DRILLING - SOLID - DRILLING - JOBBER

1500

1500

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["11","12","10","9","8","7","6"],"Diameter - Inch (D)":["0.0785","0.081","0.082","0.086","0.089","0.0935","0.09375","0.096","0.098","0.0995","0.1015","0.104","0.1065","0.109375","0.11","0.111","0.113","0.116","0.12","0.125","0.1285","0.136","0.1405","0.140625","0.144","0.147","0.1495","0.152","0.154","0.15625","0.157","0.159","0.161","0.166","0.1695","0.171875","0.173","0.177","0.18","0.182","0.185","0.1875","0.189","0.191","0.1935","0.196","0.199","0.201","0.203125","0.204","0.2055","0.209","0.213","0.21875","0.221","0.228","0.234","0.234375","0.238","0.242","0.246","0.25","0.257","0.261","0.265625","0.272","0.277","0.28125","0.29","0.295","0.296875","0.302","0.3125","0.316","0.323","0.328125","0.332","0.339","0.34375","0.348","0.358","0.359375","0.368","0.375","0.377","0.386","0.390625","0.397","0.404","0.40625","0.413","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.53125","0.5625","0.578125","0.59375","0.625","0.65625","0.6875","0.71875","0.75"],"Overall Length - Metric (L)":["57","60","63","66","71","73","74","77","80","84","87","90","92","95","104","107","109","112","115","119","120","123","127","130","133","134","138","145","148","151","153","156","159","162","164","167","182","199","210","235","216"],"Flute Length - Metric (FL)":["25","28","31","34","36","38","41","44","47","50","53","55","58","61","63","66","69","73","74","77","80","84","87","88","92","95","98","100","103","106","109","111","114","122","131","142","149"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.375","0.5","0.625","0.75","0.875"],"Diameter - Metric (D)":["1.994","2.057","2.083","2.184","2.261","2.375","2.381","2.438","2.489","2.527","2.578","2.642","2.705","2.778","2.794","2.819","2.87","2.946","3.048","3.175","3.264","3.454","3.569","3.572","3.658","3.734","3.797","3.861","3.912","3.969","3.988","4.039","4.089","4.216","4.305","4.366","4.394","4.496","4.572","4.623","4.699","4.763","4.801","4.851","4.915","4.978","5.055","5.105","5.159","5.182","5.22","5.309","5.41","5.556","5.613","5.791","5.944","5.953","6.045","6.147","6.248","6.35","6.528","6.629","6.747","6.909","7.036","7.144","7.366","7.493","7.541","7.671","7.938","8.026","8.204","8.334","8.433","8.611","8.731","8.839","9.093","9.128","9.347","9.525","9.576","9.804","9.922","10.084","10.262","10.319","10.49","10.716","11.113","11.509","11.906","12.303","12.7","13.494","14.288","14.684","15.081","15.875","16.669","17.463","18.256","19.05"],"Helix Angle - Degree":"30","Diameter - Wire Gage (D)":["47","46","45","44","43","42","41","40","39","38","37","36","35","34","33","32","31","30","29","28","27","26","25","24","23","22","21","20","19","18","17","16","15","14","13","12","11","10","9","8","7","6","5","4","3","2","1"],"Short Description":"Cobalt-HSS Drills for Drilling in a Variety of Materials","Web Literature 1":["8002024CA-DR,197|8002024CA-DRT,48","8002024CA-DR,198|8002024CA-DRT,48"],"Cutting Diameter Tolerance Specification":"h8","List Name":"EX-GDR","Web Literature 4":"800387CA","Brand":"EX-GOLD","Substrate":"HSS-CO","Product Overview":"HSS-Co, Jobber Length, TiN Coating","Feature 2":"HSS-Cobalt Substrate","Hardened Steels : 35 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Benefit 2":"Added hardness versus ordinary HSS, yet exceptional toughness provides exceptional versatility in any application.","Aluminum : Casting":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Units":"Inch","Stainless Steels : 17-4PH":"M; Good","Benefit 3":"Increased hardness and lubricitiy inceases wear resistance thereby extending tool life.","Coolant Thru":"No","High Carbon Steel : 1065":"P; Good","Benefit 1":"No center drills neeeded. Achieves high accuracy while reducing drill thrust force for longer tool life.","Alloy Steels : 4140; 4340":"P; Best","Feature 1":"Radial Point Thinning","Cutting Direction":"RH","Die Steels":"P; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Helix Direction":"RH","Surface Treatment":"TiN","Feature 3":"Titanium Nitride Coating","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011","+0 / -0.0013"],"Length of Cut - Specification":["TAPER","EXTRA LONG"],"Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027","+0 / -0.033"],"Full Description":"The Ex-Gold drill line is famous worldwide for its incredible performace in nearly all material families. From cast iron and hardened alloy steel to manual machines or CNC controls, this drill has the toughness and durability to perform. Available in stub and jobber lengths in a complete stocked size offering.","Point Thinning":["X Thinning","R Thinning"],"Point Angle - Degree (α)":"130","Diameter - Fractional Size (D)":["3/32","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","17/32","9/16","37/64","19/32","5/8","21/32","11/16","23/32","3/4"],"Diameter - Letter Size (D)":["A","B","C","D","E","F","G","I","J","L","M","N","O","P","Q","R","S","T","U","V","W","X","Y","Z"],"Diameter-Sizes":"0.0785\" - 19.05mm","Flute-Sizes":"25mm - 149mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"57mm - 235mm","Shank-Sizes":"0.125\" - 0.875\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%201500/Drills_-_Drill_-_EX-GOLD_-_List_1500_-_Catalog"],"Friendly Name":"1500"}
1600

1600

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["10","9","11","8","7","6","5","4","3"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12","16","20","25","32"],"Diameter - Inch (D)":["0.07874","0.08268","0.08661","0.09055","0.09449","0.09843","0.10236","0.1063","0.11024","0.11417","0.11811","0.12205","0.12598","0.12992","0.13386","0.1378","0.14173","0.14567","0.14961","0.15354","0.15748","0.16142","0.16535","0.16929","0.17323","0.17717","0.1811","0.18504","0.18898","0.19291","0.19685","0.20079","0.20472","0.20866","0.2126","0.21654","0.22047","0.22441","0.22835","0.23228","0.23622","0.24016","0.24409","0.24803","0.25197","0.25591","0.25984","0.26378","0.26772","0.27165","0.27559","0.27953","0.28346","0.2874","0.29134","0.29528","0.29921","0.30315","0.30709","0.31102","0.31496","0.3189","0.32283","0.32677","0.33071","0.33465","0.33858","0.34252","0.34646","0.35039","0.35433","0.35827","0.3622","0.36614","0.37008","0.37402","0.37795","0.38189","0.38583","0.38976","0.3937","0.39764","0.40157","0.40551","0.40945","0.41339","0.41732","0.42126","0.4252","0.42913","0.43307","0.43701","0.44094","0.44488","0.44882","0.45276","0.45669","0.46063","0.46457","0.4685","0.47244","0.47638","0.48031","0.48425","0.48819","0.49213","0.49606","0.5","0.50394","0.50787","0.51181","0.5315","0.55118","0.55512","0.57087","0.59055","0.61024","0.61417","0.62992","0.64961","0.66929","0.68898","0.69291","0.70866","0.72835","0.74803","0.76772","0.77165","0.7874","0.80709","0.82677","0.84646","0.86614","0.88583","0.90551","0.9252","0.94488","0.96457","0.98425","1.00394","1.02362","1.04331","1.06299","1.10236","1.14173","1.1811","1.22047","1.25984","0.07913","0.07953","0.07992","0.08031","0.08071","0.0811","0.0815","0.08189","0.08228","0.08307","0.08346","0.08386","0.08425","0.08465","0.08504","0.08543","0.08583","0.08622","0.08701","0.0874","0.0878","0.08819","0.08858","0.08898","0.08937","0.08976","0.09016","0.09094","0.09134","0.09173","0.09213","0.09252","0.09291","0.09331","0.0937","0.09409","0.09488","0.09528","0.09567","0.09606","0.09646","0.09685","0.09724","0.09764","0.09803","0.09882","0.09921","0.09961","0.1","0.10039","0.10079","0.10118","0.10157","0.10197","0.10276","0.10315","0.10354","0.10394","0.10433","0.10472","0.10512","0.10551","0.10591","0.10669","0.10709","0.10748","0.10787","0.10827","0.10866","0.10906","0.10945","0.10984","0.11063","0.11102","0.11142","0.11181","0.1122","0.1126","0.11299","0.11339","0.11378","0.11457","0.11496","0.11535","0.11575","0.11614","0.11654","0.11693","0.11732","0.11772","0.1185","0.1189","0.11929","0.11969","0.12008","0.12047","0.12087","0.12126","0.12165","0.12244","0.12283","0.12323","0.12362","0.12402","0.12441","0.1248","0.1252","0.12559","0.12638","0.12677","0.12717","0.12756","0.12795","0.12835","0.12874","0.12913","0.12953","0.13031","0.13071","0.1311","0.1315","0.13189","0.13228","0.13268","0.13307","0.13346","0.13425","0.13465","0.13504","0.13543","0.13583","0.13622","0.13661","0.13701","0.1374","0.13819","0.13858","0.13898","0.13937","0.13976","0.14016","0.14055","0.14094","0.14134","0.14213","0.14252","0.14291","0.14331","0.1437","0.14409","0.14449","0.14488","0.14528","0.14606","0.14646","0.14685","0.14724","0.14764","0.14803","0.14843","0.14882","0.14921","0.15","0.15039","0.15079","0.15118","0.15157","0.15197","0.15236","0.15276","0.15315","0.15394","0.15433","0.15472","0.15512","0.15551","0.15591","0.1563","0.15669","0.15709","0.15787","0.15827","0.15866","0.15906","0.15945","0.15984","0.16024","0.16063","0.16102","0.16181","0.1622","0.1626","0.16299","0.16339","0.16378","0.16417","0.16457","0.16496","0.16575","0.16614","0.16654","0.16693","0.16732","0.16772","0.16811","0.1685","0.1689","0.16969","0.17008","0.17047","0.17087","0.17126","0.17165","0.17205","0.17244","0.17283","0.17362","0.17402","0.17441","0.1748","0.1752","0.17559","0.17598","0.17638","0.17677","0.17756","0.17795","0.17835","0.17874","0.17913","0.17953","0.17992","0.18031","0.18071","0.1815","0.18189","0.18228","0.18268","0.18307","0.18346","0.18386","0.18425","0.18465","0.18543","0.18583","0.18622","0.18661","0.18701","0.1874","0.1878","0.18819","0.18858","0.18937","0.18976","0.19016","0.19055","0.19094","0.19134","0.19173","0.19213","0.19252","0.19331","0.1937","0.19409","0.19449","0.19488","0.19528","0.19567","0.19606","0.19646","0.19724","0.19764","0.19803","0.19843","0.19882","0.19921","0.19961","0.2","0.20039","0.20118","0.20157","0.20197","0.20236","0.20276","0.20315","0.20354","0.20394","0.20433","0.20512","0.20551","0.20591","0.2063","0.20669","0.20709","0.20748","0.20787","0.20827","0.20906","0.20945","0.20984","0.21024","0.21063","0.21102","0.21142","0.21181","0.2122","0.21299","0.21339","0.21378","0.21417","0.21457","0.21496","0.21535","0.21575","0.21614","0.21693","0.21732","0.21772","0.21811","0.2185","0.2189","0.21929","0.21969","0.22008","0.22087","0.22126","0.22165","0.22205","0.22244","0.22283","0.22323","0.22362","0.22402","0.2248","0.2252","0.22559","0.22598","0.22638","0.22677","0.22717","0.22756","0.22795","0.22874","0.22913","0.22953","0.22992","0.23031","0.23071","0.2311","0.2315","0.23189","0.23268","0.23307","0.23346","0.23386","0.23425","0.23465","0.23504","0.23543","0.23583","0.23819","0.24213","0.24606","0.25","0.25394","0.25787","0.26181","0.26575","0.26969","0.27362","0.27756","0.2815","0.28543","0.28937","0.29331","0.29724","0.30118","0.30512","0.30906","0.31299","0.31693","0.32087","0.3248","0.32874","0.33268","0.33661","0.34055","0.34449","0.34843","0.35236","0.3563","0.36024","0.36417","0.36811","0.37205","0.37598","0.37992","0.38386","0.3878","0.39173","0.39567","0.39961","0.40354","0.40748","0.41142","0.41535","0.41929","0.42323","0.42717","0.4311","0.43504","0.43898","0.44291","0.44685","0.45079","0.45472","0.45866","0.4626","0.46654","0.47047"],"Overall Length - Metric (L)":["56","59","62","65","68","71","75","87","91","96","101","107","113","119","125","131","137","144","151","158","166","169","172","181","184","188","191","204","208","212","216","225","230","235","240","245"],"Flute Length - Metric (FL)":["24","27","30","33","36","39","43","47","52","57","63","69","75","81","87","94","101","106","109","112","115","118","122","125","128","132","136","140","145","150","155","160","165"],"Diameter - Metric (D)":["2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.3","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.3","11.4","11.5","11.6","11.7","11.8","11.9","12","12.1","12.2","12.3","12.4","12.5","12.6","12.7","12.8","12.9","13","13.5","14","14.1","14.5","15","15.5","15.6","16","16.5","17","17.5","17.6","18","18.5","19","19.5","19.6","20","20.5","21","21.5","22","22.5","23","23.5","24","24.5","25","25.5","26","26.5","27","28","29","30","31","32","2.01","2.02","2.03","2.04","2.05","2.06","2.07","2.08","2.09","2.11","2.12","2.13","2.14","2.15","2.16","2.17","2.18","2.19","2.21","2.22","2.23","2.24","2.25","2.26","2.27","2.28","2.29","2.31","2.32","2.33","2.34","2.35","2.36","2.37","2.38","2.39","2.41","2.42","2.43","2.44","2.45","2.46","2.47","2.48","2.49","2.51","2.52","2.53","2.54","2.55","2.56","2.57","2.58","2.59","2.61","2.62","2.63","2.64","2.65","2.66","2.67","2.68","2.69","2.71","2.72","2.73","2.74","2.75","2.76","2.77","2.78","2.79","2.81","2.82","2.83","2.84","2.85","2.86","2.87","2.88","2.89","2.91","2.92","2.93","2.94","2.95","2.96","2.97","2.98","2.99","3.01","3.02","3.03","3.04","3.05","3.06","3.07","3.08","3.09","3.11","3.12","3.13","3.14","3.15","3.16","3.17","3.18","3.19","3.21","3.22","3.23","3.24","3.25","3.26","3.27","3.28","3.29","3.31","3.32","3.33","3.34","3.35","3.36","3.37","3.38","3.39","3.41","3.42","3.43","3.44","3.45","3.46","3.47","3.48","3.49","3.51","3.52","3.53","3.54","3.55","3.56","3.57","3.58","3.59","3.61","3.62","3.63","3.64","3.65","3.66","3.67","3.68","3.69","3.71","3.72","3.73","3.74","3.75","3.76","3.77","3.78","3.79","3.81","3.82","3.83","3.84","3.85","3.86","3.87","3.88","3.89","3.91","3.92","3.93","3.94","3.95","3.96","3.97","3.98","3.99","4.01","4.02","4.03","4.04","4.05","4.06","4.07","4.08","4.09","4.11","4.12","4.13","4.14","4.15","4.16","4.17","4.18","4.19","4.21","4.22","4.23","4.24","4.25","4.26","4.27","4.28","4.29","4.31","4.32","4.33","4.34","4.35","4.36","4.37","4.38","4.39","4.41","4.42","4.43","4.44","4.45","4.46","4.47","4.48","4.49","4.51","4.52","4.53","4.54","4.55","4.56","4.57","4.58","4.59","4.61","4.62","4.63","4.64","4.65","4.66","4.67","4.68","4.69","4.71","4.72","4.73","4.74","4.75","4.76","4.77","4.78","4.79","4.81","4.82","4.83","4.84","4.85","4.86","4.87","4.88","4.89","4.91","4.92","4.93","4.94","4.95","4.96","4.97","4.98","4.99","5.01","5.02","5.03","5.04","5.05","5.06","5.07","5.08","5.09","5.11","5.12","5.13","5.14","5.15","5.16","5.17","5.18","5.19","5.21","5.22","5.23","5.24","5.25","5.26","5.27","5.28","5.29","5.31","5.32","5.33","5.34","5.35","5.36","5.37","5.38","5.39","5.41","5.42","5.43","5.44","5.45","5.46","5.47","5.48","5.49","5.51","5.52","5.53","5.54","5.55","5.56","5.57","5.58","5.59","5.61","5.62","5.63","5.64","5.65","5.66","5.67","5.68","5.69","5.71","5.72","5.73","5.74","5.75","5.76","5.77","5.78","5.79","5.81","5.82","5.83","5.84","5.85","5.86","5.87","5.88","5.89","5.91","5.92","5.93","5.94","5.95","5.96","5.97","5.98","5.99","6.05","6.15","6.25","6.35","6.45","6.55","6.65","6.75","6.85","6.95","7.05","7.15","7.25","7.35","7.45","7.55","7.65","7.75","7.85","7.95","8.05","8.15","8.25","8.35","8.45","8.55","8.65","8.75","8.85","8.95","9.05","9.15","9.25","9.35","9.45","9.55","9.65","9.75","9.85","9.95","10.05","10.15","10.25","10.35","10.45","10.55","10.65","10.75","10.85","10.95","11.05","11.15","11.25","11.35","11.45","11.55","11.65","11.75","11.85","11.95"],"Feature 4":"As small as 0.5mm in diameter increments every 0.01mm (0.0004\").","Helix Angle - Degree":"40","Web Literature 1":["8002024CA-DR,258|8002024CA-DRT,49","8002024CA-DR,254|8002024CA-DRT,49","8002024CA-DR,221|8002024CA-DRT,49","8002024CA-DR,245|8002024CA-DRT,49","8002024CA-DR,238|8002024CA-DRT,49","8002024CA-DR,239|8002024CA-DRT,49","8002024CA-DR,275|8002024CA-DRT,49","8002024CA-DR,224|8002024CA-DRT,49","8002024CA-DR,225|8002024CA-DRT,49","8002024CA-DR,227|8002024CA-DRT,49","8002024CA-DR,250|8002024CA-DRT,49","8002024CA-DR,269|8002024CA-DRT,49","8002024CA-DR,237|8002024CA-DRT,49","8002024CA-DR,273|8002024CA-DRT,49","8002024CA-DR,230|8002024CA-DRT,49","8002024CA-DR,242|8002024CA-DRT,49","8002024CA-DR,279|8002024CA-DRT,49","8002024CA-DR,236|8002024CA-DRT,49","8002024CA-DR,240|8002024CA-DRT,49","8002024CA-DR,231|8002024CA-DRT,49","8002024CA-DR,283|8002024CA-DRT,49"],"Short Description":"Drills Designed for Stainless Steel","Cutting Diameter Tolerance Specification":"h8","Brand":"EX-GOLD","Web Literature 4":"800387CA","List Name":"EX-SUS-GDR","Substrate":"HSSE","Product Overview":"Jobber, HSS-Va, High Helix, X-Thinning, TiN","Feature 2":"HSS-Vanadium Substrate","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 2":"Added heat resistance via 3% Vanadium content yields superior performance to standard High Speed Steel drills.","Low Carbon Steel : 1010; 1018":"P; Best","Stainless Steels : 300":"M; Best","Stainless Steels : 400":"M; Best","Benefit 3":"Increased hardness and lubricitiy inceases wear resistance thereby extending tool life.","Stainless Steels : 17-4PH":"M; Good","Coolant Thru":"No","Benefit 1":"No center drills neeeded. Achieves high accuracy high shearing forces ideal in gummy materials.","Medium Carbon Steel : 1035; 1045":"P; Good","Notes":"Other coatings are available upon request.","Units":["Metric","Inch"],"Benefit 4":"Over 3,500 sizes available from stock, with diameter tolerances that can replace reaming operations","Cutting Direction":"RH","View Catalog Page":"Here","View Speed and Feed Page":"Here","Surface Treatment":["TiN","TiAlN"],"Helix Direction":"RH","Feature 3":"Titanium Nitride Coating","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011","+0 / -0.0013","+0 / -0.0015"],"Point Thinning":["S Thinning","N Thinning"],"Length of Cut - Specification":["TAPER","JOBBER","STUB"],"Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027","+0 / -0.033","+0 / -0.039"],"Full Description":"The Ex-SUS-Gold drill line is famous worldwide for its incredible performace gummy materials, like stainless steel. Its high helix and refine X-thinning point geometry yield incredible sharpness, which make it the ideal solution for processing soft materials. Available in stub and jobber lengths and in diameter increments of every 0.0004\" (0.01mm).","Feature 1":"X-Thining Point Geometry","Point Angle - Degree (α)":["130","120"],"Diameter - Letter Size (D)":"E","Diameter - Fractional Size (D)":["1/4"],"Diameter-Sizes":"0.07874\" - 32mm","Flute-Sizes":"24mm - 165mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"56mm - 245mm","Shank-Sizes":"3mm - 32mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%201600/Drills_-_Drill_-_EX-GOLD_EX-SUS-GOLD_-_List_1600_-_Catalog"],"Friendly Name":"1600"}
1650

