THREADING - STYLE - STRAIGHT FLUTE

10051

10051

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2010051/Taps_-_Tap_-_EXOTAP_VCX_-_List_10051_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["4","5"],"Chamfer Length - Inch":["0.078125","0.104166","0.125","0.089285","0.138888","0.15625","0.192307","0.208333","0.227272","0.25","0.277777","0.178571","0.3125"],"Major Diameter - Inch":["0.138","0.164","0.19","0.25","0.3125","0.375","0.5","0.5625","0.625","0.75","0.875","1"],"Tap Drill Size Max - Inch":["0.114","0.139","0.156","0.164","0.207","0.22","0.265","0.277","0.321","0.34","0.434","0.457","0.49","0.515","0.546","0.578","0.663","0.696","0.778","0.814","0.89","0.928"],"Threads Per Inch":["32","24","20","28","18","16","13","12","11","10","9","14","8"],"Neck Length - Inch (L1)":["0.688","0.751","0.874","1","0.988","1.125","1.251","1.933","1.972","2.126","2.433","2.654","3.012"],"Tap Drill Size Min - Inch":["0.104","0.13","0.145","0.156","0.196","0.211","0.252","0.267","0.307","0.33","0.417","0.446","0.472","0.502","0.527","0.565","0.642","0.682","0.755","0.798","0.865","0.91"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.6875","0.75","0.8125"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255","0.318","0.381","0.367","0.429","0.48","0.59","0.697","0.8"],"Overall Length - Inch (L)":["2","2.125","2.375","2.5","2.719","2.938","3.375","3.594","3.813","4.25","4.688","5.125"],"Thread Length - Inch (Lc)":["0.374","0.5","0.598","0.586","0.665","0.751","0.921","1","1.091","1.201","1.335","1.5"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191","0.238","0.286","0.275","0.322","0.36","0.442","0.523","0.6"],"View Catalog Page":"Here","Benefit 3":"Increased hardness, lubricity & wear resistance","Alloy Steels : 4140; 4340":"P; Good","Chamfer Type":"Modified Bottom (2.5P)","Benefit 4":"Complete Offering","Benefit 2":"For through or blind holes and short chipping materials","Benefit 1":"Harder than CPM, XPM yields maximum hardness ideal for hardeded steels","Coolant Thru":"No","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"15-20","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 4":"Inch & Metric","Feature 1":"OSG proprietary XPM material","Feature 3":"OSG V-Coating","Cutting Speed (SFM) - Hardened Steels : 45-50 HRC":"8-15","Hardened Steels : 45-50 HRC":"H; Best","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 2":"Straight Flute","Web Literature 1":"8002024CA-TP,267","Full Description":"EXOTAP VCX is the ultra-premium solution for threading hardened steels 45-50HrC.","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","List Name":"VCX V-XPM-HT","Meets 2B Class of Fit":["Yes","No"],"Meets 3B Class of Fit":["Yes","No"],"Thread Size - Number":["No. 6","No. 8","No. 10"],"Thread Limit":["H3","H5","h4","h6","H7"],"Short Description":"Premium Design for 42-52 HRC Material","Thread Type":["UNC","UNF"],"STI Thread":"No","Units":"Inch","Surface Treatment":"V","Substrate":"XPM","Product Overview":"XPM, V-Coating","Thread Size - Inch":["1/4","5/16","3/8","1/2","9/16","5/8","3/4","7/8","1"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.688\" - 3.012\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 5.125\"","Shank-Sizes":"0.141\" - 0.8\"","Friendly Name":"10051","CategoryBrand":"EXOTAP"}
10052

10052

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2010052/Taps_-_Tap_-_EXOTAP_DC_-_List_10052_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["4","5"],"Chamfer Length - Inch":["0.075","0.053571","0.083333","0.0625","0.09375","0.107142","0.115384","0.125","0.136363","0.15","0.166666","0.1875"],"Overall Length - Inch (L)":["3.15","3.543","3.937","4.331","4.921","5.512","6.299"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Threads Per Inch":["20","28","18","24","16","14","13","12","11","10","9","8"],"Tap Drill Size Max - Inch":["0.207","0.22","0.265","0.277","0.321","0.34","0.376","0.395","0.434","0.457","0.49","0.515","0.546","0.578","0.663","0.696","0.778","0.814","0.89"],"Neck Length - Inch (L1)":["1.181","1.377","1.712","1.933","1.972","2.125","2.433","2.653","3.011"],"Tap Drill Size Min - Inch":["0.196","0.211","0.252","0.267","0.307","0.33","0.36","0.383","0.417","0.446","0.472","0.502","0.527","0.565","0.642","0.682","0.755","0.798","0.865"],"Square Length - Inch (Ik)":["0.3125","0.375","0.4375","0.40625","0.5","0.5625","0.6875","0.75","0.8125"],"Shank Diameter - Inch (d)":["0.255","0.318","0.381","0.323","0.367","0.429","0.48","0.59","0.697","0.8"],"Thread Length - Inch (Lc)":["0.598","0.665","0.751","0.858","0.921","1","1.09","1.2","1.334","1.5"],"Square Width - Inch (k)":["0.191","0.238","0.286","0.242","0.275","0.322","0.36","0.442","0.523","0.6"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC VP-DC-HT","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 4":"Available DIN or ANSI oberall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Web Literature 1":"8002024CA-TP,270","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Cutting Speed (SFM) - Cast Iron":"25-75","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Meets 2B Class of Fit":"Yes","Product Overview":"CPM, DIN Overall Length, V-Coating","Meets 3B Class of Fit":["Yes","No"],"Thread Limit":["H3","H5"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Thread Type":["UNC","UNF"],"STI Thread":"No","Units":"Inch","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1.181\" - 3.011\"","Taper-Sizes":"-","Overall-Sizes":"3.15\" - 6.299\"","Shank-Sizes":"0.255\" - 0.8\"","Friendly Name":"10052","CategoryBrand":"EXOTAP"}
10053

10053

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2010053/Taps_-_Tap_-_EXOTAP_DC-OIL_-_List_10053_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["4","5"],"Chamfer Length - Inch":["0.075","0.053571","0.083333","0.0625","0.09375","0.107142","0.115384","0.125","0.136363","0.15","0.166666","0.1875"],"Overall Length - Inch (L)":["3.15","3.543","3.937","4.331","4.921","5.512","6.299"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Threads Per Inch":["20","28","18","24","16","14","13","12","11","10","9","8"],"Tap Drill Size Max - Inch":["0.207","0.22","0.265","0.277","0.321","0.34","0.376","0.395","0.434","0.457","0.49","0.515","0.546","0.578","0.663","0.696","0.778","0.814","0.89"],"Neck Length - Inch (L1)":["1.181","1.377","1.712","1.933","1.972","2.125","2.433","2.653","3.011"],"Tap Drill Size Min - Inch":["0.196","0.211","0.252","0.267","0.307","0.33","0.36","0.383","0.417","0.446","0.472","0.502","0.527","0.565","0.642","0.682","0.755","0.798","0.865"],"Square Length - Inch (Ik)":["0.3125","0.375","0.4375","0.40625","0.5","0.5625","0.6875","0.75","0.8125"],"Shank Diameter - Inch (d)":["0.255","0.318","0.381","0.323","0.367","0.429","0.48","0.59","0.697","0.8"],"Thread Length - Inch (Lc)":["0.598","0.665","0.751","0.858","0.921","1","1.09","1.2","1.334","1.5"],"Square Width - Inch (k)":["0.191","0.238","0.286","0.242","0.275","0.322","0.36","0.442","0.523","0.6"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"Yes","Cutting Speed (SFM) - Aluminum : Casting":"50-110","Helix Angle - Degree":"0","Cutting Speed (SFM) - Cast Iron":"40-100","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC-OIL VPO-DC-HT","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 4":"Available DIN or ANSI oberall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Web Literature 1":"8002024CA-TP,272","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Meets 2B Class of Fit":"Yes","Product Overview":"CPM, Coolant Thru, DIN Overall Length, V-Coating","Meets 3B Class of Fit":["Yes","No"],"Thread Limit":["H3","H5"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Thread Type":["UNC","UNF"],"STI Thread":"No","Units":"Inch","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1.181\" - 3.011\"","Taper-Sizes":"-","Overall-Sizes":"3.15\" - 6.299\"","Shank-Sizes":"0.255\" - 0.8\"","Friendly Name":"10053","CategoryBrand":"EXOTAP"}
10056

10056

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2010056/Taps_-_Tap_-_EXOTAP_DC_-_List_10056_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["4","5"],"Chamfer Length - Inch":["0.075","0.053571","0.083333","0.0625","0.09375","0.107142","0.115384","0.125","0.136363","0.15"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75"],"Threads Per Inch":["20","28","18","24","16","14","13","12","11","10"],"Tap Drill Size Max - Inch":["0.207","0.22","0.265","0.277","0.321","0.34","0.376","0.395","0.434","0.457","0.49","0.515","0.546","0.578","0.663","0.696"],"Neck Length - Inch (L1)":["1","1.125","1.251","1.712","1.933","1.972","2.125","2.433"],"Tap Drill Size Min - Inch":["0.196","0.211","0.252","0.267","0.307","0.33","0.36","0.383","0.417","0.446","0.472","0.502","0.527","0.565","0.642","0.682"],"Square Length - Inch (Ik)":["0.3125","0.375","0.4375","0.40625","0.5","0.5625","0.6875"],"Shank Diameter - Inch (d)":["0.255","0.318","0.381","0.323","0.367","0.429","0.48","0.59"],"Overall Length - Inch (L)":["2.5","2.72","2.93","3.15","3.37","3.59","3.81","4.25"],"Thread Length - Inch (Lc)":["0.598","0.665","0.751","0.858","0.921","1","1.09","1.2"],"Square Width - Inch (k)":["0.191","0.238","0.286","0.242","0.275","0.322","0.36","0.442"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC VP-DC-HT","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 4":"Available DIN or ANSI oberall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Web Literature 1":"8002024CA-TP,276","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Cutting Speed (SFM) - Cast Iron":"25-75","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4"],"Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Meets 2B Class of Fit":"Yes","Product Overview":"CPM,V-Coating","Meets 3B Class of Fit":"Yes","Thread Limit":["H3","H5"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Thread Type":["UNC","UNF"],"STI Thread":"No","Units":"Inch","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1\" - 2.433\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.25\"","Shank-Sizes":"0.255\" - 0.59\"","Friendly Name":"10056","CategoryBrand":"EXOTAP"}
10057

