / +0.012","+0.004 / +0.016","+0.006 / +0.021","+0.007 / +0.025","+0.008 / +0.029"],"Coolant Thru":"Yes","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","1/2","17/32","9/16","37/64","19/32","5/8","21/32","3/4"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["E","F","Q"],"Diameter-Sizes":"0.11811\" - 20mm","Flute-Sizes":"34mm - 190mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"77mm - 244mm","Shank-Sizes":"4mm - 20mm","Friendly Name":"HP258","CategoryBrand":"HY-PRO CARB"}