1650

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["10","11","9","8","7","6"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12"],"Diameter - Inch (D)":["0.089","0.09375","0.1015","0.113","0.125","0.136","0.140625","0.1495","0.15625","0.159","0.1875","0.201","0.203125","0.213","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.07874","0.09055","0.09843","0.10236","0.11024","0.11811","0.12992","0.13386","0.1378","0.15748","0.16535","0.16929","0.17717","0.19685","0.20079","0.20472","0.21654","0.23622","0.26772","0.27165","0.27559","0.31496","0.33465","0.33858","0.34646","0.35433","0.3937","0.40551","0.40945","0.41339","0.43307","0.47244"],"Overall Length - Metric (L)":["59","62","65","68","71","75","87","96","101","107","119","131","151","158","56","91","113","125","137","144"],"Flute Length - Metric (FL)":["27","30","33","36","39","43","52","57","63","75","81","94","101","24","47","69","87"],"Diameter - Metric (D)":["2.261","2.381","2.578","2.87","3.175","3.454","3.572","3.797","3.969","4.039","4.763","5.105","5.159","5.41","5.556","6.35","7.938","9.525","11.113","12.7","2","2.3","2.5","2.6","2.8","3","3.3","3.4","3.5","4","4.2","4.3","4.5","5","5.1","5.2","5.5","6","6.8","6.9","7","8","8.5","8.6","8.8","9","10","10.3","10.4","10.5","11","12"],"Helix Angle - Degree":"40","Diameter - Wire Gage (D)":["43","38","33","29","25","21","7","3"],"Web Literature 1":["8002024CA-DR,198|8002024CA-DRT,46","8002024CA-DR,283|8002024CA-DRT,46"],"Cutting Diameter Tolerance Specification":"h8","Web Literature 4":"800387CA","Benefit 3":"Higher coating oxidation temp & hardness dramatically improve wear resistance","Substrate":"HSSE","Product Overview":"Jobber, HSS-Va, High Helix, X-Thinning, WD1 Coating","Feature 2":"HSS-Vanadium Substrate","Aluminum : 6061; 7075":"N; Best","Hardened Steels : 35 HRC":"H; Good","Cast Iron":"K; Good","Aluminum : Casting":"N; Best","Low Carbon Steel : 1010; 1018":"P; Best","Benefit 2":"Added heat resistance via 3% Vanadium content yields superior performance to standard High Speed Steel drills.","Medium Carbon Steel : 1035; 1045":"P; Best","Units":["Inch","Metric"],"Stainless Steels : 17-4PH":"M; Good","Brand":"NEXUS","List Name":"NEXUS-GDR","Coolant Thru":"No","High Carbon Steel : 1065":"P; Good","Stainless Steels : 300":"M; Good","Benefit 1":"No center drills neeeded. Achieves high accuracy high shearing forces ideal in gummy materials.","Stainless Steels : 400":"M; Good","Feature 3":"OSG's WD1 Nano Coating","Short Description":"Performance Drills Designed for Stainless Steel","Alloy Steels : 4140; 4340":"P; Best","Cutting Direction":"RH","Die Steels":"P; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011"],"Point Thinning":"S Thinning","Length of Cut - Specification":"TAPER","Surface Treatment":"WD1","Nickel Alloy : Inconel":"S; Good","Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027"],"Titanium : 6AL4V (30HRC)":"S; Good","Feature 1":"X-Thining Point Geometry","Full Description":"The Nexus drill line is a high performance drill line designed for high performace gummy materials, like stainless steel. Its high helix and refine X-thinning point geometry yield incredible sharpness, which make it the ideal solution for processing soft materials. Available in stub and jobber lengths and features OSG's proprietary WD1 drill coating technology, which permits faster speeds and longer tool life in stainless steel applications.","Point Angle - Degree (α)":["130","120"],"Diameter - Fractional Size (D)":["3/32","1/8","9/64","5/32","3/16","13/64","7/32","1/4","5/16","3/8","7/16","1/2"],"Diameter - Letter Size (D)":"E","Diameter-Sizes":"0.07874\" - 12.7mm","Flute-Sizes":"24mm - 101mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"56mm - 158mm","Shank-Sizes":"3mm - 12mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%201650/Drills_-_Drill_-_NEXUS_-_List_1650_-_Catalog"],"Friendly Name":"1650"}
1700

1700

{"Diameter - Metric (D)":["5.953","6","6.35","6.528","6.747","6.909","7.144","7.541","7.938","8","8.334","8.731","9.128","9.525","9.576","9.922","10","10.319","10.716","11.113","11.509","11.906","12.303","12.7","13.494","14.288","14.684","15.081","15.875","16.669","17.463","18.256","19.05","19.844","20.638","21.431","22.225","23.019","23.813","24.606","25.4","26.194","26.988","27.781","28.575","30.956","31.75"],"Number of Flutes":"2","Overall Length - Metric (L)":["112","115","119","120","123","127","130","133","134","138","145","148","151","153","156","159","162","164","167","182","192","199","210","219","223","233","239","242","246","252","258","268","277"],"Drilling L/D Ratio (xD)":["9","10","8","7","6","5","4"],"Diameter - Inch (D)":["0.234375","0.23622","0.25","0.257","0.265625","0.272","0.28125","0.296875","0.3125","0.31496","0.328125","0.34375","0.359375","0.375","0.377","0.390625","0.3937","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.53125","0.5625","0.578125","0.59375","0.625","0.65625","0.6875","0.71875","0.75","0.78125","0.8125","0.84375","0.875","0.90625","0.9375","0.96875","1","1.03125","1.0625","1.09375","1.125","1.21875","1.25"],"Flute Length - Metric (FL)":["66","69","73","74","77","80","84","87","88","92","95","98","100","103","106","109","111","114","122","131","142","149","152","155","161","165","168","174","180","190","200"],"Shank Diameter - Inch (d)":["0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.65625","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.625","0.75","0.875","1","1.25"],"Helix Angle - Degree":"30","Web Literature 1":"8002024CA-DR,198|8002024CA-DRT,42","Product Overview":"Designed for a Wide Range of Materials, Coolant Thru","Short Description":"Designed for a Wide Range of Materials, Coolant Thru","Cutting Diameter Tolerance Specification":"h8","Web Literature 4":"800387CA","Substrate":"HSS-CO","Hardened Steels : 35 HRC":"H; Good","Cast Iron":"K; Good","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 35-45 HRC":"H; Good","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 300":"M; Best","Aluminum : Casting":"N; Good","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Units":["Inch","Metric"],"Stainless Steels : 17-4PH":"M; Good","Die Steels":"P; Good","Point Thinning":"R Thinning","Alloy Steels : 4140; 4340":"P; Best","Cutting Direction":"RH","High Carbon Steel : 1065":"P; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0007","+0 / -0.0009","+0 / -0.0011","+0 / -0.0013","+0 / -0.0015"],"Surface Treatment":"V","List Name":"V-HO-GDR","Full Description":"V-HO-GDR OIL HOLE Drills Designed for a Wide Range of Materials, Coolant Thru","Brand":"V-SERIES","Length of Cut - Specification":["TAPER","JOBBER","STUB"],"Titanium : 6AL4V (30HRC)":"S; Good","Cutting Diameter Tolerance - Metric":["+0 / -0.018","+0 / -0.022","+0 / -0.027","+0 / -0.033","+0 / -0.039"],"Coolant Thru":"Yes","Point Angle - Degree (α)":"130","Diameter - Fractional Size (D)":["15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","17/32","9/16","37/64","19/32","5/8","21/32","11/16","23/32","3/4","25/32","13/16","27/32","7/8","29/32","15/16","31/32","1","1-1/32","1-1/16","1-3/32","1-1/8","1-7/32","1-1/4"],"Shank Diameter - Metric (d)":["6","6.53","6.91","8","9.58","10"],"Diameter - Letter Size (D)":["E","F","I","V"],"Diameter-Sizes":"15/64\" - 31.75mm","Flute-Sizes":"66mm - 200mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"112mm - 277mm","Shank-Sizes":"0.234375\" - 1.25\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%201700/Drills_-_Drill_-_V-Series_V-HO-GDR_-_List_1700_-_Catalog"],"Friendly Name":"1700"}
1800

1800

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["10","9","11","8","7","6"],"Shank Diameter - Metric (d)":["2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.3","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.3","11.4","11.5","11.6","11.7","11.8","11.9","12","12.1","12.2","12.3","12.4","12.5","12.6","12.7","12.8","12.9","13"],"Overall Length - Metric (L)":["49","53","57","61","65","70","75","80","86","93","101","109","117","125","133","142","151"],"Diameter - Inch (D)":["0.07874","0.08268","0.08661","0.09055","0.09449","0.09843","0.10236","0.1063","0.11024","0.11417","0.11811","0.12205","0.12598","0.12992","0.13386","0.1378","0.14173","0.14567","0.14961","0.15354","0.15748","0.16142","0.16535","0.16929","0.17323","0.17717","0.1811","0.18504","0.18898","0.19291","0.19685","0.20079","0.20472","0.20866","0.2126","0.21654","0.22047","0.22441","0.22835","0.23228","0.23622","0.24016","0.24409","0.24803","0.25197","0.25591","0.25984","0.26378","0.26772","0.27165","0.27559","0.27953","0.28346","0.2874","0.29134","0.29528","0.29921","0.30315","0.30709","0.31102","0.31496","0.3189","0.32283","0.32677","0.33071","0.33465","0.33858","0.34252","0.34646","0.35039","0.35433","0.35827","0.3622","0.36614","0.37008","0.37402","0.37795","0.38189","0.38583","0.38976","0.3937","0.39764","0.40157","0.40551","0.40945","0.41339","0.41732","0.42126","0.4252","0.42913","0.43307","0.43701","0.44094","0.44488","0.44882","0.45276","0.45669","0.46063","0.46457","0.4685","0.47244","0.47638","0.48031","0.48425","0.48819","0.49213","0.49606","0.5","0.50394","0.50787","0.51181"],"Flute Length - Metric (FL)":["24","27","30","33","36","39","43","47","52","57","63","69","75","81","87","94","101"],"Diameter - Metric (D)":["2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.3","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.3","11.4","11.5","11.6","11.7","11.8","11.9","12","12.1","12.2","12.3","12.4","12.5","12.6","12.7","12.8","12.9","13"],"Helix Angle - Degree":"35","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,45","Cutting Diameter Tolerance Specification":"h8","Web Literature 4":"800387CA","Substrate":"HSSE","Product Overview":"Jobber, HSS-Va, V-coating","Feature 3":"HSS-Va substrate","Cast Iron":"K; Good","Benefit 3":"Added heat resistance via 3% Vanadium content yields superior performance to standard High Speed Steel drills.","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Stainless Steels : 17-4PH":"M; Good","Alloy Steels : 4140; 4340":"P; Good","Coolant Thru":"No","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Benefit 1":"No center drills neeeded. Achieves high accuracy while reducing drill thrust force for longer tool life.","Medium Carbon Steel : 1035; 1045":"P; Good","Feature 2":"OSG V-Coating","Benefit 2":"OSG's very own recipe which features a combination of Titanium Nitride and layered Titanium Carbon Nitride.","Units":["Metric","Inch"],"Feature 1":"Radial Point Thinning","Cutting Direction":"RH","View Catalog Page":"Here","View Speed and Feed Page":"Here","Short Description":"Straight Shank Performance Drills for Ferrous and Non-ferrous Materials","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011"],"Surface Treatment":"V","List Name":"V-SDR","Brand":"V-SERIES","Length of Cut - Specification":"TAPER","Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027"],"Point Thinning":"X Thinning","Full Description":"The V-Select drills are designed for a wide variety of applications, and feature straight shanks matching the diameter of the tool, for customers requiring such features.","Point Angle - Degree (α)":"120","Diameter - Fractional Size (D)":["1/2"],"Diameter-Sizes":"0.07874\" - 13mm","Flute-Sizes":"24mm - 101mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"49mm - 151mm","Shank-Sizes":"2mm - 13mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%201800/Drills_-_Drill_-_V-Series_V-Select_-_List_1800_-_Catalog"],"Friendly Name":"1800"}
1950