10057

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20%2010057/Taps_-_Tap_-_EXOTAP_DC-OIL_-_List_10057_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":"4","Chamfer Length - Inch":["0.075","0.053571","0.083333","0.0625","0.09375","0.107142","0.115384"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.4375","0.5"],"Threads Per Inch":["20","28","18","24","16","14","13"],"Tap Drill Size Max - Inch":["0.207","0.22","0.265","0.277","0.321","0.34","0.376","0.395","0.434","0.457"],"Neck Length - Inch (L1)":["1","1.125","1.251","1.712","1.933"],"Tap Drill Size Min - Inch":["0.196","0.211","0.252","0.267","0.307","0.33","0.36","0.383","0.417","0.446"],"Square Length - Inch (Ik)":["0.3125","0.375","0.4375","0.40625"],"Shank Diameter - Inch (d)":["0.255","0.318","0.381","0.323","0.367"],"Overall Length - Inch (L)":["2.5","2.719","2.938","3.156","3.375"],"Thread Length - Inch (Lc)":["0.598","0.665","0.751","0.858","0.921"],"Square Width - Inch (k)":["0.191","0.238","0.286","0.242","0.275"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"Yes","Cutting Speed (SFM) - Aluminum : Casting":"50-110","Helix Angle - Degree":"0","Cutting Speed (SFM) - Cast Iron":"40-100","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC-OIL VPO-DC-HT","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 4":"Available DIN or ANSI oberall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Web Literature 1":"8002024CA-TP,278","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2"],"Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Meets 2B Class of Fit":"Yes","Product Overview":"CPM, Coolant Thru, V-Coating","Meets 3B Class of Fit":"Yes","Thread Limit":["H3","H5"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Thread Type":["UNC","UNF"],"STI Thread":"No","Units":"Inch","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1\" - 1.933\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 3.375\"","Shank-Sizes":"0.255\" - 0.381\"","Friendly Name":"10057","CategoryBrand":"EXOTAP"}
10059

10059

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2010059/Taps_-_Tap_-_EXOCARB_-_List_10059_-_Straight_Fluted_Taps_-_Catalog"],"Chamfer Length - Inch":["0.0625","0.046875","0.075","0.053571","0.083333","0.09375"],"Number of Flutes":"4","Major Diameter - Inch":["0.19","0.216","0.25","0.3125","0.375"],"Tap Drill Size Max - Inch":["0.156","0.164","0.181","0.207","0.22","0.265","0.277","0.321","0.34"],"Threads Per Inch":["24","32","20","28","18","16"],"Neck Length - Inch (L1)":["0.866","0.874","0.933","0.996","1.007","1.125","1.251"],"Tap Drill Size Min - Inch":["0.145","0.156","0.171","0.196","0.211","0.252","0.267","0.307","0.33"],"Square Length - Inch (Ik)":["0.25","0.28125","0.3125","0.375","0.4375"],"Shank Diameter - Inch (d)":["0.194","0.22","0.255","0.318","0.381"],"Thread Length - Inch (Lc)":["0.492","0.5","0.496","0.594","0.606","0.665","0.751"],"Overall Length - Inch (L)":["2.375","2.5","2.719","2.938"],"Square Width - Inch (k)":["0.152","0.165","0.191","0.238","0.286"],"View Catalog Page":"Here","Cobalt-Chrome":"Other; Best","Cast Iron":"K; Best","Class of Fit":"2B","Chamfer Type":"Bottom (1.5P)","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Copper Alloys":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Fiberglass":"30-60","Helix Angle - Degree":"0","Cutting Direction":"RH","Cutting Speed (SFM) - Aluminum : Casting":"55-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"60-160","Cutting Speed (SFM) - Copper Alloys":"40-80","Cutting Speed (SFM) - Cast Iron":"40-90","Cutting Speed (SFM) - Cobalt-Chrome":"15-40","List Name":"CHT","Fiberglass":"Other; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Full Description":"EXOCARB Taps Carbide Taps for Cast Iron & Aluminum","Web Literature 1":"8002024CA-TP,262","Notes":"Other coatings are available upon request.","Meets 3B Class of Fit":"No","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":"BRIGHT","Meets 2B Class of Fit":"Yes","Substrate":"Carbide","Thread Size - Number":["No. 10","No. 12"],"Short Description":"Tungsten Carbide Taps","Thread Type":["UNC","UNF"],"Product Overview":"Micrograin Carbide","STI Thread":"No","Units":"Inch","Thread Size - Inch":["1/4","5/16","3/8"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.866\" - 1.251\"","Taper-Sizes":"-","Overall-Sizes":"2.375\" - 2.938\"","Shank-Sizes":"0.194\" - 0.381\"","Friendly Name":"10059","CategoryBrand":"EXOCARB"}
10061

10061

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2010061/Taps_-_Tap_-_EXOCARB_-_List_10061_-_Straight_Fluted_Taps_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2010061/Taps_-_Tap_-_EXOCARB_TAP_-_List_10061"],"Number of Flutes":["3","4"],"Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644"],"Chamfer Length - Inch":["0.088582","0.124015","0.141732","0.177165","0.221456","0.265748","0.029527","0.041338","0.047244","0.059055","0.073818"],"Major Diameter - Metric":["3","4","5","6","8","10"],"Overall Length - Metric (L)":["49.2","54","60.3","63.5","69.1","74.6"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774"],"Tap Drill Size Max - Metric":["2.599","3.422","4.334","5.153","7.153","6.912","8.912","8.676"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5"],"Neck Length - Metric (L1)":["16","19.1","22.2","25.8","28.6","31.8"],"Tap Drill Size Min - Metric":["2.459","3.242","4.134","4.917","6.917","6.647","8.647","8.376"],"Square Length - Inch (Ik)":["4.8","6.4","7.9","9.5","11.1"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125"],"Thread Length - Metric (Lc)":["6.2","8.4","9.6","12","15","18"],"Square Width - Inch (k)":["2.79","3.33","3.86","4.85","6.05","7.26"],"View Catalog Page":"Here","Cobalt-Chrome":"Other; Best","Cast Iron":"K; Best","Chamfer Type":["Plug (4.5P)","Bottom (1.5P)"],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Copper Alloys":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Fiberglass":"30-60","Helix Angle - Degree":"0","Cutting Direction":"RH","Cutting Speed (SFM) - Aluminum : Casting":"55-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"60-160","Cutting Speed (SFM) - Copper Alloys":"40-80","Cutting Speed (SFM) - Cast Iron":"40-90","Cutting Speed (SFM) - Cobalt-Chrome":"15-40","List Name":"CHT","Fiberglass":"Other; Good","Interrupted Thread":"No","Full Description":"EXOCARB Taps Carbide Taps for Cast Iron & Aluminum","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,263","Notes":"Other coatings are available upon request.","Meets 3B Class of Fit":"No","Product Category":"Straight Flute","Web Literature 4":"800389CA","Surface Treatment":"BRIGHT","Thread Type":["M","MF"],"Substrate":"Carbide","Thread Limit":["D3","D4","D5","D6"],"Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Short Description":"Tungsten Carbide Taps","Thread Size - Metric":["M3","M4","M5","M6","M8","M10"],"Units":"Metric","Product Overview":"Micrograin Carbide","STI Thread":"No","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"16mm - 31.8mm","Taper-Sizes":"-","Overall-Sizes":"49.2mm - 74.6mm","Shank-Sizes":"3.5814mm - 9.6774mm","Friendly Name":"10061","CategoryBrand":"EXOCARB"}
101

101

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20101/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_101_-_Straight_Fluted_Taps_-_Catalog"],"Overall Length - Inch (L)":["2.720472","4.251968","4.688976","3.15748","3.594488","3.811023","5.125984","2.5","2.937007","3.374015","4.031496","5.437007","5.751968","6.062992","6.374015"],"Number of Flutes":["4","6"],"Major Diameter - Inch":["0.3125","0.75","0.875","0.4375","0.5625","0.625","1","0.25","0.375","0.5","0.6875","1.125","1.25","1.375","1.5"],"Chamfer Length - Inch":["0.5","0.4","0.444444","0.285714","0.125","0.136363","0.15","0.166666","0.1875","0.45","0.2","0.075","0.142857","0.053571","0.222222","0.083333","0.0625","0.25","0.09375","0.307692","0.115384","0.363636","0.321428","0.375","0.5625","0.642857","0.107142","0.692307","0.75","0.333333","0.818181","0.9","1","1.125","0.571428","0.214285","1.285714","1.5","0.666666"],"Tap Drill Size Max - Inch":["0.265","0.663","0.778","0.376","0.49","0.546","0.89","0.207","0.22","0.277","0.321","0.34","0.434","0.457","0.578","0.696","0.395","0.515","0.814","0.938","0.6166","0.634","0.928","0.998","1.053","1.123","1.178","1.225","1.303","1.35","1.428"],"Neck Length - Inch (L1)":["1.322834","2.220472","2.5","1.688976","1.940944","2","2.720472","1.181102","1.413385","1.811023","2.129921","2.940944","3","3.161417","3.381889"],"Tap Drill Size Min - Inch":["0.252","0.642","0.755","0.36","0.472","0.527","0.865","0.196","0.211","0.267","0.307","0.33","0.417","0.446","0.565","0.682","0.383","0.502","0.798","0.923","0.5989","0.62","0.91","0.97","1.035","1.095","1.16","1.195","1.285","1.32","1.41"],"Square Length - Inch (Ik)":["0.375","0.6875","0.75","0.40625","0.5","0.5625","0.8125","0.3125","0.4375","0.625","0.875","1","1.0625","1.125"],"Shank Diameter - Inch (d)":["0.318","0.59","0.697","0.323","0.429","0.48","0.8","0.255","0.381","0.367","0.542","0.896","1.021","1.108","1.233"],"Thread Length - Inch (Lc)":["0.834645","1.5","1.665354","1.070866","1.251968","1.362204","1.874015","0.748031","0.937007","1.153543","2.141732","2.5"],"Square Width - Inch (k)":["0.238","0.442","0.523","0.242","0.322","0.36","0.6","0.191","0.286","0.275","0.406","0.672","0.766","0.831","0.925"],"Threads Per Inch":["18","10","9","14","12","11","8","20","28","24","16","13","7","6"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Benefit 3":"S/O increases mechanical lubricity","Chamfer Type":["Taper (9P)","Plug (4P)","Bottom (1.5P)"],"Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Benefit 4":"Improves wear resistance for extended tap life","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Feature 2":"Straight Flute","Web Literature 1":["8002024CA-TP,287","8002024CA-TP,291","8002024CA-TP,288","8002024CA-TP,289","8002024CA-TP,290","8002024CA-TP,292","8002024CA-TP,286","8002024CA-TP,293","8002024CA-TP,294"],"Notes":"Other coatings are available upon request.","Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Cutting Speed (SFM) - Cast Iron":"25-75","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Thread Size - Inch":["5/16","3/4","7/8","7/16","9/16","5/8","1","1/4","3/8","1/2","11/16","1-1/8","1-1/4","1-3/8","1-1/2"],"Surface Treatment":["BRIGHT","TiCN","Steam Oxide","TiN"],"Meets 2B Class of Fit":"Yes","Thread Limit":["H2","H1","H5","H3","h4","h6"],"Meets 3B Class of Fit":"Yes","High Carbon Steel : 1065":"P; Good","Product Overview":"HSS","Substrate":"HSS","Low Carbon Steel : 1010; 1018":"P; Good","Thread Type":["UNC","UNF","UNS","NS","UN"],"STI Thread":"No","Units":"Inch","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1.181102\" - 3.381889\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 6.374015\"","Shank-Sizes":"0.255\" - 1.233\"","Friendly Name":"101","CategoryBrand":"OSG"}
101C