1950

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["10","11","9","8","7","6","5"],"Diameter - Inch (D)":["0.0785","0.081","0.082","0.086","0.089","0.0935","0.09375","0.096","0.098","0.0995","0.1015","0.104","0.1065","0.109375","0.11","0.111","0.113","0.116","0.12","0.125","0.1285","0.136","0.140625","0.144","0.147","0.1495","0.152","0.154","0.15625","0.157","0.159","0.161","0.166","0.16929","0.171875","0.173","0.177","0.18","0.182","0.185","0.1875","0.189","0.191","0.19331","0.196","0.199","0.201","0.203125","0.204","0.2055","0.209","0.213","0.21875","0.221","0.228","0.234","0.234375","0.2378","0.242","0.246","0.25","0.257","0.261","0.265625","0.272","0.277","0.28125","0.29","0.295","0.296875","0.302","0.3125","0.316","0.323","0.328125","0.332","0.339","0.34375","0.348","0.358","0.359375","0.36772","0.375","0.377","0.386","0.390625","0.397","0.404","0.40625","0.413","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.53125","0.5625","0.625","0.65625","0.6875"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12","16","20"],"Overall Length - Metric (L)":["56","59","62","65","68","71","75","87","91","96","101","107","113","119","125","131","137","144","151","158","166","169","175","181","184"],"Flute Length - Metric (FL)":["24","27","30","33","36","39","43","47","52","57","63","69","75","81","87","94","101","106","109","115","118"],"Diameter - Metric (D)":["1.994","2.057","2.083","2.184","2.261","2.375","2.381","2.438","2.489","2.527","2.578","2.642","2.705","2.778","2.794","2.819","2.87","2.946","3.048","3.175","3.264","3.454","3.572","3.658","3.734","3.797","3.861","3.912","3.969","3.988","4.039","4.089","4.216","4.3","4.366","4.394","4.496","4.572","4.623","4.699","4.763","4.801","4.851","4.91","4.978","5.055","5.105","5.159","5.182","5.22","5.309","5.41","5.556","5.613","5.791","5.944","5.953","6.04","6.147","6.248","6.35","6.528","6.629","6.747","6.909","7.036","7.144","7.366","7.493","7.541","7.671","7.938","8.026","8.204","8.334","8.433","8.611","8.731","8.839","9.093","9.128","9.34","9.525","9.576","9.804","9.922","10.084","10.262","10.319","10.49","10.716","11.113","11.509","11.906","12.303","12.7","13.494","14.288","15.875","16.669","17.463"],"Helix Angle - Degree":"30","Diameter - Wire Gage (D)":["47","46","45","44","43","42","41","40","39","38","37","36","35","34","33","32","31","30","29","27","26","25","24","23","22","21","20","19","17","16","15","14","13","12","11","9","8","7","6","5","4","3","2","1"],"Hardened Steels : 45-50 HRC":"H; Good","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,38","Cutting Diameter Tolerance Specification":"h8","Benefit 3":"Harder than T15 CPM, this substrate yields maximum hardness for maximum wear resistance.","Web Literature 4":"800387CA","Product Overview":"Jobber, XPM, V-coating","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Best","High Carbon Steel : 1065":"P; Best","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Units":["Inch","Metric"],"Stainless Steels : 17-4PH":"M; Good","Coolant Thru":"No","Low Carbon Steel : 1010; 1018":"P; Good","Benefit 1":"No center drills neeeded. Achieves high accuracy while reducing drill thrust force for longer tool life.","Stainless Steels : 400":"M; Good","Feature 2":"OSG V-Coating","Benefit 2":"OSG's very own recipe which features a combination of Titanium Nitride and layered Titanium Carbon Nitride.","Short Description":"Powdered Metal Drills Designed for Difficult to Machine Materials","Feature 1":"Radial Point Thinning","Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011"],"Surface Treatment":"V","List Name":"VPH-GDR","Brand":"V-SERIES","Nickel Alloy : Inconel":"S; Best","Length of Cut - Specification":["TAPER","JOBBER"],"Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027"],"Point Thinning":["X Thinning","R Thinning"],"Titanium : 6AL4V (30HRC)":"S; Good","Substrate":"XPM","Feature 3":"XPM Powdered Metal Substrate","Full Description":"The VPH V-Series drill line is the ideal drilling solution when dealing with exotic materials like Inconel, and when through-tool coolant is not available. OSG's proprietary XPM powedered metal substrate combined with our very own V-coating produces the hardest and most wear resistant drill possible when compared to all other HSS drills.","Point Angle - Degree (α)":["130","120"],"Diameter - Fractional Size (D)":["3/32","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","17/32","9/16","5/8","21/32","11/16"],"Diameter - Letter Size (D)":["A","C","D","E","F","G","I","J","L","M","N","O","P","Q","R","S","T","V","W","X","Y","Z"],"Diameter-Sizes":"0.0785\" - 17.463mm","Flute-Sizes":"24mm - 118mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"56mm - 184mm","Shank-Sizes":"3mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%201950/Drills_-_Drill_-_V-Series_VPH_GDR_-_List_1950_-_Catalog"],"Friendly Name":"1950"}
200

200

{"Number of Flutes":"2","Shank Diameter - Metric (d)":["1.18","1.3208","1.397","1.50114","1.5113","1.6129","1.7018","1.778","1.8542","1.9304","1.9939","1.99898","2.0574","2.0828","2.1844","2.2606","2.3749","2.4384","2.4892","2.49936","2.5273","2.5781","2.6416","2.7051","2.794","2.8194","2.8702","2.9464","2.99974","3.048","3.2639","3.4544","3.50012","3.5687","3.6576","3.7338","3.7973","3.8608","3.9116","3.9878","4.0005","4.0386","4.0894","4.2164","4.3053","4.3942","4.4958","4.572","4.6228","4.699","4.8006","4.8514","4.9149","4.9784","5.00126","5.0546","5.1054","5.1816","5.2197","5.3086","5.4102","5.4991","5.6134","5.7912","5.9436","5.99948","6.0452","6.1468","6.2484","6.49986","6.5278","6.6294","6.7564","6.9088","7.00024","7.0358","7.14","7.366","7.493","7.50062","7.6708","7.9375","8.001","8.0264","8.2042","8.4328","8.49884","8.6106","8.8392","8.99922","9.0932","9.12876","9.3472","9.4996","9.525","9.5758","9.8044","9.92124","9.99998","10.0838","10.2616","10.3175","10.4902","10.5004","10.7163","11.0007","11.1125","11.5011","11.5087","11.9075","11.999","12.3038"],"Overall Length - Metric (L)":["38.1","41.275","42.8625","44.45","46.0248","47.625","49.2252","52.4002","53.975","55.5752","57.15","60.325","61.9252","63.5","66.675","68.2752","69.85","71.4502","74.6252","76.2","77.8002","79.375","82.55","84.1502","85.725","87.3252","90.5002","92.075","93.6752","95.25"],"Drilling L/D Ratio (xD)":["9","8","7","6","5","4","3","2"],"Diameter - Inch (D)":["0.0465","0.046875","0.052","0.055","0.05906","0.0595","0.0625","0.0635","0.067","0.07","0.073","0.076","0.078125","0.0785","0.07874","0.081","0.082","0.086","0.089","0.0935","0.09375","0.096","0.098","0.09843","0.0995","0.1015","0.104","0.1065","0.109375","0.11","0.111","0.113","0.116","0.11811","0.12","0.125","0.1285","0.136","0.1378","0.1405","0.140625","0.144","0.147","0.1495","0.152","0.154","0.15625","0.157","0.15748","0.159","0.161","0.166","0.1695","0.171875","0.173","0.177","1.772","0.18","0.182","0.185","0.1875","0.189","0.191","0.1935","0.196","0.19685","0.199","0.201","0.203125","0.204","0.2055","0.209","0.213","0.21654","0.21875","0.221","0.228","0.234","0.234375","0.23622","0.238","0.242","0.246","0.25","0.25591","0.257","0.261","0.265625","0.266","0.272","0.27559","0.277","0.281","0.28125","0.29","0.295","0.29528","0.296875","0.302","0.3125","0.31496","0.316","0.323","0.328125","0.332","0.33465","0.339","0.34375","0.348","0.35433","0.358","0.359375","0.368","0.37402","0.375","0.377","0.386","0.390625","0.3937","0.397","0.404","0.40625","0.413","0.41339","0.421875","0.43307","0.4375","0.45276","0.453125","0.46875","0.47244","0.484375","0.5"],"Flute Length - Metric (FL)":["12.7","15.875","17.4625","19.05","20.6248","22.225","23.8125","25.4","27.0002","28.575","30.1752","31.75","33.3502","34.925","36.5252","38.1","39.7002","41.275","42.799","44.45","46.0502","47.625","49.2252","50.8","52.4002","53.975","55.5752","57.15"],"Diameter - Metric (D)":["1.181","1.191","1.321","1.397","1.5","1.511","1.588","1.613","1.702","1.778","1.854","1.93","1.984","1.994","2","2.057","2.083","2.184","2.261","2.375","2.381","2.438","2.489","2.5","2.527","2.578","2.642","2.705","2.778","2.794","2.819","2.87","2.946","3","3.048","3.175","3.264","3.454","3.5","3.569","3.572","3.658","3.734","3.797","3.861","3.912","3.969","3.988","4","4.039","4.089","4.216","4.305","4.366","4.394","4.496","4.5","4.572","4.623","4.699","4.763","4.801","4.851","4.915","4.978","5","5.055","5.105","5.159","5.182","5.22","5.309","5.41","5.5","5.556","5.613","5.791","5.944","5.953","6","6.045","6.147","6.248","6.35","6.5","6.528","6.629","6.747","6.756","6.909","7","7.036","7.137","7.144","7.366","7.493","7.5","7.541","7.671","7.938","8","8.026","8.204","8.334","8.433","8.5","8.611","8.731","8.839","9","9.093","9.128","9.347","9.5","9.525","9.576","9.804","9.922","10","10.084","10.262","10.319","10.49","10.5","10.716","11","11.113","11.5","11.509","11.906","12","12.303","12.7"],"Surface Treatment":"BRIGHT","Benefit 2":"Bright, TiN, TiCN and TiAlN available","Substrate":"Carbide","Diameter - Wire Gage (D)":["56","55","54","53","52","51","50","49","48","47","46","45","44","43","42","41","40","39","38","37","36","35","34","33","32","31","30","29","28","27","26","25","24","23","22","21","20","19","18","17","16","15","14","13","12","11","10","9","8","7","6","5","4","3","2","1"],"Web Literature 1":["8002024CA-DR,186|8002024CA-DRT,34","8002024CA-DR,154|8002024CA-DRT,34","8002024CA-DR,185|8002024CA-DRT,34","8002024CA-DR,184|8002024CA-DRT,34","8002024CA-DR,198|8002024CA-DRT,34","8002024CA-DR,155|8002024CA-DRT,34","8002024CA-DR,191|8002024CA-DRT,34","8002024CA-DR,192|8002024CA-DRT,34","8002024CA-DR,156|8002024CA-DRT,34"],"Web Literature 4":"800387CA","Point Thinning":"Four Facet Point","Cast Iron":"K; Good","Units":["Inch","Metric"],"Coolant Thru":"No","Low Carbon Steel : 1010; 1018":"P; Good","Brand":"OSG","Feature 3":"OSG Quality Certified","Benefit 3":"Performance and quality are the same every time, tool after tool.","Notes":"Other coatings are available upon request.","Feature 1":"Micrograin Carbide","Cutting Direction":"RH","Feature 2":"Multiple Coatings","View Catalog Page":"Here","View Speed and Feed Page":"Here","Short Description":"Standard Carbide Drill for General Machining Applications","List Name":"STRAIGHT DRILL","Product Overview":"Straight Flute, Jobber","Cutting Diameter Tolerance - Inch":"+0 / -0.0005","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Length of Cut - Specification":["TAPER","JOBBER","STUB"],"Cutting Diameter Tolerance - Metric":"+0 / -0.013","Full Description":"The Standard Carbide drill lineup consists of a variety of different drill designs, made to OSG quality standards at a value-added price point that is friendly to any tooling budget. An economical solution without sacrificing consistent tolerancing and precision.","Helix Angle - Degree":"0","Point Angle - Degree (α)":"140","Shank Diameter - Inch (d)":["0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.65625","0.34375","0.5"],"Diameter - Fractional Size (D)":["3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2"],"Diameter - Letter Size (D)":["A","B","C","D","E","F","G","H","I","J","K","L","M","N","O","P","Q","R","S","T","U","V","W","X","Y","Z"],"Diameter-Sizes":"0.0465\" - 1.772\"","Flute-Sizes":"12.7mm - 57.15mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38.1mm - 95.25mm","Shank-Sizes":"1.18mm - 0.65625\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20200/Drills_-_Drill_-_CARBIDE_STRAIGHT_-_List_200_-_Catalog"],"Friendly Name":"200"}
2000

2000

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["10","9","11","8","7","6","5","4","3"],"Shank Diameter - Metric (d)":["3","4","6","8","10","12","16","20","25","32"],"Diameter - Inch (D)":["0.07874","0.08268","0.08661","0.09055","0.09449","0.09843","0.10236","0.1063","0.11024","0.11417","0.11811","0.12205","0.12598","0.12992","0.13386","0.1378","0.14173","0.14567","0.14961","0.15354","0.15748","0.16142","0.16535","0.16929","0.17323","0.17717","0.1811","0.18504","0.18898","0.19291","0.19685","0.20079","0.20472","0.20866","0.2126","0.21654","0.22047","0.22441","0.22835","0.23228","0.23622","0.24016","0.24409","0.24803","0.25197","0.25591","0.25984","0.26378","0.26772","0.27165","0.27559","0.27953","0.28346","0.2874","0.29134","0.29528","0.29921","0.30315","0.30709","0.31102","0.31496","0.3189","0.32283","0.32677","0.33071","0.33465","0.33858","0.34252","0.34646","0.35039","0.35433","0.35827","0.3622","0.36614","0.37008","0.37402","0.37795","0.38189","0.38583","0.38976","0.3937","0.39764","0.40157","0.40551","0.40945","0.41339","0.41732","0.42126","0.4252","0.42913","0.43307","0.43701","0.44094","0.44488","0.44882","0.45276","0.45669","0.46063","0.46457","0.4685","0.47244","0.47638","0.48031","0.48425","0.48819","0.49213","0.49606","0.5","0.50394","0.50787","0.51181","0.5315","0.55118","0.57087","0.59055","0.61024","0.62992","0.64961","0.66929","0.68898","0.70866","0.72835","0.74803","0.76772","0.7874","0.80709","0.82677","0.84646","0.86614","0.88583","0.90551","0.9252","0.94488","0.96457","0.98425","1.00394","1.02362","1.04331","1.06299","1.10236","1.14173","1.1811","1.22047","1.25984"],"Overall Length - Metric (L)":["56","59","62","65","68","71","75","87","91","96","101","107","113","119","125","131","137","144","151","158","166","169","172","181","184","188","191","204","208","212","216","225","230","235","240"],"Flute Length - Metric (FL)":["24","27","30","33","36","39","43","47","52","57","63","69","75","81","87","94","101","106","109","112","115","118","122","125","128","132","136","140","145","150","155","160","165"],"Diameter - Metric (D)":["2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.3","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.3","11.4","11.5","11.6","11.7","11.8","11.9","12","12.1","12.2","12.3","12.4","12.5","12.6","12.7","12.8","12.9","13","13.5","14","14.5","15","15.5","16","16.5","17","17.5","18","18.5","19","19.5","20","20.5","21","21.5","22","22.5","23","23.5","24","24.5","25","25.5","26","26.5","27","28","29","30","31","32"],"Helix Angle - Degree":"40","Web Literature 1":["8002024CA-DR,179|8002024CA-DRT,40","8002024CA-DR,283|8002024CA-DRT,40","8002024CA-DR,199|8002024CA-DRT,40","8002024CA-DR,186|8002024CA-DRT,40","8002024CA-DR,220|8002024CA-DRT,40","8002024CA-DR,221|8002024CA-DRT,40","8002024CA-DR,183|8002024CA-DRT,40","8002024CA-DR,175|8002024CA-DRT,40","8002024CA-DR,176|8002024CA-DRT,40","8002024CA-DR,180|8002024CA-DRT,40","8002024CA-DR,225|8002024CA-DRT,40","8002024CA-DR,184|8002024CA-DRT,40"],"Cutting Diameter Tolerance Specification":"h8","Web Literature 4":"800387CA","Product Overview":"Jobber, XPM, V-coating","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","Hardened Steels : 35-45 HRC":"H; Good","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Short Description":"Parabolic Drill Designed for Ferrous and Non-ferrous Materials","Units":["Metric","Inch"],"Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","Cutting Direction":"RH","High Carbon Steel : 1065":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011","+0 / -0.0013","+0 / -0.0015"],"Surface Treatment":"V","Full Description":"VP® GDR Drills Parabolic Drill Designed for Ferrous and Non-ferrous Materials","List Name":"VP-GDR","Brand":"V-SERIES","Length of Cut - Specification":["TAPER","JOBBER","STUB"],"Nickel Alloy : Inconel":"S; Good","Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027","+0 / -0.033","+0 / -0.039"],"Point Thinning":["X Thinning","R Thinning"],"Substrate":"XPM","Point Angle - Degree (α)":"120","Diameter - Fractional Size (D)":["1/2"],"Diameter-Sizes":"0.07874\" - 32mm","Flute-Sizes":"24mm - 165mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"56mm - 240mm","Shank-Sizes":"3mm - 32mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%202000/Drills_-_Drill_-_V-Series_VP_GDR_-_List_2000_-_Catalog"],"Friendly Name":"2000"}
215

215

{"Number of Flutes":"2","Shank Diameter - Metric (d)":["1.00076","1.09982","1.1811","1.19888","1.30048","1.3208","1.397","1.50114","1.5113","1.6002","1.6129","1.69926","1.778","1.80086","1.8542","1.89992","1.9304","1.9939","1.99898","2.0574","2.0828","2.10058","2.1844","2.19964","2.2606","2.30124","2.3749","2.4003","2.4384","2.4892","2.49936","2.5273","2.5781","2.60096","2.6416","2.70002","2.7051","2.794","2.79908","2.8194","2.8702","2.90068","2.9464","2.99974","3.048","3.0988","3.2004","3.2639","3.29946","3.40106","3.4544","3.50012","3.5687","3.59918","3.6576","3.70078","3.7338","3.7973","3.8608","3.8989","3.9116","3.9878","4.0005","4.0386","4.0894","4.09956","4.20116","4.2164","4.30022","4.3053","4.3942","4.39928","4.4958","4.572","4.59994","4.6228","4.699","4.8006","4.8514","4.89966","4.9149","4.9784","5.00126","5.0546","5.10032","5.1054","5.1816","5.19938","5.2197","5.30098","5.3086","5.40004","5.4102","5.4991","5.6007","5.6134","5.69976","5.7912","5.79882","5.90042","5.9436","5.99948","6.0452","6.10108","6.1468","6.20014","6.2484","6.2992","6.4008","6.49986","6.5278","6.59892","6.6294","6.70052","6.7564","6.79958","6.90118","6.9088","7.00024","7.0358","7.0993","7.1374","7.2009","7.29996","7.366","7.39902","7.493","7.50062","7.59968","7.6708","7.69874","7.80034","7.8994","8.001","8.0264","8.10006","8.19912","8.30072","8.39978","8.4328","8.49884","8.60044","8.6106","8.6995","8.8011","8.8392","8.90016","8.99922","9.0932","9.10082","9.19988","9.29894","9.3472","9.40054","9.4996","9.5758","9.6012","9.70026","9.79932","9.90092","9.99998","10.0838","10.099","10.2006","10.2616","10.2997","10.3988","10.4902","10.5004","10.5994","10.701","10.8001","10.8991","11.0007","11.0998","11.1989","11.3005","11.3995","11.5011","11.6002","11.6992","11.8008","11.8999","11.999"],"Overall Length - Metric (L)":["38.1","41.275","42.8625","42.6875","43.0022","44.45","46.0375","47.625","49.2125","52.3875","53.975","55.5625","57.15","60.325","61.9125","63.5","66.675","68.2625","67.9958","69.85","71.4375","74.6125","76.2","77.7875","79.375","78.994","82.55","83.0072","84.1375","85.725","86.0044","87.3125","90.4875","89.9922","92.075","93.0148","93.6625","95.25"],"Drilling L/D Ratio (xD)":["9","10","8","7","6","5","4","3"],"Diameter - Inch (D)":["0.03937","0.04331","0.0465","0.046875","0.04724","0.05118","0.052","0.055","0.05512","0.05906","0.0595","0.0625","0.06299","0.0635","0.06693","0.067","0.07","0.07087","0.073","0.0748","0.076","0.078125","0.0785","0.07874","0.081","0.082","0.08268","0.086","0.08661","0.089","0.09055","0.0935","0.09375","0.09449","0.096","0.098","0.09843","0.0995","0.1015","0.10236","0.104","0.1063","0.1065","0.109375","0.11","0.11024","0.111","0.113","0.11417","0.116","0.11811","0.12","0.12205","0.125","0.12598","0.1285","0.12992","0.13386","0.136","0.1378","0.1405","0.140625","0.14173","0.144","0.14567","0.147","0.1495","0.14961","0.152","0.15354","0.154","0.15625","0.157","0.15748","0.159","0.161","0.16142","0.16535","0.166","0.16929","0.1695","0.171875","0.173","0.17323","0.177","0.1772","0.18","0.1811","0.182","0.185","0.1875","0.189","0.191","0.19291","0.1935","0.196","0.19685","0.199","0.20079","0.201","0.203125","0.204","0.20472","0.2055","0.20866","0.209","0.2126","0.213","0.21654","0.21875","0.22047","0.221","0.22441","0.228","0.22835","0.23228","0.234","0.234375","0.23622","0.238","0.24016","0.242","0.24409","0.246","0.24803","0.25","0.25197","0.25591","0.257","0.25984","0.261","0.26378","0.265625","0.266","0.26772","0.27165","0.272","0.27559","0.277","0.27953","0.281","0.28125","0.28346","0.2874","0.29","0.29134","0.295","0.29528","0.296875","0.29921","0.302","0.30315","0.30709","0.31102","0.3125","0.31496","0.316","0.3189","0.32283","0.323","0.32677","0.328125","0.33071","0.332","0.33465","0.33858","0.339","0.34252","0.34375","0.34646","0.348","0.35039","0.35433","0.358","0.35827","0.359375","0.3622","0.36614","0.368","0.37008","0.37402","0.375","0.377","0.37795","0.38189","0.38583","0.386","0.38976","0.390625","0.3937","0.397","0.39764","0.40157","0.404","0.40551","0.40625","0.40945","0.413","0.41339","0.41732","0.42126","0.421875","0.4252","0.42913","0.43307","0.43701","0.4375","0.44094","0.44488","0.44882","0.45276","0.453125","0.45669","0.46063","0.46457","0.4685","0.46875","0.47244","0.484375","0.5"],"Flute Length - Metric (FL)":["11.1125","12.7","15.875","17.4625","18.0086","19.05","20.6375","22.225","23.8125","25.4","26.9875","28.575","30.1625","31.75","33.3375","34.925","36.5125","38.1","39.6875","41.275","42.8625","44.45","46.0375","45.9994","47.625","48.006","49.2125","50.8","52.3875","53.975","54.0004","55.5625","57.15"],"Diameter - Metric (D)":["1","1.1","1.181","1.191","1.2","1.3","1.321","1.397","1.4","1.5","1.511","1.588","1.6","1.613","1.7","1.702","1.778","1.8","1.854","1.9","1.93","1.984","1.994","2","2.057","2.083","2.1","2.184","2.2","2.261","2.3","2.375","2.381","2.4","2.438","2.489","2.5","2.527","2.578","2.6","2.642","2.7","2.705","2.778","2.794","2.8","2.819","2.87","2.9","2.946","3","3.048","3.1","3.175","3.2","3.264","3.3","3.4","3.454","3.5","3.569","3.572","3.6","3.658","3.7","3.734","3.797","3.8","3.861","3.9","3.912","3.969","3.988","4","4.039","4.089","4.1","4.2","4.216","4.3","4.305","4.366","4.394","4.4","4.496","4.501","4.572","4.6","4.623","4.699","4.763","4.801","4.851","4.9","4.915","4.978","5","5.055","5.1","5.105","5.159","5.182","5.2","5.22","5.3","5.309","5.4","5.41","5.5","5.556","5.6","5.613","5.7","5.791","5.8","5.9","5.944","5.953","6","6.045","6.1","6.147","6.2","6.248","6.3","6.35","6.4","6.5","6.528","6.6","6.629","6.7","6.747","6.756","6.8","6.9","6.909","7","7.036","7.1","7.137","7.144","7.2","7.3","7.366","7.4","7.493","7.5","7.541","7.6","7.671","7.7","7.8","7.9","7.938","8","8.026","8.1","8.2","8.204","8.3","8.334","8.4","8.433","8.5","8.6","8.611","8.7","8.731","8.8","8.839","8.9","9","9.093","9.1","9.128","9.2","9.3","9.347","9.4","9.5","9.525","9.576","9.6","9.7","9.8","9.804","9.9","9.922","10","10.084","10.1","10.2","10.262","10.3","10.319","10.4","10.49","10.5","10.6","10.7","10.716","10.8","10.9","11","11.1","11.113","11.2","11.3","11.4","11.5","11.509","11.6","11.7","11.8","11.9","11.906","12","12.303","12.7"],"Surface Treatment":"BRIGHT","Benefit 2":"Bright, TiN, TiCN and TiAlN available","Substrate":"Carbide","Web Literature 1":["8002024CA-DR,145|8002024CA-DRT,34","8002024CA-DR,146|8002024CA-DRT,34","8002024CA-DR,156|8002024CA-DRT,34","8002024CA-DR,198|8002024CA-DRT,34","8002024CA-DR,149|8002024CA-DRT,34"],"Web Literature 4":"800387CA","Point Thinning":"Four Facet Point","Hardened Steels : 35 HRC":"H; Good","Cast Iron":"K; Good","Hardened Steels : 35-45 HRC":"H; Good","Aluminum : Casting":"N; Good","Stainless Steels : 17-4PH":"M; Good","Coolant Thru":"No","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Stainless Steels : 400":"M; Good","Brand":"OSG","Feature 3":"OSG Quality Certified","Benefit 3":"Performance and quality are the same every time, tool after tool.","Notes":"Other coatings are available upon request.","Units":["Metric","Inch"],"Feature 1":"Micrograin Carbide","Cutting Direction":"RH","Feature 2":"Multiple Coatings","View Catalog Page":"Here","View Speed and Feed Page":"Here","Helix Direction":"RH","Short Description":"Standard Carbide Drill for General Machining Applications","Cutting Diameter Tolerance - Inch":"+0 / -0.0005","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Length of Cut - Specification":["TAPER","JOBBER","STUB"],"Nickel Alloy : Inconel":"S; Good","Cutting Diameter Tolerance - Metric":"+0 / -0.013","Titanium : 6AL4V (30HRC)":"S; Good","Full Description":"The Standard Carbide drill lineup consists of a variety of different drill designs, made to OSG quality standards at a value-added price point that is friendly to any tooling budget. An economical solution without sacrificing consistent tolerancing and precision.","List Name":"SLOW SPIRAL DRILL","Product Overview":"Slow Spiral, Jobber","Point Angle - Degree (α)":"135","Helix Angle - Degree":"15","Diameter - Wire Gage (D)":["56","55","54","53","52","51","50","49","48","47","46","45","44","43","42","41","40","39","38","37","36","35","34","33","32","31","30","29","28","27","26","25","24","23","22","21","20","19","18","17","16","15","14","13","12","11","10","9","8","7","6","5","4","3","2","1"],"Shank Diameter - Inch (d)":["0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.65625","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5"],"Diameter - Fractional Size (D)":["3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2"],"Diameter - Letter Size (D)":["A","B","C","D","E","F","G","H","I","J","K","L","M","N","O","P","Q","R","S","T","U","V","W","X","Y","Z"],"Countersink Included Angle - Degree":"-","Cutting Diameter Tolerance Specification":"-","Flute Length - Inch (FL)":"-","Min Drill Hole Size - Metric":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":"-","Overall Length - Inch (L)":"-","Pilot Diameter - Inch (Da)":"-","Pilot Diameter - Metric (Da)":"-","Shank Tolerance":"-","Step Diameter - Inch (D1)":"-","Step Diameter - Metric (D1)":"-","Tap Type - Spiral Flute (ANSI)":"-","Tap Type - Spiral Flute (Metric)":"-","Tap Type - Spiral Point (ANSI)":"-","Tap Type - Spiral Point (Metric)":"-","Tap Type - Straight Flute (ANSI)":"-","Tap Type - Straight Flute (Metric)":"-","Taper Length - Inch (I)":"-","Taper Length - Metric (I)":"-","Type":"-","Diameter-Sizes":"0.03937\" - 12.7mm","Flute-Sizes":"11.1125mm - 57.15mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38.1mm - 95.25mm","Shank-Sizes":"1.00076mm - 0.65625\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20215/Drills_-_Drill_-_CARBIDE_SLOW_SPIRAL_-_List_215_-_Catalog"],"Friendly Name":"215"}
220D

220D

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["14","12","11","10","9","8","7","6","5","4"],"Shank Diameter - Metric (d)":["1.1811","1.3208","1.397","1.50114","1.5113","1.6129","1.7018","1.778","1.8542","1.9304","1.9939","1.99898","2.0574","2.0828","2.1844","2.2606","2.3749","2.4384","2.4892","2.49936","2.5273","2.5781","2.6416","2.7051","2.794","2.8194","2.8702","2.9464","2.99974","3.048","3.2639","3.4544","3.50012","3.5687","3.6576","3.7338","3.7973","3.8608","3.9116","3.9878","4.0005","4.0386","4.0894","4.2164","4.3053","4.3942","4.4958","4.572","4.6228","4.699","4.8006","4.8514","4.9149","4.9784","5.00126","5.0546","5.1054","5.1816","5.2197","5.3086","5.4102","5.4991","5.6134","5.7912","5.9436","5.99948","6.0452","6.1468","6.2484","6.49986","6.5278","6.6294","6.7564","6.9088","7.00024","7.0358","7.1374","7.366","7.493","7.50062","7.6708","7.9375","8.001","8.0264","8.2042","8.4328","8.49884","8.6106","8.8392","8.99922","9.0932","9.3472","9.4996","9.525","9.5758","9.8044","9.99998","10.0838","10.2616","10.4902","10.5004","11.0007","11.5011","11.999"],"Overall Length - Metric (L)":["38.1","44.45","50.8","57.15","63.5","69.85","76.2","82.55","88.9","95.25","101.6","107.95","114.3","120.65"],"Diameter - Inch (D)":["0.0465","0.046875","0.052","0.055","0.05906","0.0595","0.0625","0.0635","0.067","0.07","0.073","0.076","0.078125","0.0785","0.07874","0.081","0.082","0.086","0.089","0.0935","0.09375","0.096","0.098","0.09843","0.0995","0.1015","0.104","0.1065","0.109375","0.11","0.111","0.113","0.116","0.11811","0.12","0.125","0.1285","0.136","0.1378","0.1405","0.140625","0.144","0.147","0.1495","0.152","0.154","0.15625","0.157","0.15748","0.159","0.161","0.166","0.1695","0.171875","0.173","0.177","0.1772","0.18","0.182","0.185","0.1875","0.189","0.191","0.1935","0.196","0.19685","0.199","0.201","0.203125","0.204","0.2055","0.209","0.213","0.21654","0.21875","0.221","0.228","0.234","0.234375","0.23622","0.238","0.242","0.246","0.25","0.25591","0.257","0.261","0.265625","0.266","0.272","0.27559","0.277","0.281","0.28125","0.29","0.295","0.29528","0.296875","0.302","0.3125","0.31496","0.316","0.323","0.328125","0.332","0.33465","0.339","0.34375","0.348","0.35433","0.358","0.359375","0.368","0.37402","0.375","0.377","0.386","0.390625","0.3937","0.397","0.404","0.40625","0.413","0.41339","0.421875","0.43307","0.4375","0.45276","0.453125","0.46875","0.47244","0.484375","0.5"],"Flute Length - Metric (FL)":["19.05","22.225","25.4","31.75","34.925","41.275","44.45","50.8","53.975","60.325","63.5","69.85","73.025","76.2"],"Diameter - Metric (D)":["1.181","1.191","1.321","1.397","1.5","1.511","1.588","1.613","1.702","1.778","1.854","1.93","1.984","1.994","2","2.057","2.083","2.184","2.261","2.375","2.291","2.438","2.489","2.5","2.527","2.578","2.642","2.705","2.778","2.794","2.819","2.87","2.946","3","3.048","3.175","3.264","3.454","3.5","3.569","3.572","3.658","3.734","3.797","3.861","3.912","3.969","3.988","4","4.039","4.089","4.216","4.305","4.366","4.394","4.496","4.5","4.572","4.623","4.699","4.763","4.801","4.851","4.915","4.978","5","5.055","5.105","5.159","5.182","5.22","5.309","5.41","5.5","5.556","5.613","5.791","5.944","5.953","6","6.045","6.147","6.248","6.35","6.5","6.528","6.629","6.747","6.756","6.909","7","7.036","7.137","7.144","7.366","7.493","7.5","7.541","7.671","7.938","8","8.026","8.204","8.334","8.433","8.5","8.611","8.731","8.839","9","9.093","9.128","9.347","9.5","9.525","9.576","9.804","9.922","10","10.084","10.262","10.319","10.49","10.5","10.716","11","11.113","11.5","11.509","11.906","12","12.303","12.7"],"Surface Treatment":"BRIGHT","Benefit 2":"Bright, TiN, TiCN and TiAlN available","Substrate":"Carbide","Diameter - Wire Gage (D)":["56","55","54","53","52","51","50","49","48","47","46","45","44","43","42","41","40","39","38","37","36","35","34","33","32","31","30","29","28","27","26","25","24","23","22","21","20","19","18","17","16","15","14","13","12","11","10","9","8","7","6","5","4","3","2","1"],"Web Literature 1":["8002024CA-DR,150|8002024CA-DRT,34","8002024CA-DR,198|8002024CA-DRT,34","8002024CA-DR,156|8002024CA-DRT,34","8002024CA-DR,185|8002024CA-DRT,34"],"Web Literature 4":"800387CA","Length of Cut - Specification":["EXTRA LONG","TAPER","JOBBER","STUB"],"Point Thinning":"Four Facet Point","Hardened Steels : 35 HRC":"H; Good","Cast Iron":"K; Good","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Units":["Inch","Metric"],"Stainless Steels : 17-4PH":"M; Good","Coolant Thru":"No","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Stainless Steels : 400":"M; Good","Brand":"OSG","Feature 3":"OSG Quality Certified","Benefit 3":"Performance and quality are the same every time, tool after tool.","Notes":"Other coatings are available upon request.","Feature 1":"Micrograin Carbide","Cutting Direction":"RH","Feature 2":"Multiple Coatings","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Short Description":"Standard Carbide Drill for General Machining Applications","Cutting Diameter Tolerance - Inch":"+0 / -0.0005","List Name":"TWIST DRILL","Product Overview":"Twist, Jobber","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Cutting Diameter Tolerance - Metric":"+0 / -0.013","Full Description":"The Standard Carbide drill lineup consists of a variety of different drill designs, made to OSG quality standards at a value-added price point that is friendly to any tooling budget. An economical solution without sacrificing consistent tolerancing and precision.","Point Angle - Degree (α)":"118","Helix Angle - Degree":"20","Shank Diameter - Inch (d)":["0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.65625","0.34375","0.359375","0.390625","0.40625","0.4375","0.453125","0.46875","0.484375"],"Diameter - Fractional Size (D)":["3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2"],"Countersink Included Angle - Degree":"-","Cutting Diameter Tolerance Specification":"-","Diameter - Letter Size (D)":["A","B","C","D","E","F","G","H","I","J","K","L","M","N","O","P","Q","R","S","T","U","V","W","X","Y","Z"],"Flute Length - Inch (FL)":"-","Min Drill Hole Size - Metric":"-","Neck Length - Inch (L1)":"-","Neck Length - Metric (L1)":"-","Overall Length - Inch (L)":"-","Pilot Diameter - Inch (Da)":"-","Pilot Diameter - Metric (Da)":"-","Shank Tolerance":"-","Step Diameter - Inch (D1)":"-","Step Diameter - Metric (D1)":"-","Tap Type - Spiral Flute (ANSI)":"-","Tap Type - Spiral Flute (Metric)":"-","Tap Type - Spiral Point (ANSI)":"-","Tap Type - Spiral Point (Metric)":"-","Tap Type - Straight Flute (ANSI)":"-","Tap Type - Straight Flute (Metric)":"-","Taper Length - Inch (I)":"-","Taper Length - Metric (I)":"-","Type":"-","Diameter-Sizes":"0.0465\" - 12.7mm","Flute-Sizes":"19.05mm - 76.2mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38.1mm - 120.65mm","Shank-Sizes":"1.1811mm - 0.65625\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20220D/Drills_-_Drill_-_CARBIDE_TWIST_-_List_220D_-_Catalog"],"Friendly Name":"220D"}
233