101C

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20101C/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_101C_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":"4","Overall Length - Inch (L)":["3.594","2.5","2.72","2.937","3.157","3.374","3.811","4.252"],"Major Diameter - Inch":["0.5625","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Chamfer Length - Inch":["0.083333","0.2","0.075","0.142857","0.053571","0.222222","0.166666","0.0625","0.25","0.09375","0.285714","0.107142","0.307692","0.115384","0.333333","0.125","0.363636","0.136363","0.4","0.15"],"Tap Drill Size Max - Inch":["0.515","0.207","0.22","0.265","0.277","0.321","0.34","0.376","0.395","0.434","0.457","0.49","0.546","0.578","0.663","0.696"],"Neck Length - Inch (L1)":["1.941","1.189","1.323","1.413","1.689","1.811","2","2.22"],"Tap Drill Size Min - Inch":["0.502","0.196","0.211","0.252","0.267","0.307","0.33","0.36","0.383","0.417","0.446","0.472","0.527","0.565","0.642","0.682"],"Square Length - Inch (Ik)":["0.5","0.3125","0.375","0.4375","0.40625","0.5625","0.6875"],"Shank Diameter - Inch (d)":["0.429","0.255","0.318","0.381","0.323","0.367","0.48","0.59"],"Thread Length - Inch (Lc)":["1.28","0.756","0.835","0.937","1.071","1.177","1.39","1.531"],"Square Width - Inch (k)":["0.322","0.191","0.238","0.286","0.242","0.275","0.36","0.442"],"Threads Per Inch":["18","20","28","24","16","14","13","12","11","10"],"View Catalog Page":"Here","Cast Iron":"K; Best","Chamfer Type":["Bottom (1.5P)","Plug (4P)"],"Aluminum : Casting":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Full Description":"TAPS FOR CAST IRON Straight Fluted Hand Taps for Cast Iron","Web Literature 1":["8002024CA-TP,283","8002024CA-TP,284"],"Web Literature 4":"800389CA","Units":"Inch","Product Category":"Straight Flute","Thread Size - Inch":["9/16","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Meets 4H Class of Fit":"No","STI Thread":"No","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Thread Limit":["H5","H3"],"Substrate":"HSS","Product Overview":"HSS, Ni/Steamoxide Coating","Surface Treatment":"Nitride / Steam Oxide","Short Description":"Ideal for Cast Iron","Thread Type":["UNF","UNC"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1.189\" - 2.22\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.252\"","Shank-Sizes":"0.255\" - 0.59\"","Friendly Name":"101C","CategoryBrand":"OSG"}
101H

101H

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20101H/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_101H_-_Straight_Fluted_Taps_-_Ctalog"],"Number of Flutes":"4","Chamfer Length - Inch":["0.075","0.083333","0.09375","0.115384","0.136363","0.222222","0.2","0.142857","0.166666","0.25","0.285714","0.307692","0.363636","0.4"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.5","0.625","0.4375","0.75"],"Threads Per Inch":["20","18","16","13","11","28","24","14","10"],"Tap Drill Size Max - Inch":["0.207","0.265","0.321","0.434","0.546","0.578","0.22","0.277","0.34","0.376","0.395","0.457","0.663"],"Neck Length - Inch (L1)":["1.181102","1.322834","1.413385","1.811023","2","1.688976","2.220472"],"Tap Drill Size Min - Inch":["0.196","0.252","0.307","0.417","0.527","0.565","0.211","0.267","0.33","0.36","0.383","0.446","0.642"],"Square Length - Inch (Ik)":["0.3125","0.375","0.4375","0.5625","0.40625","0.6875"],"Shank Diameter - Inch (d)":["0.255","0.318","0.381","0.367","0.48","0.323","0.59"],"Overall Length - Inch (L)":["2.5","2.720472","2.937007","3.374015","3.811023","3.15748","4.251968"],"Thread Length - Inch (Lc)":["0.748031","0.834645","0.937007","1.153543","1.362204","1.070866","1.5"],"Square Width - Inch (k)":["0.191","0.238","0.286","0.275","0.36","0.242","0.442"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Class of Fit":"2B +0.005\"","Chamfer Type":["Bottom (1.5P)","Plug (4P)"],"Benefit 3":"S/O increases mechanical lubricity","Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Benefit 4":"Improves wear resistance for extended tap life","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT +.005 OVERSIZE","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Feature 2":"Straight Flute","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,301","Notes":"Other coatings are available upon request.","Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Meets 3B Class of Fit":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Thread Size - Inch":["1/4","5/16","3/8","1/2","5/8","7/16","3/4"],"Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":["BRIGHT","TiCN","Steam Oxide"],"High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Low Carbon Steel : 1010; 1018":"P; Good","Product Overview":"HSS, 0.005\" Oversize","Thread Type":["UNC","UNF"],"STI Thread":"No","Units":"Inch","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1.181102\" - 2.220472\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 4.251968\"","Shank-Sizes":"0.255\" - 0.59\"","Friendly Name":"101H","CategoryBrand":"OSG"}
101L

101L

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20101L/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_101L_-_Straight_Fluted_Taps_-_Catalog"],"Major Diameter - Inch":["0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1"],"Chamfer Length - Inch":["0.125","0.046875","0.1","0.0375","0.111111","0.041666","0.166666","0.0625","0.2","0.075","0.142857","0.053571","0.222222","0.083333","0.25","0.09375","0.285714","0.107142","0.307692","0.115384","0.333333","0.363636","0.136363","0.4","0.15","0.444444","0.5","0.1875"],"Number of Flutes":["3","4"],"Tap Drill Size Max - Inch":["0.114","0.119","0.139","0.142","0.156","0.164","0.207","0.22","0.265","0.277","0.321","0.34","0.376","0.395","0.434","0.457","0.49","0.515","0.546","0.578","0.663","0.696","0.778","0.814","0.89","0.928"],"Threads Per Inch":["32","40","36","24","20","28","18","16","14","13","12","11","10","9","8"],"Neck Length - Inch (L1)":["0.858","1.003","1.129","1.287","1.322","1.413","1.688","1.811","1.94","2","2.22","2.5","2.72"],"Tap Drill Size Min - Inch":["0.104","0.111","0.13","0.134","0.145","0.156","0.196","0.211","0.252","0.267","0.307","0.33","0.36","0.383","0.417","0.446","0.472","0.502","0.527","0.565","0.642","0.682","0.755","0.798","0.865","0.91"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375","0.4375","0.40625","0.5","0.5625","0.6875","0.75","0.8125"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255","0.318","0.381","0.323","0.367","0.429","0.48","0.59","0.697","0.8"],"Overall Length - Inch (L)":["2","2.125984","2.374015","2.5","2.720472","2.937007","3.15748","3.374015","3.594488","3.811023","4.251968","4.688976","5.125984"],"Thread Length - Inch (Lc)":["0.523","0.539","0.7","0.854","0.834","0.937","1.07","1.153","1.251","1.362","1.5","1.665","1.874"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191","0.238","0.286","0.242","0.275","0.322","0.36","0.442","0.523","0.6"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":["Plug (4P)","Bottom (1.5P)"],"Benefit 3":"S/O increases mechanical lubricity","Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Benefit 4":"Improves wear resistance for extended tap life","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Cutting Direction":"LH","Feature 1":"HSS material","Helix Angle - Degree":"0","List Name":"GENERAL PURPOSE-HT LEFT HAND","Meets 4H Class of Fit":"No","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Low Carbon Steel : 1010; 1018":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 2":"Straight Flute","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Web Literature 1":["8002024CA-TP,318","8002024CA-TP,319"],"Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request.","Units":"Inch","Product Category":"Straight Flute","Short Description":"Left Hand Taps","Product Overview":"Left Handed","Surface Treatment":"BRIGHT","STI Thread":"No","Meets 2B Class of Fit":"Yes","Thread Size - Number":["No. 6","No. 8","No. 10"],"Thread Limit":["H3","H2","h4"],"Meets 3B Class of Fit":["Yes","No"],"High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Thread Type":["UNC","UNF"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.858\" - 2.72\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 5.125984\"","Shank-Sizes":"0.141\" - 0.8\"","Friendly Name":"101L","CategoryBrand":"OSG"}
101N

101N

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20101N/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_101N_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["4","6"],"Chamfer Length - Inch":["0.125","0.046875","0.142857","0.053571","0.166666","0.0625","0.2","0.075"],"Major Diameter - Inch":["0.216","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.8125","0.875","0.9375","1"],"Tap Drill Size Max - Inch":["0.19","0.224","0.286","0.349","0.407","0.47","0.527","0.59","0.652","0.707","0.77","0.832","0.895","0.957"],"Threads Per Inch":["32","28","24","20"],"Neck Length - Inch (L1)":["1.11","1.181","1.323","1.413","1.689","1.811","1.941","2","2.13","2.22","2.382","2.5","2.72"],"Tap Drill Size Min - Inch":["0.182","0.216","0.279","0.341","0.399","0.461","0.517","0.58","0.642","0.696","0.758","0.821","0.883","0.946"],"Square Length - Inch (Ik)":["0.28125","0.3125","0.375","0.4375","0.40625","0.5","0.5625","0.625","0.6875","0.75","0.8125"],"Shank Diameter - Inch (d)":["0.22","0.255","0.318","0.381","0.323","0.367","0.429","0.48","0.542","0.59","0.652","0.697","0.76","0.8"],"Overall Length - Inch (L)":["2.374","2.5","2.72","2.937","3.157","3.374","3.594","3.811","4.031","4.252","4.469","4.689","4.906","5.126"],"Thread Length - Inch (Lc)":["0.622","0.748","0.835","0.937","0.992","1.154","1.252","1.362","1.5","1.665","1.874"],"Square Width - Inch (k)":["0.165","0.191","0.238","0.286","0.242","0.275","0.322","0.36","0.406","0.442","0.489","0.523","0.57","0.6"],"View Catalog Page":"Here","Coolant Thru":"No","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":["Plug (4P)","Bottom (1.5P)"],"Benefit 3":"S/O increases mechanical lubricity","Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Benefit 4":"Improves wear resistance for extended tap life","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Meets 4H Class of Fit":"No","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Low Carbon Steel : 1010; 1018":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 2":"Straight Flute","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Web Literature 1":"8002024CA-TP,307","Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request.","Units":"Inch","Product Category":"Straight Flute","Surface Treatment":"BRIGHT","STI Thread":"No","Meets 2B Class of Fit":"Yes","Thread Size - Number":"No. 12","Thread Limit":"H3","Meets 3B Class of Fit":"Yes","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Product Overview":"UNEF","Thread Type":"UNEF","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","9/16","5/8","11/16","3/4","13/16","7/8","15/16","1"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1.11\" - 2.72\"","Taper-Sizes":"-","Overall-Sizes":"2.374\" - 5.126\"","Shank-Sizes":"0.22\" - 0.8\"","Friendly Name":"101N","CategoryBrand":"OSG"}
102