233

{"Diameter - Metric (D)":["3","3.175","3.571875","3.969","4.366","4.763","5.159","5.556","5.953","6","6.35","6.747","7.144","7.541","7.938","8","8.334","8.733","9.128","9.525","9.922","10","10.319","10.716","11.113","11.509","11.906","12","12.303","12.7","13.494","14","14.288","15.875","16","19.05"],"Number of Flutes":"3","Drilling L/D Ratio (xD)":["9","8","7","6","5","4"],"Shank Diameter - Metric (d)":["3","6","8","10","12","14","16"],"Diameter - Inch (D)":["0.11811","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.23622","0.25","0.265625","0.28125","0.296875","0.3125","0.31496","0.328125","0.34375","0.359375","0.375","0.390625","0.3937","0.40625","0.421875","0.4375","0.453125","0.46875","0.47244","0.484375","0.5","0.53125","0.55118","0.5625","0.625","0.62992","0.75"],"Overall Length - Metric (L)":["57.15","63.5","69.85","76.2","82.55","88.9","95.25","101.6","107.95","114.3","120.65","146.05"],"Flute Length - Metric (FL)":["31.75","34.925","41.275","44.45","50.8","53.975","60.325","63.5","69.85","73.025","76.2","88.9","107.95"],"Helix Angle - Degree":"30","Surface Treatment":"BRIGHT","Benefit 2":"Bright, TiN, TiCN and TiAlN available","Substrate":"Carbide","Web Literature 1":["8002024CA-DR,156|8002024CA-DRT,34","8002024CA-DR,198|8002024CA-DRT,34","8002024CA-DR,184|8002024CA-DRT,34","8002024CA-DR,186|8002024CA-DRT,34","8002024CA-DR,185|8002024CA-DRT,34"],"Web Literature 4":"800387CA","Cast Iron":"K; Good","Coolant Thru":"No","Low Carbon Steel : 1010; 1018":"P; Good","Brand":"OSG","Feature 3":"OSG Quality Certified","Benefit 3":"Performance and quality are the same every time, tool after tool.","Notes":"Other coatings are available upon request.","Units":["Metric","Inch"],"Feature 1":"Micrograin Carbide","Cutting Direction":"RH","Feature 2":"Multiple Coatings","View Catalog Page":"Here","View Speed and Feed Page":"Here","Helix Direction":"RH","Short Description":"Standard Carbide Drill for General Machining Applications","Cutting Diameter Tolerance - Inch":"+0 / -0.0005","Product Overview":"Twist, Jobber","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Length of Cut - Specification":["TAPER","JOBBER","STUB"],"Cutting Diameter Tolerance - Metric":"+0 / -0.013","Full Description":"The Standard Carbide drill lineup consists of a variety of different drill designs, made to OSG quality standards at a value-added price point that is friendly to any tooling budget. An economical solution without sacrificing consistent tolerancing and precision.","List Name":"THREE FLUTE DRILL","Point Angle - Degree (α)":"150","Shank Diameter - Inch (d)":["0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.65625","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.53125","0.5625","0.625","0.75"],"Diameter - Fractional Size (D)":["1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","17/32","9/16","5/8","3/4"],"Diameter - Letter Size (D)":"E","Diameter-Sizes":"0.11811\" - 19.05mm","Flute-Sizes":"31.75mm - 107.95mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"57.15mm - 146.05mm","Shank-Sizes":"3mm - 0.75\"","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20233/Drills_-_Drill_-_CARBIDE_TWIST_-_List_233"],"Friendly Name":"233"}
5171

5171

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":["4","3","5"],"Overall Length - Metric (L)":["42","43","44","46","48","50","52","68","74","83","94","101","106","113","120","136","139","150","156","162","168","174"],"Shank Diameter - Metric (d)":["3","4","5","6","7","8","9","10","11","12","16","20"],"Diameter - Inch (D)":["0.07874","0.08268","0.08661","0.09055","0.09449","0.09843","0.10236","0.1063","0.11024","0.11417","0.11811","0.12205","0.12598","0.12992","0.13386","0.1378","0.14173","0.14567","0.14961","0.15354","0.15748","0.16142","0.16535","0.16929","0.17323","0.17717","0.1811","0.18504","0.18898","0.19291","0.19685","0.20079","0.20472","0.20866","0.2126","0.21654","0.22047","0.22441","0.22835","0.23228","0.23622","0.24016","0.24409","0.24803","0.25197","0.25591","0.25984","0.26378","0.26772","0.27217","0.27559","0.27953","0.28346","0.2874","0.29134","0.29528","0.29921","0.30315","0.30709","0.31102","0.31496","0.3189","0.32283","0.32677","0.33071","0.33465","0.33858","0.34252","0.34646","0.35039","0.35433","0.35827","0.3622","0.36614","0.37008","0.37402","0.37795","0.38189","0.38583","0.38976","0.3937","0.39764","0.40157","0.40551","0.40945","0.41339","0.41732","0.42126","0.4252","0.42913","0.43307","0.43701","0.44094","0.44488","0.44882","0.45276","0.45669","0.46063","0.46457","0.4685","0.47244","0.47638","0.49606","0.55512","0.5748","0.61417","0.63386","0.65354","0.69291","0.73228"],"Flute Length - Metric (FL)":["12","13","14","16","18","20","22","25","28","32","35","40","45","50","57","63","71","76","79","90","96","102","108","114"],"Diameter - Metric (D)":["2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.3","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.3","11.4","11.5","11.6","11.7","11.8","11.9","12","12.1","12.6","14.1","14.6","15.6","16.1","16.6","17.6","18.6"],"Substrate":"Carbide","Web Literature 1":["8002024CA-DR,118|8002024CA-DRT,24","8002024CA-DR,119|8002024CA-DRT,24","8002024CA-DR,120|8002024CA-DRT,24","8002024CA-DR,122|8002024CA-DRT,24","8002024CA-DR,121|8002024CA-DRT,24"],"Shank Tolerance":"h6","Cutting Diameter Tolerance Specification":"h8","Web Literature 4":"800387CA","Brand":"EXOCARB","Notes":"EXOCARB VX taps recommended.","Full Description":"EXOCARB® WH70-DRL Drills The High Performance Drilling Solution for Hardened Steels 54-70Rc","Hardened Steels : 50-70 HRC":"H; Best","Coolant Thru":"No","Units":"Metric","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Length of Cut - Specification":["STUB","JOBBER"],"Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011","+0 / -0.0013"],"List Name":"WH70-DRL","Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027","+0 / -0.033"],"Surface Treatment":"WXS","Point Thinning":["X Thinning","W Thinning","R+W Thinning"],"Short Description":"The High Performance Drilling Solution for Hardened Steels 54-70Rc","Helix Angle - Degree":"12","Point Angle - Degree (α)":"120","Product Overview":"2 Flute, Low helix, WXS®","Diameter-Sizes":"0.07874\" - 18.6mm","Flute-Sizes":"12mm - 114mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"42mm - 174mm","Shank-Sizes":"3mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%205171/Drills_-_Drill_-_EXOCARB_WH-70_-_List_5171_-_Catalog"],"Friendly Name":"5171"}
5210

5210

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"5","Shank Diameter - Metric (d)":["3","4","6","8","10","16","18","20","5","7","9","11","12","13","14","15","17","19"],"Diameter - Inch (D)":["0.09375","0.125","0.15625","0.161","0.171875","0.1875","0.203125","0.213","0.21875","0.234375","0.257","0.265625","0.28125","0.2969","0.3125","0.328125","0.332","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.53125","0.55512","0.55906","0.5625","0.56299","0.56693","0.5748","0.57874","0.58268","0.58661","0.625","0.63386","0.65625","0.75","0.75787","0.07874","0.08268","0.08661","0.09055","0.09449","0.09843","0.10236","0.1063","0.10866","0.10945","0.11024","0.11417","0.11811","0.12205","0.12402","0.12598","0.12835","0.12992","0.13386","0.1378","0.14173","0.14409","0.14488","0.14567","0.14764","0.14961","0.15354","0.15748","0.16142","0.16535","0.16929","0.17323","0.17717","0.1811","0.18189","0.18268","0.18504","0.18898","0.19094","0.19291","0.19685","0.20079","0.20472","0.20669","0.20866","0.2126","0.21654","0.21732","0.21811","0.22047","0.22441","0.22835","0.23228","0.23622","0.24016","0.24409","0.24606","0.24803","0.25","0.25197","0.25591","0.25984","0.26378","0.26575","0.26772","0.27165","0.27559","0.27953","0.28346","0.28543","0.2874","0.28976","0.29055","0.29134","0.29528","0.29606","0.29685","0.29921","0.30315","0.30512","0.30709","0.31102","0.31496","0.3189","0.32283","0.3248","0.32677","0.33071","0.33465","0.33858","0.34252","0.34449","0.34646","0.35039","0.35433","0.35827","0.3622","0.36378","0.36417","0.36457","0.36614","0.3685","0.36929","0.37008","0.37402","0.3748","0.37559","0.37795","0.38189","0.38386","0.38583","0.38976","0.3937","0.39764","0.40157","0.40354","0.40551","0.40945","0.41339","0.41732","0.42126","0.42323","0.4252","0.42913","0.43307","0.43701","0.44094","0.44173","0.44252","0.44488","0.44724","0.44803","0.44882","0.45276","0.45669","0.46063","0.46457","0.4685","0.47244","0.47638","0.48031","0.48425","0.48819","0.49213","0.49606","0.50197","0.50394","0.50787","0.51181","0.51575","0.51969","0.52165","0.52362","0.52756","0.5315","0.53543","0.53937","0.54331","0.54724","0.55118","0.57087","0.59055","0.59449","0.59843","0.60039","0.60236","0.6063","0.61024","0.61417","0.61811","0.62205","0.62598","0.62992","0.64961","0.66929","0.68898","0.70866","0.72835","0.74803","0.76772","0.7874"],"Overall Length - Metric (L)":["70","86","95","100","109","118","128","136","146","156","167","176","185","193","184","205","78","191","198"],"Flute Length - Metric (FL)":["22","29","36","37","40","44","42","45","48","53","55","58","60","64","67","68","70","73","76","80","83","86","89","92","96","99","102","108","113","114","115","116","117","118","119","120","128","134","135","18","19","20","21","23","24","25","26","27","28","30","31","32","33","34","35","38","39","41","43","46","47","49","50","51","52","54","56","57","59","61","62","63","65","66","69","71","72","74","75","77","78","79","81","82","84","85","87","88","90","91","93","94","95","97","98","100","101","103","104","105","106","107","109","110","111","112","121","122","123","124","125","126","127","130","133","137","140"],"Diameter - Metric (D)":["2.381","3.175","3.969","4.0894","4.365625","4.7625","5.159375","5.4102","5.556","5.953","6.5278","6.747","7.144","7.541","7.9375","8.334375","8.4328","8.731","9.128","9.525","9.922","10.319","10.715625","11.1125","11.509375","11.906","12.303","12.7","13.494","14.1","14.2","14.2875","14.3","14.4","14.6","14.7","14.8","14.9","15.875","16.1","16.669","19.05","19.25","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.76","2.78","2.8","2.9","3","3.1","3.15","3.2","3.26","3.3","3.4","3.5","3.6","3.66","3.68","3.7","3.75","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.62","4.64","4.7","4.8","4.85","4.9","5","5.1","5.2","5.25","5.3","5.4","5.5","5.52","5.54","5.6","5.7","5.8","5.9","6","6.1","6.2","6.25","6.3","6.35","6.4","6.5","6.6","6.7","6.75","6.8","6.9","7","7.1","7.2","7.25","7.3","7.36","7.38","7.4","7.5","7.52","7.54","7.6","7.7","7.75","7.8","7.9","8","8.1","8.2","8.25","8.3","8.4","8.5","8.6","8.7","8.75","8.8","8.9","9","9.1","9.2","9.24","9.25","9.26","9.3","9.36","9.38","9.4","9.5","9.52","9.54","9.6","9.7","9.75","9.8","9.9","10","10.1","10.2","10.25","10.3","10.4","10.5","10.6","10.7","10.75","10.8","10.9","11","11.1","11.2","11.22","11.24","11.3","11.36","11.38","11.4","11.5","11.6","11.7","11.8","11.9","12","12.1","12.2","12.3","12.4","12.5","12.6","12.75","12.8","12.9","13","13.1","13.2","13.25","13.3","13.4","13.5","13.6","13.7","13.8","13.9","14","14.5","15","15.1","15.2","15.25","15.3","15.4","15.5","15.6","15.7","15.8","15.9","16","16.5","17","17.5","18","18.5","19","19.5","20"],"Helix Angle - Degree":"30","Short Description":"Advanced Performance Coolant-Fed Carbide Drills for Stainless Steel","Substrate":"Carbide","Product Overview":"5xD, Coolant Thru, WXL®","Shank Tolerance":"h6","Web Literature 1":["8002024CA-DR,198|8002024CA-DRT,8","8002024CA-DR,162|8002024CA-DRT,8","8002024CA-DR,236|8002024CA-DRT,8","8002024CA-DR,50|8002024CA-DRT,8","8002024CA-DR,122|8002024CA-DRT,8","8002024CA-DR,184|8002024CA-DRT,8","8002024CA-DR,186|8002024CA-DRT,8","8002024CA-DR,192|8002024CA-DRT,8","8002024CA-DR,283|8002024CA-DRT,8"],"Cutting Diameter Tolerance Specification":"h8","Web Literature 2":"800284CA-V3","Benefit 4":"Enables the creation of compact cutting chips","Web Literature 4":"800387CA","Benefit 1":"Higher coating oxidation temperature & hardness dramatically improve wear resistance","Length of Cut - Specification":"JOBBER","Cast Iron":"K; Best","Web Literature 3":"80069CA","Web Video 3":"https://www.youtube.com/watch?v=2qrotaZFtBs","Brand":"A Brand","Web Video 1":"https://www.youtube.com/watch?v=3j1knu2aEMg","Hardened Steels : 35 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Web Video 2":"https://www.youtube.com/watch?v=L6HpXqHkbVk","Stainless Steels : 17-4PH":"M; Best","List Name":"ADO-SUS-5D","Stainless Steels : 300":"M; Best","Aluminum : Casting":"N; Good","Stainless Steels : 400":"M; Best","Benefit 3":"Improved coolant delivery at the cutting edge supresses heat buildup and improves chip evacuation, thereby increasing tool life and enabling faster drilling speeds.","Medium Carbon Steel : 1035; 1045":"P; Best","Units":["Inch","Metric"],"Feature 4":"New flute geometry","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","Feature 1":"OSG's WXL^® nano coating technology","Notes":"MEGA COOLER applies to diameter sizes over 6mm.","Feature 3":"Mega Cooler^™ internal coolant holes","Point Thinning":"R Thinning","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011","+0 / -0.0013"],"Feature 2":"Wavy form cutting edge design","Titanium : 6AL4V (30HRC)":"S; Best","Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027","+0 / -0.033"],"Surface Treatment":"WXL","Full Description":"The A Brand ADO-SUS drill series is OSG's premium line of carbide coolant-fed high performance drills, designed to drill in stainless steel. New \"Mega Cooler™\" coolant hole shape improves coolant flow, chip evacuation and cutting heat generation. This reduces work hardening, which leads to longer tool life during tapping and reaming operations. While our proprietary WXL coating provides drastically higher coating oxidation temperature and hardness that dramatically improves wear resistance.","Benefit 2":"Sharper cutting action reduces thrust forces and produces smaller chips for easy hole processing","Coolant Thru":"Yes","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["3/32","1/8","5/32","11/64","3/16","13/64","7/32","15/64","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","17/32","9/16","5/8","21/32","3/4","1/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["F","Q","E"],"Diameter-Sizes":"0.07874\" - 20mm","Flute-Sizes":"18mm - 140mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"70mm - 205mm","Shank-Sizes":"3mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%205210/Drills_-_A_Brand_ADO-SUS_-_List_5210_-_Catalog"],"Friendly Name":"5210"}
5732

5732

{"Diameter - Metric (D)":["4.8641","6.3754","9.5504","12.7254"],"Number of Flutes":"2","Overall Length - Metric (L)":["101.6","152.4"],"Drilling L/D Ratio (xD)":["8","6","3"],"Shank Diameter - Metric (d)":["4.86","6.37","9.55","12.72"],"Diameter - Inch (D)":["0.1915","0.25","0.376","0.501"],"Flute Length - Metric (FL)":["50.8","101.6"],"List Name":"AERO-H","Helix Angle - Degree":"40","Substrate":"Carbide","Web Literature 1":"8002024CA-DR,122|8002024CA-DRT,22","Shank Tolerance":"h6","Feature 2":"Corner radius and end gash","Notes":"Drills are oversize over nominal.","Web Literature 2":"800212CA-V4","Web Literature 4":"800387CA","Brand":"EXOCARB","Benefit 1":"Improves chip evacuation","Units":["Inch","Metric"],"Coolant Thru":"No","Feature 1":"Parabolic flute form","Short Description":"Premium High Performance TiALN Coated Carbide Stack Drill for All Stacks","Benefit 3":"Provides a sharper cutting edge to reduce burr height","Carbon Fiber (CFRP)":"Other; Best","Carbon Fiber / Al / Ti / CRES Stack":"Other; Best","Carbon Fiber / Titanium Stack":"Other; Best","Carbon Fiber / Aluminum Stack":"Other; Good","Benefit 2":"Resists chipping","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Feature 3":"TiALN coating","Helix Direction":"RH","Length of Cut - Specification":["TAPER","STUB"],"Cutting Diameter Tolerance - Inch":"+0 / -0.0011","Full Description":"The EXOCARB® AERO-H is a TiAlN coated carbide drill designed for composite and metal stacks. It features a high helix and parabolic flute form for improved chip evacuation as well as corner radius and end gash to resist chipping.","Surface Treatment":"TiAlN","Product Overview":"Stack Drill for All Stacks","Diameter - Wire Gage (D)":"11","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["1/4","3/8","1/2"],"Diameter-Sizes":"0.1915\" - 12.7254mm","Flute-Sizes":"50.8mm - 101.6mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"101.6mm - 152.4mm","Shank-Sizes":"4.86mm - 12.72mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%205732/Composites_-_Drill_-_EXOCARB_AERO-H_-_List_5732_-_Catalog"],"Friendly Name":"5732"}
5955Ni

5955Ni

{"Diameter - Metric (D)":["3.3","3.4","3.49","3.5","3.6","3.7","3.8","3.9","4","4.1","4.15","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.56","5.6","5.7","5.8","5.9","6","6.5","6.8","7","7.5","7.8","8","8.5","8.58","8.7","8.8","9","9.5","9.8","9.97","10","10.3","10.5","10.8","11","11.5","11.56","11.8","12","3","3.175","3.51","3.969","4.366","4.763","5.159","5.22","5.53","5.556","5.953","6.35","6.65","6.747","6.96","7.144","7.541","7.938","8.04","8.334","8.52","8.731","9.128","9.39","9.525","9.9","9.922","10.319","10.716","10.83","11.113","11.47","11.509","11.906","12.303","12.7"],"Number of Flutes":"2","Drilling L/D Ratio (xD)":"5","Diameter - Inch (D)":["0.12992","0.13386","0.1374","0.1378","0.14173","0.14567","0.14961","0.15354","0.15748","0.16142","0.16339","0.16535","0.16929","0.17323","0.17717","0.1811","0.18504","0.18898","0.19291","0.19685","0.20079","0.20472","0.20866","0.2126","0.21654","0.2189","0.22047","0.22441","0.22835","0.23228","0.23622","0.25591","0.26772","0.27559","0.29528","0.30709","0.31496","0.33465","0.3378","0.34252","0.34646","0.35433","0.37402","0.38583","0.39252","0.3937","0.40551","0.41339","0.4252","0.43307","0.45276","0.45512","0.46457","0.47244","0.11811","0.125","0.13819","0.15625","0.171875","0.1875","0.203125","0.2055","0.21772","0.21875","0.234375","0.25","0.26181","0.265625","0.27402","0.28125","0.296875","0.3125","0.31654","0.328125","0.33543","0.34375","0.359375","0.36969","0.375","0.38976","0.390625","0.40625","0.421875","0.42638","0.4375","0.45157","0.453125","0.46875","0.484375","0.5"],"Shank Diameter - Metric (d)":["6","8","10","12","14"],"Overall Length - Metric (L)":["78","88","92","102","118","128","136","146","156","167"],"Flute Length - Metric (FL)":["32","34","36","38","41","43","45","42","44","46","48","52","56","60","64","68","70","72","76","80","84","88","92","94","96","29","54","55","58","62","66","74","78","90","100","104"],"Substrate":"Carbide","Product Overview":"5xD, Coolant Thru, 2 Flute, WXS®","Hardened Steels : 50-70 HRC":"H; Good","Shank Tolerance":"h6","Benefit 3":"Coolant delivery at the cutting edge reduces heat and improves chip evacuation, thereby increasing tool life and enabling faster drilling speeds.","Cutting Diameter Tolerance Specification":"h8","Surface Treatment":"DUROREY","Web Literature 1":["8002024CA-DR,95|8002024CA-DRT,19","8002024CA-DR,122|8002024CA-DRT,19","8002024CA-DR,105|8002024CA-DRT,19","8002024CA-DR,119|8002024CA-DRT,19","8002024CA-DR,120|8002024CA-DRT,19","8002024CA-DR,96|8002024CA-DRT,19"],"Web Literature 2":"800257CA-V3","Web Literature 4":"800387CA","Brand":"EXOPRO","Benefit 1":"Higher coating oxidation temp & hardness dramatically improve wear resistance in high hardened and high heat materials.","Length of Cut - Specification":"JOBBER","Hardened Steels : 45-50 HRC":"H; Best","Hardened Steels : 35 HRC":"H; Good","Cast Iron":"K; Good","Web Video 3":"https://www.youtube.com/watch?v=h5-FdaE39h4","Hardened Steels : 35-45 HRC":"H; Good","Feature 2":"Lower helix angle","Benefit 2":"Lower helix angles create stronger cutting faces, essential when cutting Ni-Alloys and hardened steels.","Web Video 1":"https://www.youtube.com/watch?v=LcTdNmtWnD4","Web Video 2":"https://www.youtube.com/watch?v=W9vw8dTqz6M","Feature 3":"Internal coolant holes","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Feature 1":"OSG's WXS Nano Coating Technology","Point Thinning":"R Thinning","Units":["Metric","Inch"],"Alloy Steels : 4140; 4340":"P; Best","Cutting Direction":"RH","View Catalog Page":"Here","View Speed and Feed Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0007","+0 / -0.0009","+0 / -0.0011","+0 / -0.0006"],"Nickel Alloy : Inconel":"S; Best","List Name":"WHO55-5D","Cutting Diameter Tolerance - Metric":["+0 / -0.018","+0 / -0.022","+0 / -0.027","+0 / -0.014"],"Full Description":"The EXOPRO WHO-Ni drill series is OSG's premium performance drilling line for processing Ni-Alloys and Heat Resistant Super Alloys like Inconel 718. This latest innovation from OSG features our own proprietary WXS nano-coating, which has been developed by OSG specifically for high heat applications. Lower helix angles increase point rigidity while internal coolant holes further aid in heat resistance and stable chip evacuation in holes up to 5X diameter.","Coolant Thru":"Yes","Short Description":"The Ultimate in Drilling Performance for Hardened Steels and Nickel Alloys","Helix Angle - Degree":"12-20","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["1/8","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2"],"Diameter-Sizes":"0.11811\" - 12.7mm","Flute-Sizes":"29mm - 104mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"78mm - 167mm","Shank-Sizes":"6mm - 14mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%205955Ni/Drills_-_Drill_-_EXOPRO_WHO-Ni_-_List_5955Ni_-_Side_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%205955Ni/Drills_-_Drill_-_EXOPRO_WHO-Ni_-_List_5955Ni_-_Extra_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%205955Ni/Drills_-_Drill_-_EXOPRO_WHO-Ni_-_List_5955Ni_-_Extra_5"],"Friendly Name":"5955Ni"}
6502

6502

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"5","Diameter - Inch (D)":["0.02756","0.02953","0.0315","0.03346","0.03543","0.0374","0.03937","0.04331","0.04724","0.05118","0.05512","0.05906","0.06299","0.06693","0.07087","0.0748","0.07874"],"Overall Length - Metric (L)":["47","50","55","60","65"],"Shank Diameter - Metric (d)":["3"],"Flute Length - Metric (FL)":["7","7.5","8","8.5","9","9.5","10","11","12","13","14","15","16","17","18","19","20"],"Diameter - Metric (D)":["0.7","0.75","0.8","0.85","0.9","0.95","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2"],"Helix Angle - Degree":"30","Product Overview":"5xD, Coolant Thru, IchAda Coating","Substrate":"Carbide","Benefit 4":"Chips are discharged from the tip of the flute to the extended flute with enhanced evacuation capability","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,10","Feature 2":"Double Margin","Shank Tolerance":"h6","Web Literature 2":"800311CA","Feature 4":"Extended Flute","Web Literature 4":"800387CA","Length of Cut - Specification":"JOBBER","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","Web Video 3":"https://www.youtube.com/watch?v=4-hTRZ9ecOA","High Carbon Steel : 1065":"P; Best","Brand":"A Brand","Benefit 1":"Large flow volume enables superior chip evacuation","Hardened Steels : 35-45 HRC":"H; Good","Web Video 1":"https://www.youtube.com/watch?v=QSKdyt7u9jg","List Name":"ADO-MICRO-5D","Aluminum : 6061; 7075":"N; Good","Stainless Steels : 17-4PH":"M; Best","Web Video 2":"https://www.youtube.com/watch?v=zEjOcYRvrAs","Low Carbon Steel : 1010; 1018":"P; Best","Stainless Steels : 300":"M; Best","Surface Treatment":"IchAda","Feature 3":"IchAda Coating","Aluminum : Casting":"N; Good","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Feature 1":"Oil Holes","Benefit 3":"Provides excellent surface smoothness","Units":"Metric","Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Cutting Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0004","Helix Direction":"RH","Benefit 2":"Supports straightness of drill direction","Cutting Diameter Tolerance - Metric":"+0 / -0.009","Full Description":"The A Brand ADO-MICRO is ideal for applications in carbon steel, alloy steel, stainless steel, cast iron, ductile cast iron, aluminum alloy, titanium alloy and heat resistant alloy.","Short Description":"The A Brand ADO-MICRO is ideal for applications in carbon steel, alloy steel, stainless steel, cast iron, ductile cast iron, aluminum alloy, titanium alloy and heat resistant alloy.","Nickel Alloy : Inconel":"S; Good","Point Thinning":"X Thinning","Titanium : 6AL4V (30HRC)":"S; Good","Coolant Thru":"Yes","Point Angle - Degree (α)":"135","Diameter-Sizes":"0.02756\" - 2mm","Flute-Sizes":"7mm - 20mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"47mm - 65mm","Shank-Sizes":"3mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%206502/Drills_-_Drill_-_A_Brand_ADO-MICRO_-_List_6502_-_Catalog"],"Friendly Name":"6502"}
6510

6510

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"5","Shank Diameter - Metric (d)":["3","6","8","18","20","4","5","7","9","10","11","12","13","14","15","16","17","19"],"Diameter - Inch (D)":["0.07874","0.08268","0.08661","0.09375","0.09449","0.1063","0.125","0.15625","0.161","0.171875","0.1875","0.203125","0.213","0.21875","0.234375","0.25","0.257","0.265625","0.28125","0.296875","0.3125","0.328125","0.332","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.53125","0.5625","0.625","0.63386","0.65625","0.75","0.75787","0.09055","0.09843","0.10236","0.109375","0.11024","0.11417","0.11811","0.12205","0.12598","0.12992","0.13386","0.1378","0.14173","0.14567","0.14961","0.15354","0.15748","0.16142","0.16535","0.16929","0.17323","0.17717","0.1811","0.18504","0.18898","0.19291","0.19685","0.20079","0.20472","0.20866","0.2126","0.21654","0.22047","0.22441","0.22835","0.23228","0.23622","0.24016","0.24409","0.24803","0.25197","0.25591","0.25984","0.26378","0.26772","0.27165","0.27559","0.27953","0.28346","0.2874","0.29134","0.29528","0.29921","0.30315","0.30709","0.31102","0.31496","0.3189","0.32283","0.32677","0.33071","0.33465","0.33858","0.34252","0.34646","0.35039","0.35433","0.35827","0.3622","0.36614","0.37008","0.37402","0.37795","0.38189","0.38583","0.38976","0.3937","0.39764","0.40157","0.40551","0.40945","0.41339","0.41732","0.42126","0.4252","0.42913","0.43307","0.43701","0.44094","0.44488","0.44882","0.45276","0.45669","0.46063","0.46457","0.4685","0.47244","0.47638","0.48031","0.48425","0.48819","0.49213","0.49606","0.50394","0.50787","0.51181","0.51575","0.51969","0.52362","0.52756","0.5315","0.53543","0.53937","0.54331","0.54724","0.55118","0.55512","0.55906","0.56299","0.56693","0.57087","0.5748","0.57874","0.58268","0.58661","0.59055","0.59449","0.59843","0.60236","0.6063","0.61024","0.61417","0.61811","0.62205","0.62598","0.62992","0.64961","0.66929","0.68898","0.70866","0.72835","0.74803","0.76772","0.7874"],"Flute Length - Metric (FL)":["18","19","20","22","25","29","36","37","40","44","42","45","48","52","53","55","58","60","64","67","68","70","73","76","80","83","86","89","92","96","99","102","108","115","128","129","134","154","21","23","24","26","27","28","30","31","32","33","34","35","38","39","41","43","46","47","49","50","51","54","56","57","59","61","62","63","65","66","69","71","72","74","75","77","78","79","81","82","84","85","87","88","90","91","93","94","95","97","98","100","101","103","104","105","106","107","109","110","111","112","113","114","116","117","118","119","120","121","122","123","124","125","126","127","132","136","140","144","148","152","156","160"],"Overall Length - Metric (L)":["70","78","86","95","100","109","118","128","136","146","156","167","176","185","193","201","217","209","225"],"Diameter - Metric (D)":["2","2.1","2.2","2.381","2.4","2.7","3.175","3.969","4.089","4.366","4.763","5.159","5.41","5.556","5.953","6.35","6.528","6.747","7.144","7.541","7.938","8.334","8.433","8.731","9.128","9.525","9.922","10.319","10.716","11.113","11.509","11.906","12.303","12.7","13.494","14.288","15.875","16.1","16.669","19.05","19.25","2.3","2.5","2.6","2.778","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.3","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.3","11.4","11.5","11.6","11.7","11.8","11.9","12","12.1","12.2","12.3","12.4","12.5","12.6","12.8","12.9","13","13.1","13.2","13.3","13.4","13.5","13.6","13.7","13.8","13.9","14","14.1","14.2","14.3","14.4","14.5","14.6","14.7","14.8","14.9","15","15.1","15.2","15.3","15.4","15.5","15.6","15.7","15.8","15.9","16","16.5","17","17.5","18","18.5","19","19.5","20"],"Helix Angle - Degree":"30","Substrate":"Carbide","Product Overview":"5xD, Coolant Thru, EgiAs coating","Benefit 3":"Coolant delivery at the cutting edge reduces heat and improves chip evacuation, thereby increasing tool life and enabling faster drilling speeds.","Web Literature 1":["8002024CA-DR,162|8002024CA-DRT,2","8002024CA-DR,199|8002024CA-DRT,2","8002024CA-DR,186|8002024CA-DRT,2","8002024CA-DR,184|8002024CA-DRT,2","8002024CA-DR,258|8002024CA-DRT,2","8002024CA-DR,254|8002024CA-DRT,2","8002024CA-DR,245|8002024CA-DRT,2","8002024CA-DR,209|8002024CA-DRT,2","8002024CA-DR,220|8002024CA-DRT,2","8002024CA-DR,273|8002024CA-DRT,2","8002024CA-DR,283|8002024CA-DRT,2"],"Shank Tolerance":"h6","Surface Treatment":"EgiAs","Cutting Diameter Tolerance Specification":"h8","Web Literature 2":"800284CA-V3|800284CA-V3","Short Description":"High Performance Coolant-Fed Carbide Drills for Ferrous and Non-Ferrous Materials","Benefit 1":"Higher coating oxidation temp & hardness dramatically improve wear resistance","Web Literature 4":"800387CA","Length of Cut - Specification":"JOBBER","Web Literature 3":"80065CA|800362CA|800363CA|800382CA","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","Web Video 3":"https://www.youtube.com/watch?v=35yVUYJzzx0","Brand":"A Brand","Web Video 2":"https://www.youtube.com/watch?v=EckQITvhvB8","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Aluminum : 6061; 7075":"N; Good","List Name":"ADO-5D","Hardened Steels : 45-50 HRC":"H; Good","Web Video 1":"https://www.youtube.com/watch?v=wd3tVuwRzgE","Aluminum : Casting":"N; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Feature 3":"Internal coolant holes","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Feature 1":"OSG's EgiAs Nano Coating Technology","Point Thinning":"R Thinning","Units":["Metric","Inch"],"Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","Cutting Direction":"RH","High Carbon Steel : 1065":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0006","+0 / -0.0007","+0 / -0.0009","+0 / -0.0011","+0 / -0.0013"],"Feature 2":"Wavy form cutting edge design","Nickel Alloy : Inconel":"S; Good","Full Description":"The A Brand ADO drill series is OSG's premium line of carbide coolant-fed high performance drills, designed to drill in a variety of steels up to 50X diameter without pecking. New point geometry creates sharp cutting action for reduced thrust forces, while our proprietary EgiAs coating provides drastically higher hardness and heat resistance, enabling higher drilling speeds and incredible tool life.","Cutting Diameter Tolerance - Metric":["+0 / -0.014","+0 / -0.018","+0 / -0.022","+0 / -0.027","+0 / -0.033"],"Titanium : 6AL4V (30HRC)":"S; Good","Benefit 2":"Sharper cutting action reduces thrust forces and produces smaller chips for easy hole processing","Coolant Thru":"Yes","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["3/32","1/8","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","17/32","9/16","5/8","21/32","3/4","7/64"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.34375","0.4375","0.5","0.625","0.75"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["E","F","Q"],"Diameter-Sizes":"0.07874\" - 20mm","Flute-Sizes":"18mm - 160mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"70mm - 225mm","Shank-Sizes":"3mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%206510/Drills_-_Drill_-_A_Brand_ADO_-_List_6510_-_5D_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%206510/Drills_-_Drill_-_A_Brand_ADO_-_List_6510_-_5D_-_Angle_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%206510/Drills_-_Drill_-_A_Brand_ADO_-_List_6510_-_5D_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%206510/Drills_-_Drill_-_A_Brand_ADO_-_List_6510_-_5D_-_Extra","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%206510/Drills_-_Drill_-_A_Brand_ADO_-_List_6510_-_5D_-_Group_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%206510/Drills_-_Drill_-_A_Brand_ADO_-_List_6510_-_5D_-_Group_1"],"Friendly Name":"6510"}
6610