102

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20102/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_102_-_Straight_Fluted_Taps_-_Catalog"],"Major Diameter - Inch":["0.06","0.073","0.086","0.099","0.112","0.125","0.138","0.164","0.19","0.216"],"Chamfer Length - Inch":["0.1125","0.05","0.01875","0.140625","0.0625","0.023437","0.125","0.055555","0.020833","0.160714","0.071428","0.026785","0.083333","0.225","0.1","0.0375","0.090909","0.28125","0.046875","0.111111","0.375","0.166666","0.142857","0.1875","0.03125","0.25","0.041666","0.204545","0.03409","0.321428","0.053571"],"Number of Flutes":["2","3","4"],"Tap Drill Size Max - Inch":["0.0514","0.0623","0.0635","0.0737","0.0752","0.0845","0.0865","0.0939","0.0968","0.1062","0.1079","0.114","0.139","0.142","0.156","0.164","0.181","0.186","0.0904","0.119"],"Threads Per Inch":["80","64","72","56","48","40","44","32","36","24","28"],"Tap Drill Size Min - Inch":["0.0465","0.0561","0.058","0.0667","0.0691","0.0764","0.0797","0.0849","0.0894","0.0979","0.1004","0.104","0.13","0.134","0.145","0.156","0.171","0.177","0.111"],"Square Length - Inch (Ik)":["0.1875","0.25","0.28125"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.22"],"Overall Length - Inch (L)":["1.625984","1.688976","1.751968","1.811023","1.874015","1.937007","2","2.125984","2.374015"],"Thread Length - Inch (Lc)":["0.311023","0.370078","0.437007","0.496062","0.374015","0.464566","0.468503","0.61811","0.622047"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.165"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Benefit 3":"S/O increases mechanical lubricity","Chamfer Type":["Taper (9P)","Plug (4P)","Bottom (1.5P)"],"Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Benefit 4":"Improves wear resistance for extended tap life","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Feature 2":"Straight Flute","Web Literature 1":["8002024CA-TP,295","8002024CA-TP,296","8002024CA-TP,297","8002024CA-TP,298","8002024CA-TP,299","8002024CA-TP,300"],"Notes":"Other coatings are available upon request.","Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Cutting Speed (SFM) - Cast Iron":"25-75","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":["BRIGHT","Steam Oxide","TiCN","TiN"],"Meets 2B Class of Fit":"Yes","Thread Size - Number":["No. 0","No. 1","No. 2","No. 3","No. 4","No. 5","No. 6","No. 8","No. 10","No. 12"],"Thread Limit":["H1","H2","H7","H3"],"Meets 3B Class of Fit":["Yes","No"],"High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Low Carbon Steel : 1010; 1018":"P; Good","Thread Type":["UNF","UNC","NS"],"STI Thread":"No","Units":"Inch","Neck Length - Inch (L1)":["0.681102","0.744094","0.799212","0.93307","1.047244","1.110236"],"Product Overview":"3 Flute","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.681102\" - 1.110236\"","Taper-Sizes":"-","Overall-Sizes":"1.625984\" - 2.374015\"","Shank-Sizes":"0.141\" - 0.22\"","Friendly Name":"102","CategoryBrand":"OSG"}
102H

102H

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20102H/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_102H_-_Straight_Fluted_Taps_-_Catalog"],"Major Diameter - Inch":["0.138","0.164","0.19"],"Chamfer Length - Inch":["0.125","0.166666"],"Number of Flutes":["3","4"],"Tap Drill Size Max - Inch":["0.114","0.139","0.156","0.164"],"Threads Per Inch":["32","24"],"Neck Length - Inch (L1)":["0.799212","0.93307","1.047244"],"Tap Drill Size Min - Inch":["0.104","0.13","0.145","0.156"],"Square Length - Inch (Ik)":["0.1875","0.25"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194"],"Overall Length - Inch (L)":["2","2.125984","2.374015"],"Thread Length - Inch (Lc)":["0.464566","0.468503","0.61811"],"Square Width - Inch (k)":["0.11","0.131","0.152"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":"Plug (4P)","Class of Fit":"2B +0.005\"","Benefit 3":"S/O increases mechanical lubricity","Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Benefit 4":"Improves wear resistance for extended tap life","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT +.005 OVERSIZE","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Low Carbon Steel : 1010; 1018":"P; Good","Interrupted Thread":"No","Feature 3":"Bright, Steam Oxide surface treatment","Medium Carbon Steel : 1035; 1045":"P; Good","Meets 6H Class of Fit":"No","Feature 2":"Straight Flute","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,302","Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Web Literature 4":"800389CA","Product Overview":"+0.005\" Oversize","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request.","Units":"Inch","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Surface Treatment":["BRIGHT","Steam Oxide"],"STI Thread":"No","Thread Size - Number":["No. 6","No. 8","No. 10"],"High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Thread Type":["UNC","UNF"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.799212\" - 1.047244\"","Taper-Sizes":"-","Overall-Sizes":"2\" - 2.374015\"","Shank-Sizes":"0.141\" - 0.194\"","Friendly Name":"102H","CategoryBrand":"OSG"}
103

103

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20103/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_103_-_Straight_Fluted_Taps_-_Catalog"],"Chamfer Length - Inch":["0.075","0.125","0.046875","0.166666","0.09375","0.0625","0.2","0.222222","0.25","0.142857","0.053571","0.083333","0.285714","0.107142","0.307692","0.115384"],"Major Diameter - Inch":["0.25","0.164","0.19","0.375","0.4375","0.3125","0.5"],"Number of Flutes":"3","Threads Per Inch":["20","32","24","16","18","28","14","13"],"Tap Drill Size Max - Inch":["0.207","0.139","0.156","0.164","0.321","0.395","0.265","0.22","0.277","0.34","0.376","0.434","0.457"],"Neck Length - Inch (L1)":["1.181102","0.93307","1.047244","1.413385","1.688976","1.322834","1.811023"],"Tap Drill Size Min - Inch":["0.196","0.13","0.145","0.156","0.307","0.383","0.252","0.211","0.267","0.33","0.36","0.417","0.446"],"Square Length - Inch (Ik)":["0.3125","0.25","0.4375","0.40625","0.375"],"Shank Diameter - Inch (d)":["0.255","0.168","0.194","0.381","0.323","0.318","0.367"],"Overall Length - Inch (L)":["2.5","2.125984","2.374015","2.937007","3.15748","2.720472","3.374015"],"Thread Length - Inch (Lc)":["0.748031","0.468503","0.61811","0.937007","1.070866","0.834645","1.153543"],"Square Width - Inch (k)":["0.191","0.131","0.152","0.286","0.242","0.238","0.275"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":["Bottom (1.5P)","Plug (4P)"],"Benefit 3":"S/O increases mechanical lubricity","Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Benefit 4":"Improves wear resistance for extended tap life","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Interrupted Thread":"No","Low Carbon Steel : 1010; 1018":"P; Good","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Feature 2":"Straight Flute","Web Literature 1":["8002024CA-TP,303","8002024CA-TP,304"],"Notes":"Other coatings are available upon request.","Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Cutting Speed (SFM) - Cast Iron":"25-75","Thread Size - Inch":["1/4","3/8","7/16","5/16","1/2"],"Product Overview":"3 Flute","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":["BRIGHT","Steam Oxide","TiN"],"Meets 2B Class of Fit":"Yes","Thread Limit":["H2","H1","H3","H5"],"Meets 3B Class of Fit":"Yes","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Thread Type":["UNC","UNF"],"STI Thread":"No","Units":"Inch","Thread Size - Number":["No. 8","No. 10"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.93307\" - 1.811023\"","Taper-Sizes":"-","Overall-Sizes":"2.125984\" - 3.374015\"","Shank-Sizes":"0.168\" - 0.381\"","Friendly Name":"103","CategoryBrand":"OSG"}
104

104

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20104/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_104_-_Straight_Fluted_Taps_-_Catalog"],"Chamfer Length - Inch":["0.0375","0.046875","0.125","0.071428","0.026785","0.1","0.083333","0.03125","0.090909","0.166666","0.0625","0.2","0.075","0.142857","0.053571","0.222222"],"Major Diameter - Inch":["0.112","0.138","0.19","0.086","0.099","0.125","0.164","0.25","0.3125"],"Number of Flutes":"2","Tap Drill Size Max - Inch":["0.0939","0.114","0.119","0.164","0.0737","0.0845","0.1062","0.1079","0.139","0.156","0.207","0.22","0.265"],"Threads Per Inch":["40","32","56","48","44","24","20","28","18"],"Neck Length - Inch (L1)":["0.681102","0.858267","1.129921","0.511811","0.57874","0.795275","1.003937","1.287401","1.322834"],"Tap Drill Size Min - Inch":["0.0849","0.104","0.111","0.156","0.0667","0.0764","0.0979","0.1004","0.13","0.145","0.196","0.211","0.252"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375"],"Shank Diameter - Inch (d)":["0.141","0.194","0.168","0.255","0.318"],"Overall Length - Inch (L)":["1.874015","2","2.374015","1.751968","1.811023","1.937007","2.125984","2.5","2.720472"],"Thread Length - Inch (Lc)":["0.370078","0.523622","0.700787","0.47244","0.53937","0.425196","0.85433"],"Square Width - Inch (k)":["0.11","0.152","0.131","0.191","0.238"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":["Bottom (1.5P)","Plug (4P)"],"Benefit 3":"S/O increases mechanical lubricity","Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Benefit 4":"Improves wear resistance for extended tap life","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Feature 2":"Straight Flute","Web Literature 1":["8002024CA-TP,305","8002024CA-TP,306"],"Notes":"Other coatings are available upon request.","Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Cutting Speed (SFM) - Cast Iron":"25-75","Product Overview":"2 Flute","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":["BRIGHT","Steam Oxide"],"Meets 2B Class of Fit":"Yes","Thread Limit":["H1","H2","H3"],"Thread Size - Number":["No. 4","No. 6","No. 10","No. 2","No. 3","No. 5","No. 8"],"Meets 3B Class of Fit":"Yes","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Low Carbon Steel : 1010; 1018":"P; Good","Thread Type":["UNC","UNF"],"STI Thread":"No","Units":"Inch","Thread Size - Inch":["1/4","5/16"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.511811\" - 1.322834\"","Taper-Sizes":"-","Overall-Sizes":"1.751968\" - 2.720472\"","Shank-Sizes":"0.141\" - 0.318\"","Friendly Name":"104","CategoryBrand":"OSG"}
108