6610

{"Number of Flutes":"3","Diameter - Metric (D)":["3.175","3.969","4.089","4.366","4.763","5.159","5.41","5.556","5.953","6.35","6.528","6.747","7.144","7.541","7.938","8.334","8.433","8.731","9.128","9.525","9.922","10.319","10.716","11.113","11.509","11.906","12.303","12.7","13.494","14.288","15.081","15.875","16.1","16.669","16.84","17.463","17.859","18.256","19.05","3","3.3","3.5","3.66","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.1","6.2","6.3","6.4","6.5","6.6","6.7","6.8","6.9","7","7.1","7.2","7.3","7.38","7.4","7.5","7.6","7.7","7.8","7.9","8","8.1","8.2","8.3","8.4","8.5","8.6","8.7","8.8","8.9","9","9.1","9.2","9.25","9.3","9.38","9.4","9.5","9.6","9.7","9.8","9.9","10","10.1","10.2","10.3","10.4","10.5","10.6","10.7","10.8","10.9","11","11.1","11.2","11.25","11.3","11.38","11.4","11.5","11.6","11.7","11.8","11.9","12","12.2","12.5","12.6","13","13.1","13.25","13.3","13.38","13.5","13.6","13.8","14","14.1","14.2","14.3","14.5","14.7","15","15.1","15.2","15.3","15.5","16","16.5","17","17.25","17.5","18","18.5","19","19.25","19.5","20"],"Drilling L/D Ratio (xD)":["7","6"],"Diameter - Inch (D)":["0.125","0.15625","0.161","0.171875","0.1875","0.203125","0.213","0.21875","0.234375","0.25","0.257","0.265625","0.28125","0.296875","0.3125","0.328125","0.332","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.53125","0.5625","0.59375","0.625","0.63386","0.65625","0.66299","0.6875","0.703125","0.71875","0.75","0.11811","0.12992","0.1378","0.14409","0.15748","0.16142","0.16535","0.16929","0.17323","0.17717","0.1811","0.18504","0.18898","0.19291","0.19685","0.20079","0.20472","0.20866","0.2126","0.21654","0.22047","0.22441","0.22835","0.23228","0.23622","0.24016","0.24409","0.24803","0.25197","0.25591","0.25984","0.26378","0.26772","0.27165","0.27559","0.27953","0.28346","0.2874","0.29055","0.29134","0.29528","0.29921","0.30315","0.30709","0.31102","0.31496","0.3189","0.32283","0.32677","0.33071","0.33465","0.33858","0.34252","0.34646","0.35039","0.35433","0.35827","0.3622","0.36417","0.36614","0.36929","0.37008","0.37402","0.37795","0.38189","0.38583","0.38976","0.3937","0.39764","0.40157","0.40551","0.40945","0.41339","0.41732","0.42126","0.4252","0.42913","0.43307","0.43701","0.44094","0.44291","0.44488","0.44803","0.44882","0.45276","0.45669","0.46063","0.46457","0.4685","0.47244","0.48031","0.49213","0.49606","0.51181","0.51575","0.52165","0.52362","0.52677","0.5315","0.53543","0.54331","0.55118","0.55512","0.55906","0.56299","0.57087","0.57874","0.59055","0.59449","0.59843","0.60236","0.61024","0.62992","0.64961","0.66929","0.67913","0.68898","0.70866","0.72835","0.74803","0.75787","0.76772","0.7874"],"Flute Length - Metric (FL)":["29","36","37","40","43","42","44","45","48","52","53","55","58","60","64","67","68","70","73","76","80","83","86","89","92","96","99","102","108","115","121","128","129","134","135","140","143","147","154","27","30","32","33","38","39","41","46","47","49","50","51","54","56","57","59","61","62","63","65","66","69","71","72","74","75","77","78","79","81","82","84","85","87","88","90","91","93","94","95","98","100","101","104","105","106","107","109","111","112","113","114","116","118","120","122","123","124","132","136","138","144","148","152","156","160"],"Overall Length - Metric (L)":["86","95","100","109","118","128","136","146","156","167","176","185","193","201","209","217","78","225"],"Shank Diameter - Inch (d)":["0.125","0.15625","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"List Name":"ADO-TRS-5D","Helix Angle - Degree":"30","Short Description":"Advanced Performance High Feed 3-Flute Carbide Drills","Substrate":"Carbide","Product Overview":"5xD, Coolant Thru, 3 Flute, EgiAs Coating","Feature 3":"Coolant Through","Shank Tolerance":"h6","Web Literature 1":["8002024CA-DR,205|8002024CA-DRT,9","8002024CA-DR,199|8002024CA-DRT,9","8002024CA-DR,200|8002024CA-DRT,9","8002024CA-DR,245|8002024CA-DRT,9","8002024CA-DR,238|8002024CA-DRT,9","8002024CA-DR,208|8002024CA-DRT,9","8002024CA-DR,202|8002024CA-DRT,9","8002024CA-DR,220|8002024CA-DRT,9","8002024CA-DR,258|8002024CA-DRT,9","8002024CA-DR,275|8002024CA-DRT,9","8002024CA-DR,269|8002024CA-DRT,9","8002024CA-DR,236|8002024CA-DRT,9","8002024CA-DR,283|8002024CA-DRT,9"],"Surface Treatment":"EgiAs","Cutting Diameter Tolerance Specification":"h8","Feature 1":"EgiAs Coating","Web Literature 2":"800318CA|800284CA-V3","Web Literature 4":"800387CA","Benefit 1":"For exceptional wear resistance and toughness","Benefit 3":"For reduced heat and improved chip evacuation","Benefit 2":"For reduced vibration and stable drilling","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","Brand":"A Brand","Web Video 1":"https://www.youtube.com/watch?v=Daioc-5QoSQ","Full Description":"A Brand ADO-TRS is an Advanced Performance High Feed 3-Flute Carbide Drill. Patented geometry permits stable chip ejection, even with less chip pocket space inherent in 3-flute drills. The result is up to 3X faster than 2-flute drills and up to 3X longer","Web Video 3":"https://www.youtube.com/watch?v=J9I7gybSon0","Hardened Steels : 35-45 HRC":"H; Good","Web Video 2":"https://www.youtube.com/watch?v=KH-bZ-p8nUs","Low Carbon Steel : 1010; 1018":"P; Best","Aluminum : Casting":"N; Good","Stainless Steels : 400":"M; Best","Medium Carbon Steel : 1035; 1045":"P; Best","Units":["Inch","Metric"],"Stainless Steels : 17-4PH":"M; Good","Point Thinning":"R Thinning","Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","Cutting Direction":"RH","High Carbon Steel : 1065":"P; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":["+0 / -0.0007","+0 / -0.0009","+0 / -0.0011","+0 / -0.0013"],"Length of Cut - Specification":"TAPER","Cutting Diameter Tolerance - Metric":["+0 / -0.018","+0 / -0.022","+0 / -0.027","+0 / -0.033"],"Titanium : 6AL4V (30HRC)":"S; Good","Coolant Thru":"Yes","Diameter - Fractional Size (D)":["1/8","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","17/32","9/16","19/32","5/8","21/32","11/16","45/64","23/32","3/4"],"Point Angle - Degree (α)":"140","Feature 2":"3 Flute Design","Shank Diameter - Metric (d)":["6","8","10","18","3","4","12","14","16","20"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["E","F","Q"],"Diameter-Sizes":"0.11811\" - 20mm","Flute-Sizes":"27mm - 160mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"78mm - 225mm","Shank-Sizes":"3mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%206610/Drills_-_Drill_-_A_Brand_ADO-TRS_-_List_6610_-_5D_-_Catalog"],"Friendly Name":"6610"}
7530

7530

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"4","Shank Diameter - Metric (d)":["2.5","3.27","4.1","4.86","5.62","6.37","7.96","9.55","11.13","12.72"],"Diameter - Inch (D)":["0.0985","0.129","0.1615","0.1915","0.2215","0.25","0.3125","0.375","0.4375","0.5"],"Overall Length - Metric (L)":["50.8","76.2","101.6","152.4"],"Flute Length - Metric (FL)":["15.2","20.3","25.4","27.9","33","38.1","48.2","58.4","66","76.2"],"Diameter - Metric (D)":["2.5019","3.2766","4.1021","4.8641","5.6261","6.3754","7.9629","9.5504","11.1379","12.7254"],"List Name":"AERO-S","Diameter - Wire Gage (D)":["40","30","20","11","2"],"Helix Angle - Degree":"40","Substrate":"Carbide","Web Literature 1":["8002024CA-DR,122|8002024CA-DRT,21","8002024CA-DR,225|8002024CA-DRT,21","8002024CA-DR,245|8002024CA-DRT,21"],"Shank Tolerance":"h6","Surface Treatment":"DIAMOND","Feature 2":"Drill point designed for cutting stacks","Notes":"Drills are oversize over nominal.","Web Literature 2":"800212CA-V4","Feature 1":"High helix angle","Product Overview":"High Helix, Stack Drill","Benefit 4":"Ensures smoother and sharper cutting edges providing up to 50 times longer tool life","Brand":"EXOPRO","Web Literature 4":"800387CA","Units":"Inch","Coolant Thru":"No","Feature 4":"OSG's patented diamond coating","Short Description":"Premium High Performance Diamond Coated Carbide High Helix Stack Drill","Benefit 2":"Provides optimal cutting geometry for cutting multiple material stacks","Carbon Fiber (CFRP)":"Other; Best","Carbon Fiber / Aluminum Stack":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Honeycomb: AI/AI":"Other; Best","Honeycomb: CFRP/AI":"Other; Best","Honeycomb: CFRP/Nomex":"Other; Good","Honeycomb: GFRP/Nomex":"Other; Good","Benefit 3":"Reduces thrust and improves chip evacuation","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Length of Cut - Specification":"STUB","Cutting Diameter Tolerance - Inch":"+0 / -0.001","Full Description":"The EXOPRO AERO-S is a high helix diamond coated drill designed for composites and metal stack materials. It is specifically developed to shear through tough fibers. It features OSG's patented diamond coating and unique geometries such as high helix to assist in chip evacuation.","Feature 3":"Thin web and wide flutes","Benefit 1":"Shears through tough fibers","Point Angle - Degree (α)":"120","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"0.0985\" - 12.7254mm","Flute-Sizes":"15.2mm - 76.2mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50.8mm - 152.4mm","Shank-Sizes":"2.5mm - 12.72mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207530/Composites_-_Drill_-_EXOPRO_AERO-S_-_List_7530_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207530/Composites_-_Drill_-_EXOPRO_AERO-S_-_List_7530_-_Catalog"],"Friendly Name":"7530"}
7532

7532

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"4","Shank Diameter - Metric (d)":["2.5","3.27","4.1","4.86","5.62","6.37","7.96","9.55","11.13","12.72"],"Diameter - Inch (D)":["0.0985","0.129","0.1615","0.1915","0.2215","0.25","0.3125","0.375","0.4375","0.5"],"Overall Length - Metric (L)":["50.8","76.2","101.6","152.4"],"Flute Length - Metric (FL)":["15.2","20.3","25.4","27.9","33","38.1","48.2","58.4","66","76.2"],"Diameter - Metric (D)":["2.5019","3.2766","4.1021","4.8641","5.6261","6.3754","7.9629","9.5504","11.1379","12.7254"],"List Name":"AERO-H","Diameter - Wire Gage (D)":["40","30","20","11","2"],"Helix Angle - Degree":"40","Substrate":"Carbide","Web Literature 1":"8002024CA-DR,122|8002024CA-DRT,22","Shank Tolerance":"h6","Feature 2":"Corner radius and end gash","Surface Treatment":"DIAMOND","Notes":"Drills are oversize over nominal.","Web Literature 2":"800212CA-V4","Benefit 3":"Ensures smoother and sharper cutting edges providing up to 50 times longer tool life","Brand":"EXOPRO","Web Literature 4":"800387CA","Benefit 1":"Improves chip evacuation","Units":"Inch","Coolant Thru":"No","Feature 1":"Parabolic flute form","Feature 3":"OSG's patented diamond coating","Short Description":"Premium High Performance Diamond Coated Carbide Stack Drill for All Stacks","Carbon Fiber (CFRP)":"Other; Best","Carbon Fiber / Al / Ti / CRES Stack":"Other; Best","Carbon Fiber / Titanium Stack":"Other; Best","Carbon Fiber / Aluminum Stack":"Other; Good","Benefit 2":"Resists chipping","Cutting Direction":"RH","View Speed and Feed Page":"Here","View Catalog Page":"Here","Helix Direction":"RH","Length of Cut - Specification":"STUB","Cutting Diameter Tolerance - Inch":"+0 / -0.001","Full Description":"The EXOPRO® AERO-H is a diamond coated carbide drill specifically designed for composite/metal stack applications. It features high helix and parabolic flute form for improved chip evacuation as well as corner radius and end gash to resist chipping.","Product Overview":"Stack Drill for All Stacks","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"0.0985\" - 12.7254mm","Flute-Sizes":"15.2mm - 76.2mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50.8mm - 152.4mm","Shank-Sizes":"2.5mm - 12.72mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Angle_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Extra_5","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Side_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%207532/Composites_-_Drill_-_EXOPRO_AERO-H_-_List_7532_-_Side_2"],"Friendly Name":"7532"}
HP245

HP245

{"Number of Flutes":"2","Drilling L/D Ratio (xD)":"5","Overall Length - Metric (L)":["38","45","52","50","56","66","74","82","91","103","118","124","133","143","153"],"Diameter - Inch (D)":["0.03937","0.04331","0.046875","0.04724","0.05118","0.05512","0.05906","0.0625","0.06299","0.06693","0.07087","0.0748","0.078125","0.07874","0.08268","0.08661","0.09055","0.09375","0.09449","0.09843","0.10236","0.1063","0.109375","0.11024","0.11417","0.11811","0.12205","0.125","0.12598","0.12992","0.13386","0.1378","0.140625","0.14173","0.14567","0.14961","0.15354","0.15625","0.15748","0.161","0.16142","0.16535","0.16929","0.171875","0.17323","0.17717","0.1811","0.18307","0.18504","0.1875","0.18898","0.19291","0.19685","0.20079","0.203125","0.20472","0.20866","0.2126","0.213","0.21654","0.21875","0.22047","0.22441","0.22835","0.23228","0.234375","0.23622","0.24016","0.24409","0.24803","0.25","0.25197","0.25591","0.257","0.25984","0.26378","0.265625","0.26772","0.27165","0.27559","0.27953","0.28125","0.28346","0.2874","0.29134","0.29528","0.296875","0.29921","0.30315","0.30709","0.31102","0.3125","0.31496","0.3189","0.32283","0.32677","0.328125","0.33071","0.332","0.33465","0.33858","0.34252","0.34375","0.34646","0.35039","0.35433","0.35827","0.359375","0.3622","0.36417","0.36614","0.37008","0.37402","0.375","0.37795","0.38189","0.38583","0.38976","0.390625","0.3937","0.39764","0.40157","0.40551","0.40625","0.40945","0.41339","0.41732","0.42126","0.421875","0.4252","0.42913","0.43307","0.43701","0.4375","0.44094","0.44488","0.44882","0.45276","0.453125","0.45669","0.46063","0.46457","0.4685","0.46875","0.47244","0.47638","0.48031","0.484375","0.48819","0.49213","0.49606","0.5","0.50394","0.50787","0.51181","0.515625","0.51969","0.52362","0.52756","0.53125","0.5315","0.53937","0.55118","0.5625","0.57087","0.578125","0.57874","0.59055","0.59375","0.61024","0.61811","0.625","0.62992","0.63386","0.64961","0.65625","0.66929","0.68898","0.70866","0.72835","0.74803","0.75","0.75787","0.76772","0.7874"],"Shank Diameter - Metric (d)":["3","6","8","10","12","14","16","18","20"],"Flute Length - Metric (FL)":["9","11","12","14","16","18","20","22","23","28","36","44","53","61","71","77","83","93","101"],"Diameter - Metric (D)":["1","1.1","1.191","1.2","1.3","1.4","1.5","1.588","1.6","1.7","1.8","1.9","1.984","2","2.1","2.2","2.3","2.381","2.4","2.5","2.6","2.7","2.778","2.8","2.9","3","3.1","3.175","3.2","3.3","3.4","3.5","3.572","3.6","3.7","3.8","3.9","3.969","4","4.089","4.1","4.2","4.3","4.366","4.4","4.5","4.6","4.65","4.7","4.763","4.8","4.9","5","5.1","5.159","5.2","5.3","5.4","5.41","5.5","5.556","5.6","5.7","5.8","5.9","5.953","6","6.1","6.2","6.3","6.35","6.4","6.5","6.528","6.6","6.7","6.747","6.8","6.9","7","7.1","7.144","7.2","7.3","7.4","7.5","7.541","7.6","7.7","7.8","7.9","7.938","8","8.1","8.2","8.3","8.334","8.4","8.433","8.5","8.6","8.7","8.731","8.8","8.9","9","9.1","9.128","9.2","9.25","9.3","9.4","9.5","9.525","9.6","9.7","9.8","9.9","9.922","10","10.1","10.2","10.3","10.319","10.4","10.5","10.6","10.7","10.716","10.8","10.9","11","11.1","11.113","11.2","11.3","11.4","11.5","11.509","11.6","11.7","11.8","11.9","11.906","12","12.1","12.2","12.303","12.4","12.5","12.6","12.7","12.8","12.9","13","13.097","13.2","13.3","13.4","13.494","13.5","13.7","14","14.288","14.5","14.684","14.7","15","15.081","15.5","15.7","15.875","16","16.1","16.5","16.669","17","17.5","18","18.5","19","19.05","19.25","19.5","20"],"Helix Angle - Degree":"30","Product Overview":"5D, Solid, EgiAs","Substrate":"Carbide","Feature 4":"DIN Shanks (6, 8, 10, 12, 14, 16, 18, 20mm)","Shank Tolerance":"h6","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,32","Web Literature 2":"800220CA-V6","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"Higher coating oxidation temp & hardness dramatically improve wear resistance","List Name":"HP-5D","Web Literature 4":"800387CA","Length of Cut - Specification":"JOBBER","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Benefit 4":"Larger shank provides more rigidity and minimizes the number of holders/collets needed to accommodate all sizes","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Brand":"HY-PRO CARB","Aluminum : Casting":"N; Good","Feature 1":"Negative Radial Rake","Medium Carbon Steel : 1035; 1045":"P; Best","Coolant Thru":"No","Cutting Diameter Tolerance Specification":"m7","Short Description":"Performance Carbide Drills for a Variety of Materials & Applications","Benefit 2":"Provides more consistent performance from the first hole to the last hole","Point Thinning":"R Thinning","Feature 2":"Refined honing on cutting edge","Units":["Metric","Inch"],"Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Cutting Direction":"RH","Benefit 1":"Stronger cutting edge to resist chipping","Helix Direction":"RH","Full Description":"The HY-PRO CARB carbide drill series is an ideal blend of performance and cost-efficiency. Strong radial rake combined with precision point geometry and EgiAs coating makes this drill extremely versatile in application. Be it solid or coolant-through, these drills yield incredible performance at depths from 3X to 8X Diameter.","Cutting Diameter Tolerance - Inch":["+0.0001 / +0.0005","+0.0002 / +0.0006","+0.0002 / +0.0008","+0.0003 / +0.0010","+0.0003 / +0.0011"],"Cutting Diameter Tolerance - Metric":["+0.002 / +0.012","+0.004 / +0.016","+0.006 / +0.021","+0.007 / +0.025","+0.008 / +0.029"],"Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","33/64","17/32","9/16","37/64","19/32","5/8","21/32","3/4"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["E","F","Q"],"Diameter-Sizes":"0.03937\" - 20mm","Flute-Sizes":"9mm - 101mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38mm - 153mm","Shank-Sizes":"3mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP245/Drills_-_Drill_-_HY-PRO_CARB_-_List_HP245_-_Catalog"],"Friendly Name":"HP245"}
HP255

HP255

{"Diameter - Metric (D)":["3","3.1","3.175","3.2","3.3","3.4","3.5","3.572","3.6","3.7","3.8","3.9","3.969","4","4.089","4.1","4.2","4.3","4.366","4.4","4.5","4.6","4.65","4.7","4.763","4.8","4.9","5","5.1","5.159","5.2","5.3","5.4","5.41","5.5","5.556","5.6","5.7","5.8","5.9","5.953","6","6.1","6.2","6.3","6.35","6.4","6.5","6.528","6.6","6.7","6.746","6.8","6.9","7","7.1","7.145","7.2","7.3","7.4","7.5","7.541","7.6","7.7","7.8","7.9","7.938","8","8.1","8.2","8.3","8.334","8.4","8.433","8.5","8.6","8.7","8.733","8.8","8.9","9","9.1","9.129","9.2","9.25","9.3","9.4","9.5","9.525","9.6","9.7","9.8","9.9","9.921","10","10.1","10.2","10.3","10.319","10.4","10.5","10.6","10.7","10.716","10.8","10.9","11","11.1","11.113","11.2","11.3","11.4","11.5","11.509","11.6","11.7","11.8","11.9","11.908","12","12.1","12.2","12.3","12.4","12.5","12.6","12.7","12.8","12.9","13","13.1","13.2","13.3","13.4","13.495","13.5","13.7","14","14.288","14.5","14.684","14.7","15","15.083","15.5","15.7","15.875","16","16.1","16.5","16.669","17","17.5","18","18.5","19","19.05","19.25","19.5","20"],"Number of Flutes":"2","Drilling L/D Ratio (xD)":"5","Diameter - Inch (D)":["0.11811","0.12205","0.125","0.12598","0.12992","0.13386","0.1378","0.140625","0.14173","0.14567","0.14961","0.15354","0.15625","0.15748","0.161","0.16142","0.16535","0.16929","0.171875","0.17323","0.17717","0.1811","0.18307","0.18504","0.1875","0.18898","0.19291","0.19685","0.20079","0.203125","0.20472","0.20866","0.2126","0.213","0.21654","0.21875","0.22047","0.22441","0.22835","0.23228","0.234375","0.23622","0.24016","0.24409","0.24803","0.25","0.25197","0.25591","0.257","0.25984","0.26378","0.265625","0.26772","0.27165","0.27559","0.27953","0.28125","0.28346","0.2874","0.29134","0.29528","0.296875","0.29921","0.30315","0.30709","0.31102","0.3125","0.31496","0.3189","0.32283","0.32677","0.328125","0.33071","0.332","0.33465","0.33858","0.34252","0.34375","0.34646","0.35039","0.35433","0.35827","0.359375","0.3622","0.36417","0.36614","0.37008","0.37402","0.375","0.37795","0.38189","0.38583","0.38976","0.390625","0.3937","0.39764","0.40157","0.40551","0.40625","0.40945","0.41339","0.41732","0.42126","0.421875","0.4252","0.42913","0.43307","0.43701","0.4375","0.44094","0.44488","0.44882","0.45276","0.453125","0.45669","0.46063","0.46457","0.4685","0.46875","0.47244","0.47638","0.48031","0.48425","0.48819","0.49213","0.49606","0.5","0.50394","0.50787","0.51181","0.51575","0.51969","0.52362","0.52756","0.53125","0.5315","0.53937","0.55118","0.5625","0.57087","0.578125","0.57874","0.59055","0.59375","0.61024","0.61811","0.625","0.62992","0.63386","0.64961","0.65625","0.66929","0.68898","0.70866","0.72835","0.74803","0.75","0.75787","0.76772","0.7874"],"Overall Length - Metric (L)":["66","74","82","91","103","118","124","133","143","153"],"Flute Length - Metric (FL)":["28","36","44","53","61","71","77","83","93","101"],"Shank Diameter - Metric (d)":["6","8","10","12","14","16","18","20"],"Helix Angle - Degree":"30","Product Overview":"5D, Coolant Thru, EgiAs","Substrate":"Carbide","Feature 4":"DIN Shanks (6, 8, 10, 12, 14, 16, 18, 20mm)","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,30","Shank Tolerance":"h6","Web Literature 2":"800220CA-V6","Surface Treatment":"EgiAs","Feature 3":"EgiAs Coating","Benefit 3":"Higher coating oxidation temp & hardness dramatically improve wear resistance","List Name":"HP-OH-5D","Length of Cut - Specification":"JOBBER","Web Literature 4":"800387CA","Hardened Steels : 35 HRC":"H; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Benefit 4":"Larger shank provides more rigidity and minimizes the number of holders/collets needed to accommodate all sizes","Hardened Steels : 35-45 HRC":"H; Good","Low Carbon Steel : 1010; 1018":"P; Best","Brand":"HY-PRO CARB","Aluminum : Casting":"N; Good","Feature 1":"Negative Radial Rake","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Good","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Short Description":"Performance Carbide Coolant Drills for a Variety of Materials & Applications","Cutting Diameter Tolerance Specification":"m7","Benefit 2":"Provides more consistent performance from the first hole to the last hole","Point Thinning":"R Thinning","Feature 2":"Refined honing on cutting edge","Units":["Metric","Inch"],"Alloy Steels : 4140; 4340":"P; Best","Die Steels":"P; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Cutting Direction":"RH","Benefit 1":"Stronger cutting edge to resist chipping","Helix Direction":"RH","Nickel Alloy : Inconel":"S; Good","Titanium : 6AL4V (30HRC)":"S; Good","Full Description":"The HY-PRO CARB carbide drill series is an ideal blend of performance and cost-efficiency. Strong radial rake combined with precision point geometry and EgiAs coating makes this drill extremely versatile in application. Be it solid or coolant-through, these drills yield incredible performance at depths from 3X to 8X Diameter.","Cutting Diameter Tolerance - Inch":["+0.0001 / +0.0005","+0.0002 / +0.0006","+0.0002 / +0.0008","+0.0003 / +0.0010","+0.0003 / +0.0011"],"Cutting Diameter Tolerance - Metric":["+0.002 / +0.012","+0.004 / +0.016","+0.006 / +0.021","+0.007 / +0.025","+0.008 / +0.029"],"Coolant Thru":"Yes","Point Angle - Degree (α)":"140","Diameter - Fractional Size (D)":["1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","1/2","17/32","9/16","37/64","19/32","5/8","21/32","3/4"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["E","F","Q"],"Diameter-Sizes":"0.11811\" - 20mm","Flute-Sizes":"28mm - 101mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"66mm - 153mm","Shank-Sizes":"6mm - 20mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP255/Drills_-_Drill_-_HY-PRO_CARB_-_List_HP255_-_Catalog"],"Friendly Name":"HP255"}
HP355

HP355

{"Diameter - Metric (D)":["3","3.1","3.17","3.2","3.3","3.4","3.5","3.57","3.6","3.7","3.8","3.9","3.97","4","4.089","4.1","4.2","4.3","4.37","4.4","4.5","4.6","4.65","4.7","4.76","4.8","4.9","5","5.1","5.16","5.2","5.3","5.4","5.41","5.5","5.56","5.6","5.7","5.8","5.9","5.95","6","6.1","6.2","6.3","6.35","6.4","6.5","6.528","6.6","6.7","6.75","6.8","6.9","7","7.1","7.14","7.2","7.3","7.4","7.5","7.54","7.6","7.7","7.8","7.9","7.94","8","8.1","8.2","8.3","8.33","8.4","8.433","8.5","8.6","8.7","8.73","8.8","8.9","9","9.1","9.13","9.2","9.25","9.3","9.4","9.5","9.52","9.6","9.7","9.8","9.9","9.92","10","10.1","10.2","10.3","10.32","10.4","10.5","10.6","10.7","10.72","10.8","10.9","11","11.1","11.11","11.2","11.3","11.4","11.5","11.51","11.6","11.7","11.8","11.9","11.91","12","12.1","12.2","12.3","12.4","12.5","12.6","12.7"],"Number of Flutes":"2","Drilling L/D Ratio (xD)":"5","Diameter - Inch (D)":["0.11811","0.12205","0.125","0.12598","0.12992","0.13386","0.1378","0.14063","0.14173","0.14567","0.14961","0.15354","0.15625","0.15748","0.161","0.16142","0.16535","0.16929","0.17188","0.17323","0.17717","0.1811","0.18307","0.18504","0.1875","0.18898","0.19291","0.19685","0.20079","0.20313","0.20472","0.20866","0.2126","0.213","0.21654","0.21875","0.22047","0.22441","0.22835","0.23228","0.23438","0.23622","0.24016","0.24409","0.24803","0.25","0.25197","0.25591","0.257","0.25984","0.26378","0.26563","0.26772","0.27165","0.27559","0.27953","0.28125","0.28346","0.2874","0.29134","0.29528","0.29688","0.29921","0.30315","0.30709","0.31102","0.3125","0.31496","0.3189","0.32283","0.32677","0.32813","0.33071","0.332","0.33465","0.33858","0.34252","0.34375","0.34646","0.35039","0.35433","0.35827","0.35938","0.3622","0.36417","0.36614","0.37008","0.37402","0.375","0.37795","0.38189","0.38583","0.38976","0.39063","0.3937","0.39764","0.40157","0.40551","0.40625","0.40945","0.41339","0.41732","0.42126","0.42188","0.4252","0.42913","0.43307","0.43701","0.4375","0.44094","0.44488","0.44882","0.45276","0.45313","0.45669","0.46063","0.46457","0.4685","0.46875","0.47244","0.47638","0.48031","0.48438","0.48819","0.49213","0.49606","0.5"],"Overall Length - Metric (L)":["66","74","82","91","103","118","124"],"Shank Diameter - Metric (d)":["6","8","10","12","14"],"Flute Length - Metric (FL)":["28","36","44","53","61","71","77"],"List Name":"ALD-HO-5D","Surface Treatment":"BRIGHT","Substrate":"Carbide","Product Overview":"5D, Coolant Thru, Bright","Shank Tolerance":"h6","Feature 1":"Double Margin","Length of Cut - Specification":"JOBBER","Aluminum : Casting":"N; Best","Benefit 4":"Lower thrust force at higher feeds.","Brand":"HY-PRO CARB","Benefit 1":"Improved stability & hole straightness.","Cutting Diameter Tolerance Specification":"m7","Feature 2":"Polished Flutes","Units":["Metric","Inch"],"Cutting Direction":"RH","Aluminum : 6061; 7075":"N; Best","Helix Direction":"RH","Feature 4":"Straight Cutting Edge","Point Thinning":"X Thinning","Full Description":"The HY-PRO CARB carbide drill series is an ideal blend of performance and cost-efficiency. HY-PRO CARB ALD is capable of stable chip formation & evacuation, and good quality holes over a wide range of feed rates, enabling high efficiency drilling in aluminum alloy and other non-ferrous materials.","Benefit 3":"Sharp & smoothcutting at the center.","Feature 3":"X-Thinning & R-Gash","Coolant Thru":"Yes","Cutting Diameter Tolerance - Inch":["+0.0001 / +0.0005","+0.0002 / +0.0006","+0.0002 / +0.0008","+0.0003 / +0.0010"],"Cutting Diameter Tolerance - Metric":["+0.002 / +0.012","+0.004 / +0.016","+0.006 / +0.021","+0.007 / +0.025"],"Benefit 2":"Smooth chip evacuation, and less BUE at the cutting edge.","Point Angle - Degree (α)":"130","Helix Angle - Degree":"30","Diameter - Fractional Size (D)":["1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2"],"Diameter - Wire Gage (D)":["20","3"],"Diameter - Letter Size (D)":["E","F","Q"],"Diameter-Sizes":"0.11811\" - 12.7mm","Flute-Sizes":"28mm - 77mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"66mm - 124mm","Shank-Sizes":"6mm - 14mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FHP355/Drills_-_Drill_-_HY-PRO_CARB_ALD-HO_-_List_HP355"],"Friendly Name":"HP355"}
HP700

HP700

{"Number of Flutes":"3","Drilling L/D Ratio (xD)":"3","Overall Length - Metric (L)":["38.1"],"Shank Diameter - Metric (d)":["2.48","3.26","4.08","4.85","6.35"],"Diameter - Inch (D)":["0.098","0.1285","0.161","0.191","0.25"],"Flute Length - Metric (FL)":["12.7","15.8"],"Diameter - Metric (D)":["2.49","3.26","4.09","4.85","6.35"],"Helix Angle - Degree":"30","Feature 1":"3-flute design","Diameter - Wire Gage (D)":["40","30","20","11"],"Substrate":"Carbide","Web Literature 1":"8002024CA-DR,283|8002024CA-DRT,23","Shank Tolerance":"h6","Web Literature 2":"800212CA-V4","Product Overview":"Hand Drill","Short Description":"High Performance Carbide Drills for Hand Operations","Web Literature 4":"800387CA","Brand":"HY-PRO CARB","Benefit 1":"Improves stability and increases productivity","List Name":"NEPTUNE","Units":"Inch","Coolant Thru":"No","Benefit 2":"Provides sharper cutting edge","Carbon Fiber (CFRP)":"Other; Best","Carbon Fiber / Al / Ti / CRES Stack":"Other; Best","Carbon Fiber / Aluminum Stack":"Other; Best","Carbon Fiber / Titanium Stack":"Other; Best","View Catalog Page":"Here","View Speed and Feed Page":"Here","Cutting Direction":"RH","Feature 2":"TiALN coating","Notes":"Tri-Flat shank available upon request.","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.001","Full Description":"The HY-PRO CARB® NEPTUNE® is an innovative hand drill designed for a wide variety of tough to machine alloys. The NEPTUNE® features a 3-flute design which provides improved stability and productivity.","Surface Treatment":"TiAlN","Point Angle - Degree (α)":"150","Diameter - Fractional Size (D)":["1/4"],"Pilot Diameter - Metric (Da)":"4.09","Diameter-Sizes":"0.098\" - 6.35mm","Flute-Sizes":"12.7mm - 15.8mm","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"38.1mm","Shank-Sizes":"2.48mm - 6.35mm","Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_3","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_6","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FJobber%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_6","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FDrilling%2FSolid%2FComposite%20Drills%2FList%20HP700/Composites_-_Drill_-_HY-PRO_CARB_NEPTUNE_-_List_HP700_-_Extra_8"],"Friendly Name":"HP700"}

3.00MM HYPRO CARB ALD-HO-5D

EDP: 111503000

ALD-HO-5D
List HP355

5D, Coolant Thru, Bright

Product Overview

Stocked

Quick view

3.00MM HYPRO CARB ALD-HO-5D

EDP: 111503000

ALD-HO-5D
List HP355

5D, Coolant Thru, Bright

Stocked

MSRP:

Was:

Price Now

$142.50

Net Price

Please login to view pricing

Quantity
3.00MM HP CARB OH DRILL 5D

EDP: HP255-1181

HP-OH-5D
List HP255

5D, Coolant Thru, EgiAs

Product Overview

Stocked

Quick view

3.00MM HP CARB OH DRILL 5D

EDP: HP255-1181

HP-OH-5D
List HP255

5D, Coolant Thru, EgiAs

Stocked

MSRP:

Was:

Price Now

$134.82

Net Price

Please login to view pricing

Quantity
1.0 MM HP CARB DRILL 5D

EDP: HP245-0394

HP-5D
List HP245

5D, Solid, EgiAs

Product Overview

Stocked

Quick view

1.0 MM HP CARB DRILL 5D

EDP: HP245-0394

HP-5D
List HP245

5D, Solid, EgiAs

Stocked

MSRP:

Was:

Price Now

$63.99

Net Price

Please login to view pricing

Quantity
3MM A BRAND ADO-TRS-5D

EDP: 8722300

ADO-TRS-5D
List 6610

5xD, Coolant Thru, 3 Flute, EgiAs Coating

Product Overview

Stocked

Quick view

3MM A BRAND ADO-TRS-5D

EDP: 8722300

ADO-TRS-5D
List 6610

5xD, Coolant Thru, 3 Flute, EgiAs Coating

Stocked

MSRP:

Was:

Price Now

$229.94

Net Price

Please login to view pricing

Check availability

Quantity

JOBBER

Preview PDF

ALD-HO-5D

5D, Coolant Thru, Bright

Product Overview

ALD-HO-5D

5D, Coolant Thru, Bright

Net Price

HP-OH-5D

5D, Coolant Thru, EgiAs

Product Overview

HP-OH-5D

5D, Coolant Thru, EgiAs

Net Price

HP-5D

5D, Solid, EgiAs

Product Overview

HP-5D

5D, Solid, EgiAs

Net Price

ADO-TRS-5D

5xD, Coolant Thru, 3 Flute, EgiAs Coating

Product Overview

ADO-TRS-5D

5xD, Coolant Thru, 3 Flute, EgiAs Coating

Net Price