108

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20108/Taps_-_Tap_-_TAPER_PIPE_-_List_108_-_Pipe_Taps"],"Number of Flutes":["4","5","7"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.375","0.5","0.75","1","1.25","1.5","2"],"Threads Per Inch":["27","18","14","11.5"],"Neck Length - Inch (L1)":["0.925","1.318"],"Tap Drill Size Min - Inch":["0.242","0.332","0.4375","0.5625","0.703125","0.90625","1.140625","1.484375","1.71875","2.1875"],"Square Length - Inch (Ik)":["0.375","0.4375","0.5","0.625","0.6875","0.8125","0.9375","1","1.125"],"Shank Diameter - Inch (d)":["0.3125","0.4375","0.5625","0.7","0.6875","0.9063","1.125","1.3125","1.5","1.875"],"Overall Length - Inch (L)":["2.125984","2.437007","2.562992","3.125984","3.251968","3.751968","4","4.251968","4.5"],"Thread Length - Inch (Lc)":["0.688","0.751","1.062","1.374","1.751"],"Square Width - Inch (k)":["0.234","0.328","0.421","0.531","0.515","0.679","0.843","0.984","1.125","1.406"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Benefit 2":"S/O increases mechanical lubricity","Benefit 4":"For standard and dry seal tapered pipe thread applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Benefit 3":"Improves wear resistance for extended tap life","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : 6061; 7075":"15-40","Cutting Speed (SFM) - Aluminum : Casting":"20-35","Cutting Speed (SFM) - High Carbon Steel : 1065":"10-20","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"10-25","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"15-40","Cutting Speed (SFM) - Cast Iron":"15-50","List Name":"GENERAL PURPOSE-NPT/ANPT","Low Carbon Steel : 1010; 1018":"P; Good","Interrupted Thread":"No","Feature 4":"ANPT, NPT, NPTF","Meets 6H Class of Fit":"No","Feature 2":"Bright, Steam Oxide surface treatment","Medium Carbon Steel : 1035; 1045":"P; Good","Meets 2B Class of Fit":"No","Full Description":"General Purpose spiral point tap series that provides exceptional value for all general threading applications.","Feature 3":"TiN, TiCN coating","Web Literature 1":"8002024CA-TP,367","Notes":"Other coatings are available upon request.","Meets 3B Class of Fit":"No","Thread Size - Inch":["1/16","1/8","1/4","3/8","1/2","3/4","1","1-1/4","1-1/2","2"],"Units":"Inch","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":["BRIGHT","Steam Oxide","TiN","TiCN"],"Product Overview":"NPT, ANPT","Thread Type":"NPT, ANPT","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","STI Thread":"No","Thread Size - Metric":"-","Thread Size - Number":"-","Pitch":"-","Alloy Steels : 4140; 4340":"-","Chamfer Length - Inch":"-","Chamfer Type":"-","Class of Fit":"-","Cobalt-Chrome":"-","Copper Alloys":"-","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"-","Cutting Speed (SFM) - Cobalt-Chrome":"-","Cutting Speed (SFM) - Copper Alloys":"-","Cutting Speed (SFM) - Die Steels":"-","Cutting Speed (SFM) - Fiberglass":"-","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"-","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"-","Cutting Speed (SFM) - Hardened Steels : 45-50 HRC":"-","Cutting Speed (SFM) - Hardened Steels : 50-70 HRC":"-","Cutting Speed (SFM) - MMC (Metal Matrix Composites)":"-","Cutting Speed (SFM) - Nickel Alloy : Inconel":"-","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"-","Cutting Speed (SFM) - Stainless Steels : 300":"-","Cutting Speed (SFM) - Stainless Steels : 400":"-","Cutting Speed (SFM) - Thermo Plastics":"-","Cutting Speed (SFM) - Thermosetting Plastics":"-","Cutting Speed (SFM) -Titanium : 6AL4V (30HRC)":"-","Die Steels":"-","Fiberglass":"-","Hardened Steels : 35 HRC":"-","Hardened Steels : 35-45 HRC":"-","Hardened Steels : 45-50 HRC":"-","Hardened Steels : 50-70 HRC":"-","Helix Direction":"-","Major Diameter - Metric":"-","MMC (Metal Matrix Composites)":"-","Neck Diameter - Inch (d1)":"-","Neck Diameter - Metric (d1)":"-","Neck Length - Metric (L1)":"-","Nickel Alloy : Inconel":"-","Overall Length - Metric (L)":"-","Projection - Inch (P)":"-","Shank Diameter - Metric (d)":"-","Short Description":"-","Square Length - Metric (Ik)":"-","Square Width - Metric (k)":"-","Stainless Steels : 17-4PH":"-","Stainless Steels : 300":"-","Stainless Steels : 400":"-","Tap Drill Size Max - Inch":"-","Tap Drill Size Max - Metric":"-","Tap Drill Size Min - Metric":"-","Thermo Plastics":"-","Thermosetting Plastics":"-","Thread Length - Metric (Lc)":"-","Thread Limit":"-","Titanium : 6AL4V (30HRC)":"-","Web Literature 2":"-","Web Literature 3":"-","Web Video 1":"-","Web Video 2":"-","Web Video 3":"-","View Speed and Feed Page":"-","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.925\" - 1.318\"","Taper-Sizes":"-","Overall-Sizes":"2.125984\" - 4.5\"","Shank-Sizes":"0.3125\" - 1.875\"","Friendly Name":"108","CategoryBrand":"OSG"}
108AL

108AL

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20108AL/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_108AL_-_Pipe_Taps_-_Catalog"],"Number of Flutes":["4","5"],"Major Diameter - Inch":["0.125","0.25","0.375","0.75","1","0.5"],"Threads Per Inch":["27","18","14","11.5"],"Neck Length - Inch (L1)":["0.988","1.319"],"Tap Drill Size Min - Inch":["0.332","0.4375","0.5625","0.90625","1.140625","0.703125"],"Square Length - Inch (Ik)":["0.375","0.4375","0.5","0.6875","0.8125","0.625"],"Overall Length - Inch (L)":["2.126","2.437","2.563","3.252","3.752","3.126"],"Thread Length - Inch (Lc)":["0.752","1.063","1.374","1.752"],"Shank Diameter - Inch (d)":["0.4375","0.5625","0.7","0.9063","1.125","0.6875"],"Square Width - Inch (k)":["0.328","0.421","0.531","0.679","0.843","0.515"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Benefit 2":"For standard NPT tapered pipe applications","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : 6061; 7075":"15-40","Cutting Speed (SFM) - Aluminum : Casting":"20-35","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 2":"NPT","List Name":"GENERAL PURPOSE-NPT","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Meets 2B Class of Fit":"No","Full Description":"General Purpose pipe tap for Alloy and Cast Aluminum that provides exceptional value.","Web Literature 1":"8002024CA-TP,368","Notes":"Other coatings are available upon request.","Meets 3B Class of Fit":"No","Units":"Inch","Thread Size - Inch":["1/8","1/4","3/8","3/4","1","1/2"],"Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":"BRIGHT","Thread Type":"NPT","Product Overview":"NPT, ANPT","Substrate":"HSS","STI Thread":"No","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.988\" - 1.319\"","Taper-Sizes":"-","Overall-Sizes":"2.126\" - 3.752\"","Shank-Sizes":"0.4375\" - 1.125\"","Friendly Name":"108AL","CategoryBrand":"OSG"}
108G

108G

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20108G/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_108G_-_Pipe_Taps_-_Catalog"],"Friendly Name":"108G"}
109

109

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20109/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_109_-_Pipe_Taps_-_Catalog"],"Number of Flutes":["4","5"],"Major Diameter - Inch":["0.125","0.25","0.375","0.5","0.75","1"],"Threads Per Inch":["27","18","14","11.5"],"Neck Length - Inch (L1)":["0.949","1.26"],"Tap Drill Size Min - Inch":["0.34375","0.4375","0.578125","0.71875","0.921875","1.15625","0.444"],"Square Length - Inch (Ik)":["0.375","0.4375","0.5","0.625","0.6875","0.8125"],"Overall Length - Inch (L)":["2.126","2.437","2.563","3.126","3.252","3.752"],"Thread Length - Inch (Lc)":["0.752","1.063","1.374","1.752"],"Shank Diameter - Inch (d)":["0.4375","0.3125","0.5625","0.7","0.6875","0.9063","1.125"],"Square Width - Inch (k)":["0.328","0.234","0.421","0.531","0.515","0.679","0.843"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Benefit 2":"S/O increases mechanical lubricity","Benefit 3":"For standard and dry seal straight pipe thread applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : 6061; 7075":"15-40","Cutting Speed (SFM) - Aluminum : Casting":"20-35","Cutting Speed (SFM) - High Carbon Steel : 1065":"10-20","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"10-25","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 3":"NPS & NPSF","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"15-40","Cutting Speed (SFM) - Cast Iron":"15-50","List Name":"GENERAL PURPOSE-NPS/NPSF","Low Carbon Steel : 1010; 1018":"P; Good","Interrupted Thread":"No","Feature 2":"Bright or Steam Oxide surface treatment","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Meets 2B Class of Fit":"No","Full Description":"General Purpose parallel thread pipe taps provide exceptional value.","Web Literature 1":"8002024CA-TP,375","Notes":"Other coatings are available upon request.","Meets 3B Class of Fit":"No","Units":"Inch","Thread Size - Inch":["1/8","1/4","3/8","1/2","3/4","1"],"Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":["BRIGHT","Steam Oxide"],"Thread Type":["NPS","NPSF"],"Product Overview":"NPS, NPSF","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","STI Thread":"No","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.949\" - 1.26\"","Taper-Sizes":"-","Overall-Sizes":"2.126\" - 3.752\"","Shank-Sizes":"0.3125\" - 1.125\"","Friendly Name":"109","CategoryBrand":"OSG"}
11051

11051

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2011051/Taps_-_Tap_-_EXOTAP_VCX_-_List_11051_-_Straight_Fluted_Taps_-_Catalog"],"Friendly Name":"11051"}
11052

11052

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2011052/Taps_-_Tap_-_EXOTAP_DC_-_List_11052_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4","5"],"Square Width - Metric (k)":["4.8514","6.0452","7.2644","6.985","8.1788","9.144","10.3124","12.4206","13.2842","14.478"],"Chamfer Length - Inch":["0.059055","0.073818","0.088582","0.103346","0.11811","0.147637","0.177165"],"Major Diameter - Metric":["6","8","10","12","14","16","18","20","22","24"],"Tap Drill Size Max - Metric":["5.153","6.912","9.153","8.912","8.676","10.912","10.676","10.441","12.676","12.21","14.676","14.21","16.676","16.21","15.744","18.676","18.21","17.744","20.676","20.21","19.744","22.676","22.21","21.252"],"Overall Length - Metric (L)":["80","90","100","110","125","140","160"],"Shank Diameter - Metric (d)":["6.477","8.0772","9.6774","9.3218","10.8966","12.192","13.7668","16.5608","17.7038","19.304"],"Pitch":["1","1.25","1.5","1.75","2","2.5","3"],"Neck Length - Metric (L1)":["30","35","39","49.1","50.1","54","55","61.8","67.4","68.4"],"Tap Drill Size Min - Metric":["4.917","6.647","8.917","8.647","8.376","10.647","10.376","10.106","12.376","11.835","14.376","13.835","16.376","15.835","15.294","18.376","17.835","17.294","20.376","19.835","19.294","22.376","21.835","20.752"],"Square Length - Metric (Ik)":["7.9375","9.525","11.1125","12.7","14.2875","15.875","17.4625","19.05"],"Thread Length - Metric (Lc)":["12","15","18","21","24","30","36"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC VP-DC-HT","Interrupted Thread":"No","Feature 4":"Available DIN or ANSI overall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Meets 2B Class of Fit":["No","Yes"],"Web Literature 1":"8002024CA-TP,271","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Meets 3B Class of Fit":["No","Yes"],"Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Web Literature 4":"800389CA","Thread Type":["M","MF"],"Product Overview":"CPM, DIN Overall Length, V-Coating","Thread Limit":["D5","D6","D7","D8"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M6","M8","M10","M12","M14","M16","M18","M20","M22","M24"],"Units":"Metric","STI Thread":"No","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 68.4mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 160mm","Shank-Sizes":"6.477mm - 19.304mm","Friendly Name":"11052","CategoryBrand":"EXOTAP"}
11053

11053

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2011053/Taps_-_Tap_-_EXOTAP_DC-OIL_-_List_11053_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4","5"],"Square Width - Metric (k)":["4.8514","6.0452","7.2644","6.985","8.1788","9.144","10.3124","12.4206","13.2842","14.478"],"Chamfer Length - Inch":["0.059055","0.073818","0.088582","0.103346","0.11811","0.147637","0.177165"],"Major Diameter - Metric":["6","8","10","12","14","16","18","20","22","24"],"Tap Drill Size Max - Metric":["5.153","6.912","8.912","8.676","10.676","10.441","12.676","12.21","14.676","14.21","16.676","16.21","15.744","18.676","18.21","17.744","20.676","20.21","19.744","22.676","22.21","21.252","10.912"],"Overall Length - Metric (L)":["80","90","100","110","125","140","160"],"Shank Diameter - Metric (d)":["6.477","8.0772","9.6774","9.3218","10.8966","12.192","13.7668","16.5608","17.7038","19.304"],"Pitch":["1","1.25","1.5","1.75","2","2.5","3"],"Neck Length - Metric (L1)":["30","35","39","49.1","50.1","54","55","61.8","67.4","68.4"],"Tap Drill Size Min - Metric":["4.917","6.647","8.647","8.376","10.376","10.106","12.376","11.835","14.376","13.835","16.376","15.835","15.294","18.376","17.835","17.294","20.376","19.835","19.294","22.376","21.835","20.752","10.647"],"Square Length - Metric (Ik)":["7.9375","9.525","11.1125","12.7","14.2875","15.875","17.4625","19.05"],"Thread Length - Metric (Lc)":["12","15","18","21","24","30","36"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"Yes","Cutting Speed (SFM) - Aluminum : Casting":"50-110","Helix Angle - Degree":"0","Cutting Speed (SFM) - Cast Iron":"40-100","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC-OIL VPO-DC-HT","Interrupted Thread":"No","Feature 4":"Available DIN or ANSI overall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Meets 2B Class of Fit":["No","Yes"],"Web Literature 1":"8002024CA-TP,273","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Meets 3B Class of Fit":["No","Yes"],"Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Web Literature 4":"800389CA","Thread Type":["M","MF"],"Product Overview":"CPM, Coolant Thru, DIN Overall Length, V-Coating","Thread Limit":["D5","D6","D7","D8"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M6","M8","M10","M12","M14","M16","M18","M20","M22","M24"],"Units":"Metric","STI Thread":"No","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 68.4mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 160mm","Shank-Sizes":"6.477mm - 19.304mm","Friendly Name":"11053","CategoryBrand":"EXOTAP"}
11054

11054

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2011054/Taps_-_Tap_-_EXOTAP_DC_-_List_11054_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4"],"Chamfer Length - Inch":["0.059055","0.073818","0.088582"],"Square Width - Metric (k)":["4.9","6.2","8"],"Major Diameter - Metric":["6","8","10"],"Tap Drill Size Max - Metric":["5.153","6.912","8.676"],"Shank Diameter - Metric (d)":["6","8","10"],"Overall Length - Metric (L)":["80","90","100"],"Pitch":["1","1.25","1.5"],"Neck Length - Metric (L1)":["30","35","39"],"Tap Drill Size Min - Metric":["4.917","6.647","8.376"],"Square Length - Metric (Ik)":["8","9","11"],"Thread Length - Metric (Lc)":["12","15","18"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC VP-DC-HT","Interrupted Thread":"No","Feature 4":"Available DIN or ANSI overall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,274","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Meets 3B Class of Fit":"No","Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Web Literature 4":"800389CA","Thread Type":"M","Product Overview":"CPM, DIN Overall Length, DIN Shank, V-Coating","Thread Limit":["D5","D6"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M6","M8","M10"],"Units":"Metric","STI Thread":"No","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 39mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 100mm","Shank-Sizes":"6mm - 10mm","Friendly Name":"11054","CategoryBrand":"EXOTAP"}
11055

11055

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2011055/Taps_-_Tap_-_EXOTAP_DC-OIL_-_List_11055_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4"],"Chamfer Length - Inch":["0.059055","0.073818","0.088582","0.103346"],"Square Width - Metric (k)":["4.9","6.2","8","7"],"Major Diameter - Metric":["6","8","10","12"],"Tap Drill Size Max - Metric":["5.153","6.912","8.676","10.441"],"Shank Diameter - Metric (d)":["6","8","10","9"],"Overall Length - Metric (L)":["80","90","100","110"],"Pitch":["1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["30","34.9","38.9","43.9"],"Tap Drill Size Min - Metric":["4.917","6.647","8.376","10.106"],"Square Length - Metric (Ik)":["8","9","11","10"],"Thread Length - Metric (Lc)":["12","14","17","20"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"Yes","Cutting Speed (SFM) - Aluminum : Casting":"50-110","Helix Angle - Degree":"0","Cutting Speed (SFM) - Cast Iron":"40-100","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC-OIL VPO-DC-HT","Interrupted Thread":"No","Feature 4":"Available DIN or ANSI overall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,275","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Meets 3B Class of Fit":"No","Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Web Literature 4":"800389CA","Thread Type":"M","Product Overview":"CPM, Coolant Thru, DIN Overall Length, DIN Shank, V-Coating","Thread Limit":["D5","D6"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M6","M8","M10","M12"],"Units":"Metric","STI Thread":"No","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30mm - 43.9mm","Taper-Sizes":"-","Overall-Sizes":"80mm - 110mm","Shank-Sizes":"6mm - 10mm","Friendly Name":"11055","CategoryBrand":"EXOTAP"}
11056

11056

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2011056/Taps_-_Tap_-_EXOTAP_DC_-_List_11056_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4","5"],"Square Width - Metric (k)":["4.8514","6.0452","7.2644","6.985","8.1788"],"Chamfer Length - Inch":["0.059055","0.073818","0.088582","0.103346","0.11811"],"Major Diameter - Metric":["6","8","10","12","14"],"Overall Length - Metric (L)":["63.5","69.1","74.6","85.7","91.3"],"Tap Drill Size Max - Metric":["5.153","6.912","9.153","8.912","8.676","10.912","10.676","10.441","12.676","12.21"],"Shank Diameter - Metric (d)":["6.477","8.0772","9.6774","9.3218","10.8966"],"Pitch":["1","1.25","1.5","1.75","2"],"Neck Length - Metric (L1)":["25.4","28.6","31.8","49.1","50.1"],"Tap Drill Size Min - Metric":["4.917","6.647","8.917","8.647","8.376","10.647","10.376","10.106","12.376","11.835"],"Square Length - Metric (Ik)":["7.9375","9.525","11.1125","12.7"],"Thread Length - Metric (Lc)":["12","15","18","21","24"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC VP-DC-HT","Interrupted Thread":"No","Feature 4":"Available DIN or ANSI overall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,277","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Meets 3B Class of Fit":"No","Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Web Literature 4":"800389CA","Thread Type":["M","MF"],"Product Overview":"CPM,V-Coating","Thread Limit":["D5","D6","D7"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M6","M8","M10","M12","M14"],"Units":"Metric","STI Thread":"No","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"25.4mm - 50.1mm","Taper-Sizes":"-","Overall-Sizes":"63.5mm - 91.3mm","Shank-Sizes":"6.477mm - 10.8966mm","Friendly Name":"11056","CategoryBrand":"EXOTAP"}
11057

11057

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2011057/Taps_-_Tap_-_EXOTAP_DC-OIL_-_List_11057_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4","5"],"Square Width - Metric (k)":["4.8514","6.0452","7.2644","6.985","8.1788"],"Chamfer Length - Inch":["0.059055","0.073818","0.088582","0.103346","0.11811"],"Major Diameter - Metric":["6","8","10","12","14"],"Overall Length - Metric (L)":["63.5","69.1","74.6","85.7","91.3"],"Tap Drill Size Max - Metric":["5.153","6.912","8.912","8.676","10.676","10.441","12.676","12.21"],"Shank Diameter - Metric (d)":["6.477","8.0772","9.6774","9.3218","10.8966"],"Pitch":["1","1.25","1.5","1.75","2"],"Neck Length - Metric (L1)":["25.4","28.6","31.8","49.1","50.1"],"Tap Drill Size Min - Metric":["4.917","6.647","8.647","8.376","10.376","10.106","12.376","11.835"],"Square Length - Metric (Ik)":["7.9375","9.525","11.1125","12.7"],"Thread Length - Metric (Lc)":["12","15","18","21","24"],"View Catalog Page":"Here","Cast Iron":"K; Best","Benefit 4":"Absolute versatility for any machining operation in Ductile Iron.","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Reduces friction during cutting, thereby minimizing heat generation and extending life.","Benefit 2":"Most rigid cut tap design, suitable for both through and blind holes.","Aluminum : Casting":"N; Best","Benefit 3":"The layered configuration resists thermal cracking while increasing surface hardness to extend life up to 3X vs monolayered TiCN.","Coolant Thru":"Yes","Cutting Speed (SFM) - Aluminum : Casting":"50-110","Helix Angle - Degree":"0","Cutting Speed (SFM) - Cast Iron":"40-100","Cutting Direction":"RH","Feature 3":"Multi-layered TiCN (V) coating from OSG","List Name":"DC-OIL VPO-DC-HT","Interrupted Thread":"No","Feature 4":"Available DIN or ANSI overall lengths, coolant-through or solid, metric and inch, up to 1\" or M24.","Feature 1":"Eccentic thread relief","Feature 2":"Straight flute design","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,279","Full Description":"The EXOTAP-DC taps are the industry leading tap for processing threads in Cast Iron, Ductile Iron and Cast Aluminum. The combination of ultra-strong rake with our VC10 powdered metal substrate makes this tap the absolute best soltion for threading ductile castings.","Meets 3B Class of Fit":"No","Web Literature 2":"800251CA-V2","Product Category":"Straight Flute","Web Literature 4":"800389CA","Thread Type":["M","MF"],"Product Overview":"CPM,Coolant Thru, V-Coating","Thread Limit":["D5","D6","D7"],"Short Description":"Premium Design for Cast Iron and Cast Aluminum","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M6","M8","M10","M12","M14"],"Units":"Metric","STI Thread":"No","Surface Treatment":"V","Substrate":"VC-10","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"25.4mm - 50.1mm","Taper-Sizes":"-","Overall-Sizes":"63.5mm - 91.3mm","Shank-Sizes":"6.477mm - 10.8966mm","Friendly Name":"11057","CategoryBrand":"EXOTAP"}
114

114

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20114/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_114_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4"],"Major Diameter - Inch":["0.086","0.112","0.138","0.164","0.19","0.25"],"Chamfer Length - Inch":["0.071428","0.026785","0.1","0.0375","0.125","0.046875","0.166666","0.0625","0.2","0.075"],"Tap Drill Size Max - Inch":["0.0737","0.0939","0.114","0.139","0.156","0.164","0.207"],"Threads Per Inch":["56","40","32","24","20"],"Tap Drill Size Min - Inch":["0.0667","0.0849","0.104","0.13","0.145","0.156","0.196"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255"],"Overall Length - Inch (L)":["1.751968","1.874015","2","2.125984","2.374015","2.5"],"Thread Length - Inch (Lc)":["0.437007","0.295275","0.362204","0.370078","0.374015","0.492125","0.594488"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191"],"View Catalog Page":"Here","Coolant Thru":"No","Chamfer Type":["Plug (4P)","Bottom (1.5P)"],"Cutting Speed (SFM) - Thermo Plastics":"33-66","Cutting Speed (SFM) - Thermosetting Plastics":"33-66","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Interrupted Thread":"No","Full Description":"TAPS FOR PLASTIC Straight Flute Hand Taps for Plastics","Web Literature 1":"8002024CA-TP,316","Meets 2B Class of Fit":["No","Yes"],"Meets 3B Class of Fit":["No","Yes"],"Web Literature 4":"800389CA","Product Category":"Straight Flute","Notes":"The 2B+ are designed for tapping thermosetting, reinforced plastics and laminated plastics such as epoxy, bakelite, fiberglass, etc. The 2B+ limit is based on the actual products limit and machining properties, taking the guess work out of H limit selection. Oversize 2B+ Series = +.0005\" ~.001\" over 2B thread limit.","Units":"Inch","Short Description":"Designed for Plastic","STI Thread":"No","Thread Size - Number":["No. 2","No. 4","No. 6","No. 8","No. 10"],"Thermo Plastics":"Other; Best","Thermosetting Plastics":"Other; Best","Thread Limit":"H7","Substrate":"HSS-CO","Product Overview":"HSS-Co, Nitride Coated","Thread Type":["UNC","UNF"],"Surface Treatment":"Nitride","Class of Fit":"2B+","Neck Length - Inch (L1)":["0.559055","0.685039","0.751968","0.866141","0.996062"],"Thread Size - Inch":"1/4","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.559055\" - 0.996062\"","Taper-Sizes":"-","Overall-Sizes":"1.751968\" - 2.5\"","Shank-Sizes":"0.141\" - 0.255\"","Friendly Name":"114","CategoryBrand":"OSG"}
118

118

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20118/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_118_-_Pipe_Taps_-_Catalog"],"Number of Flutes":["4","5","7"],"Major Diameter - Inch":["0.0625","0.125","0.25","0.375","0.5","0.75","1","1.25","1.5","2"],"Threads Per Inch":["27","18","14","11.5"],"Neck Length - Inch (L1)":["0.885","0.948","1.279"],"Tap Drill Size Min - Inch":["0.242","0.332","0.4375","0.5625","0.703125","0.90625","1.140625","1.484375","1.71875","2.1875"],"Square Length - Inch (Ik)":["0.375","0.4375","0.5","0.625","0.6875","0.8125","0.9375","1","1.125"],"Shank Diameter - Inch (d)":["0.3125","0.4375","0.5625","0.7","0.6875","0.9063","1.125","1.3125","1.5","1.875"],"Overall Length - Inch (L)":["2.125984","2.437007","2.562992","3.125984","3.251968","3.751968","4","4.251968","4.5"],"Thread Length - Inch (Lc)":["0.688","0.751","1.062","1.374","1.751"],"Square Width - Inch (k)":["0.234","0.328","0.421","0.531","0.515","0.679","0.843","0.984","1.125","1.406"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Benefit 2":"S/O increases mechanical lubricity","Benefit 4":"For standard or dry seal tapered pipe thread applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Benefit 3":"Improves wear resistance for extended tap life","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : 6061; 7075":"15-40","Cutting Speed (SFM) - Aluminum : Casting":"20-35","Cutting Speed (SFM) - High Carbon Steel : 1065":"10-20","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"10-25","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"15-40","Feature 4":"NPTF","Cutting Speed (SFM) - Cast Iron":"15-50","List Name":"GENERAL PURPOSE-NPTF","Low Carbon Steel : 1010; 1018":"P; Good","Interrupted Thread":"No","Feature 2":"Bright or Steam Oxide surface treatment","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Meets 2B Class of Fit":"No","Feature 3":"TiN, TiCN coating","Web Literature 1":"8002024CA-TP,369","Notes":"Other coatings are available upon request.","Meets 3B Class of Fit":"No","Full Description":"General Purpose taper pipe tap designed for Aluminum that provides exceptional value.","Thread Size - Inch":["1/16","1/8","1/4","3/8","1/2","3/4","1","1-1/4","1-1/2","2"],"Units":"Inch","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":["BRIGHT","Steam Oxide","TiN","TiCN"],"Product Overview":"NPTF","Thread Type":"NPTF","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","STI Thread":"No","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.885\" - 1.279\"","Taper-Sizes":"-","Overall-Sizes":"2.125984\" - 4.5\"","Shank-Sizes":"0.3125\" - 1.875\"","Friendly Name":"118","CategoryBrand":"OSG"}
12006

12006

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2012006/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_12006_-_Pipe_Taps_-_Catalog"],"Number of Flutes":["4","5"],"Major Diameter - Inch":["0.125","0.25","0.375","0.5","0.75"],"Threads Per Inch":["27","18","14"],"Neck Length - Inch (L1)":["0.988","1.319"],"Tap Drill Size Min - Inch":["0.332","0.4375","0.5625","0.703125","0.90625"],"Projection - Inch (P)":["0.204","0.306","0.393","0.167","0.251","0.322"],"Square Length - Inch (Ik)":["0.375","0.4375","0.5","0.625","0.6875"],"Overall Length - Inch (L)":["2.126","2.437","2.563","3.126","3.252"],"Thread Length - Inch (Lc)":["0.752","1.063","1.374"],"Shank Diameter - Inch (d)":["0.4375","0.5625","0.7","0.6875","0.9063"],"Square Width - Inch (k)":["0.328","0.421","0.531","0.515","0.679"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Benefit 2":"S/O increases mechanical lubricity","Benefit 4":"For standard and dry seal tapered pipe thread applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Benefit 3":"Improves wear resistance for extended tap life","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : 6061; 7075":"15-40","Cutting Speed (SFM) - Aluminum : Casting":"20-35","Cutting Speed (SFM) - High Carbon Steel : 1065":"10-20","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"10-25","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"15-40","Feature 4":"NPT & NPTF","Cutting Speed (SFM) - Cast Iron":"15-50","List Name":"GENERAL PURPOSE-NPTF SHORT PROJECTION","Low Carbon Steel : 1010; 1018":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 2":"Bright, Steam Oxide surface treatment","Medium Carbon Steel : 1035; 1045":"P; Good","Meets 2B Class of Fit":"No","Full Description":"General Purpose spiral point tap series that provides exceptional value for all general threading applications.","Feature 3":"TiN, TiCN coating","Web Literature 1":"8002024CA-TP,373","Meets 3B Class of Fit":"No","Thread Size - Inch":["1/8","1/4","3/8","1/2","3/4"],"Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":"BRIGHT","Thread Type":"NPTF","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Product Overview":"Special Short Protection, NPTF","STI Thread":"No","Units":"Inch","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.988\" - 1.319\"","Taper-Sizes":"-","Overall-Sizes":"2.126\" - 3.252\"","Shank-Sizes":"0.4375\" - 0.9063\"","Friendly Name":"12006","CategoryBrand":"OSG"}
121

121

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20121/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_121_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["4","3"],"Chamfer Length - Inch":["0.246062","0.073818","0.708661","0.3937","0.11811","0.295275","0.088582","0.19685","0.492125","0.147637","0.590551","0.177165","0.531496","1.240157","0.688976","0.206692","0.098425","0.029527","0.137795","0.041338","0.15748","0.047244","0.059055","0.344488","0.103346","0.07874","0.023622","0.026574","0.212598","0.035433","0.248031","0.283464","0.35433","0.265748","0.044291","0.442913","0.620078"],"Major Diameter - Metric":["14","16","18","20","22","24","26","28","30","32","33","34","36","3","4","5","6","8","10","12","2","2.3","2.6","3.5","4.5","7","9","11"],"Square Width - Metric (k)":["8","10","11","12","13","15","17","19","21","3.2","4","4.5","5","5.5","6.5","2.5","6"],"Shank Diameter - Metric (d)":["10.5","12.5","14","15","17","19","20","21","23","24","25","26","28","4","5","5.5","6","6.2","7","8.5","3","8"],"Tap Drill Size Max - Metric":["12.912","14.21","14.676","15.153","15.744","16.21","16.676","17.744","18.676","19.744","20.676","21.252","22.676","23.252","24.676","26.676","26.771","28.676","30.676","31.676","32.676","34.676","2.599","3.422","4.334","5.153","6.912","8.676","8.912","10.441","1.679","1.979","2.238","3.01","3.876","5.377","6.152","7.153","7.377","7.912","9.153","9.676","10.676","10.912","11.153","12.21","12.676"],"Overall Length - Metric (L)":["88","95","100","105","115","120","130","135","110","46","52","60","62","70","75","82","40","42","44","48","55","65","72","80"],"Pitch":["1.25","2","1.5","1","2.5","3","3.5","0.5","0.7","0.8","1.75","0.4","0.45","0.6","0.75"],"Neck Length - Metric (L1)":["48","52","50","55","58","63","66","71","60","74","47","19","21","24","29","37","41","12","20","33","35","38"],"Tap Drill Size Min - Metric":["12.647","13.835","14.376","14.917","15.294","15.835","16.376","17.294","18.376","19.294","20.376","20.752","22.376","22.752","24.376","26.376","26.211","28.376","30.376","31.376","32.376","34.376","2.459","3.242","4.134","4.917","6.647","8.376","8.647","10.106","1.567","1.867","2.113","2.85","3.688","5.187","5.918","6.917","7.187","7.647","8.917","9.376","10.376","10.647","10.917","11.835","12.376"],"Square Length - Metric (Ik)":["11","13","14","15","16","18","20","22","24","6","7","8","9","5"],"Thread Length - Metric (Lc)":["30","32","37","38","45","51","11","13","16","19","22","24","29","8","9","20","25"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":["Plug (5P)","Bottom (1.5P)","Taper (9P)"],"Benefit 3":"S/O increases mechanical lubricity","Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Benefit 4":"Improves wear resistance for extended tap life","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Interrupted Thread":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Feature 2":"Straight Flute","Meets 2B Class of Fit":"No","Web Literature 1":["8002024CA-TP,312","8002024CA-TP,313","8002024CA-TP,311"],"Notes":"Other coatings are available upon request.","Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Meets 3B Class of Fit":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Product Overview":"JIS Dimensions","Surface Treatment":["BRIGHT","Steam Oxide"],"Thread Limit":"OH2","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Meets 6H Class of Fit":"Yes","Low Carbon Steel : 1010; 1018":"P; Good","Thread Size - Metric":["M14","M16","M18","M20","M22","M24","M26","M28","M30","M32","M33","M34","M36","M3","M4","M5","M6","M8","M10","M12","M2","M2.3","M2.6","M3.5","M4.5","m7","M9","M11"],"Units":"Metric","Thread Type":["MF","M"],"STI Thread":"No","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"12mm - 74mm","Taper-Sizes":"-","Overall-Sizes":"40mm - 135mm","Shank-Sizes":"3mm - 28mm","Friendly Name":"121","CategoryBrand":"OSG"}
126

126

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20126/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_126_-_Screw_Thread_Insert_Taps_-_Catalog"],"Major Diameter - Inch":["0.112","0.164","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1","0.19","0.25","0.138","0.086","0.099","0.125"],"Number of Flutes":["3","4"],"Chamfer Length - Inch":["0.083333","0.03125","0.111111","0.041666","0.166666","0.0625","0.25","0.09375","0.2","0.075","0.307692","0.115384","0.333333","0.125","0.222222","0.363636","0.136363","0.4","0.15","0.444444","0.285714","0.107142","0.5","0.1875","0.1","0.0375","0.046875","0.142857","0.053571","0.071428","0.026785"],"Tap Drill Size Max - Inch":["0.1229","0.1771","0.3288","0.3987","0.4561","0.5273","0.5186","0.5918","0.6451","0.6564","0.7838","0.772","0.9119","0.8994","1.0421","1.0281","0.1252","0.2","0.2041","0.2646","0.1527","0.1781","0.2704","0.3342","0.4639","0.0961","0.1104","0.1373","0.1503","0.391"],"Threads Per Inch":["48","36","24","16","20","13","12","18","11","10","9","14","8","40","32","28","56"],"Neck Length - Inch (L1)":["0.803","1.204","1.114","1.413","1.811","2","1.94","2.165","2.125","2.433","2.653","3.011","3.074","1.291","1.185","1.322","1.055","0.696","0.748","0.933","1.003","1.011","0.937","1.688"],"Tap Drill Size Min - Inch":["0.1166","0.1701","0.3215","0.3885","0.4483","0.5166","0.5108","0.5806","0.637","0.6447","0.7716","0.7635","0.899","0.8905","1.0271","1.0181","0.1175","0.199","0.1968","0.2577","0.1448","0.1708","0.2608","0.3245","0.453","0.0899","0.1036","0.1305","0.1435","0.384"],"Square Length - Inch (Ik)":["0.1875","0.28125","0.4375","0.5625","0.5","0.625","0.6875","0.75","0.8125","1","0.875","0.3125","0.375","0.25","0.40625"],"Shank Diameter - Inch (d)":["0.141","0.22","0.381","0.367","0.48","0.429","0.542","0.59","0.697","0.652","0.8","1.021","0.896","0.255","0.318","0.194","0.168","0.323"],"Thread Length - Inch (Lc)":["0.374","0.559","0.468","0.834","0.937","1.07","1.153","1.165","1.271","1.401","1.555","1.751","0.732","0.625","0.751","0.476","0.279","0.314","0.444","0.547","0.472"],"Overall Length - Inch (L)":["2.059055","2.555118","2.464566","2.937","3.374","3.811","3.594","4.031","4.252","4.689","4.469","5.126","5.752","5.437","2","2.602362","2.496062","2.72","2.381889","1.885826","1.940944","2.19685","2.267716","2.27559","2.200787","2.574803","3.157"],"Square Width - Inch (k)":["0.11","0.165","0.286","0.275","0.36","0.322","0.406","0.442","0.523","0.489","0.6","0.766","0.672","0.191","0.238","0.152","0.131","0.242"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":["Plug (4P)","Bottom (1.5P)"],"Benefit 4":"Repair stripped threaded holes","Benefit 3":"Complete Offering","Aluminum : 6061; 7075":"N; Good","Benefit 2":"For through or blind holes and short chipping materials","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 3":"Inch & Metric","List Name":"GENERAL PURPOSE-HT STI","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Low Carbon Steel : 1010; 1018":"P; Good","Feature 4":"Screw Thread Insert (STI) tap","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Feature 2":"Straight Flute","Web Literature 1":["8002024CA-TP,353","8002024CA-TP,354","8002024CA-TP,355"],"Notes":"Other coatings are available upon request.","Full Description":"General Purpose tap series provides exceptional value for tapping helicoil (STI) threads in a variety of ferrous and nonferrous metals.","Units":"Inch","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":"BRIGHT","Meets 2B Class of Fit":["Yes","No"],"Thread Size - Number":["No. 4","No. 8","No. 10","No. 6","No. 2","No. 3","No. 5"],"Thread Limit":["H2","h4","H3","H5","h6","H1"],"Meets 3B Class of Fit":["Yes","No"],"High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Product Overview":"Screw Thread Insert (STI)","Thread Type":["UNF STI","UNC STI"],"STI Thread":"Yes","Thread Size - Inch":["5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8","1","1/4"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.696\" - 3.074\"","Taper-Sizes":"-","Overall-Sizes":"1.885826\" - 5.752\"","Shank-Sizes":"0.141\" - 1.021\"","Friendly Name":"126","CategoryBrand":"OSG"}
128

128

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20128/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_128_-_Screw_Thread_Insert_Taps_-_Catalog"],"Number of Flutes":["2","3","4"],"Square Width - Metric (k)":["2.794","3.8608","4.8514","6.0452","7.2644","6.985","8.1788","10.3124","11.2268","13.2842","14.478","15.24","17.0688"],"Chamfer Length - Inch":["0.03937","0.044291","0.049212","0.068897","0.07874","0.098425","0.123031","0.147637","0.172244","0.19685","0.246062","0.295275"],"Major Diameter - Metric":["2","2.5","3","4","5","6","8","10","12","14","16","18","20","22","24"],"Overall Length - Metric (L)":["47.8","49.3","50.8","60.5","63.5","69.1","74.7","85.9","91.2","102.4","108","119.1","124.6","130.2","138.1"],"Shank Diameter - Metric (d)":["3.5814","4.9276","6.477","8.0772","9.6774","9.3218","10.8966","13.7668","14.986","17.7038","19.304","20.32","22.7584"],"Tap Drill Size Max - Metric":["2.199","2.722","3.248","4.332","5.374","6.407","8.483","10.56","12.644","14.733","16.733","18.896","20.896","22.896","25.049"],"Pitch":["0.4","0.45","0.5","0.7","0.8","1","1.25","1.5","1.75","2","2.5","3"],"Neck Length - Metric (L1)":["14","16.3","17.6","22.7","25.5","28.6","31.8","49.1","50.1","55","61.8","67.4","68.4","76.5","79.1"],"Tap Drill Size Min - Metric":["2.087","2.597","3.108","4.152","5.174","6.217","8.271","10.324","12.379","14.433","16.433","18.541","20.541","22.541","24.649"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125","12.7","15.875","17.4625","19.05","20.6375","22.225"],"Thread Length - Metric (Lc)":["13","6.7","7.1","10.3","11.3","14","17.5","21","24.5","28","35","42"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":"Modified Bottom (2.5P)","Benefit 4":"Repair stripped threaded holes","Benefit 3":"Complete Offering","Aluminum : 6061; 7075":"N; Good","Benefit 2":"For through or blind holes and short chipping materials","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","Feature 3":"Inch & Metric","List Name":"GENERAL PURPOSE-HT STI","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Low Carbon Steel : 1010; 1018":"P; Good","Feature 4":"Screw Thread Insert (STI) tap","Interrupted Thread":"No","Meets 6H Class of Fit":["No","Yes"],"Medium Carbon Steel : 1035; 1045":"P; Good","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Feature 2":"Straight Flute","Web Literature 1":"8002024CA-TP,356","Notes":"Other coatings are available upon request.","Full Description":"General Purpose tap series provides exceptional value for tapping helicoil (STI) threads in a variety of ferrous and nonferrous metals.","Product Category":"Straight Flute","Meets 4H Class of Fit":["No","Yes"],"Web Literature 4":"800389CA","Surface Treatment":"BRIGHT","Thread Type":"M STI","Meets 2B Class of Fit":["Yes","No"],"Thread Limit":["D2","D3","D4","D5","D6"],"Meets 3B Class of Fit":["Yes","No"],"High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Product Overview":"Screw Thread Insert (STI)","Thread Size - Metric":["M2","M2.5","M3","M4","M5","M6","M8","M10","M12","M14","M16","M18","M20","M22","M24"],"Units":"Metric","STI Thread":"Yes","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"14mm - 79.1mm","Taper-Sizes":"-","Overall-Sizes":"47.8mm - 138.1mm","Shank-Sizes":"3.5814mm - 22.7584mm","Friendly Name":"128","CategoryBrand":"OSG"}
141

141

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20141/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_141_-_Straight_Fluted_Taps_-_TiCN"],"Number of Flutes":["4","3"],"Square Width - Metric (k)":["12.4206","2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985","8.1788","9.144","10.3124","14.478","19.4564","23.495"],"Chamfer Length - Inch":["0.885826","0.177165","0.07874","0.029527","0.248031","0.110236","0.041338","0.283464","0.125984","0.047244","0.35433","0.15748","0.059055","0.442913","0.19685","0.073818","0.531496","0.23622","0.088582","0.620078","0.27559","0.103346","0.070866","0.026574","0.094488","0.035433","0.11811","0.044291","0.708661","0.31496","0.3937","0.147637","0.062992","0.023622","0.47244","1.062992","0.206692","0.551181","1.240157","0.629921","1.417322","0.055118"],"Overall Length - Metric (L)":["113.5","49.2","54","60.3","63.5","69.1","74.6","85.7","46","50.8","91.3","96.8","102.4","124.6","44.5","138.1","154","41.3"],"Major Diameter - Metric":["20","3","4","5","6","8","10","12","2.5","3.5","4.5","7","14","16","18","24","2","30","36","1.6"],"Shank Diameter - Metric (d)":["16.5608","3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218","10.8966","12.192","13.7668","19.304","25.9334","31.3182"],"Tap Drill Size Max - Metric":["17.744","2.599","3.422","4.334","5.153","6.912","8.676","10.441","2.138","3.01","3.876","6.152","7.153","9.153","8.912","10.912","10.676","12.912","12.21","14.676","14.21","16.676","15.744","18.676","21.252","1.679","12.676","26.771","32.27","1.321"],"Pitch":["2.5","0.5","0.7","0.8","1","1.25","1.5","1.75","0.45","0.6","0.75","2","3","0.4","3.5","4","0.35"],"Neck Length - Metric (L1)":["60.5","18.9","23.7","26.9","30","33.6","35.1","46","13.8","20.4","26.7","49.3","50.8","54.1","63.5","12.1","74.7","80","8.9"],"Tap Drill Size Min - Metric":["17.294","2.459","3.242","4.134","4.917","6.647","8.376","10.106","2.013","2.85","3.688","5.918","6.917","8.917","8.647","10.647","10.376","12.647","11.835","14.376","13.835","16.376","15.294","18.376","20.752","1.567","12.376","26.211","31.67","1.221"],"Square Length - Metric (Ik)":["17.4625","4.7625","6.35","7.9375","9.525","11.1125","12.7","14.2875","15.875","19.05","25.4","28.575"],"Thread Length - Metric (Lc)":["38.8","7.5","10.5","12.1","15.9","18.8","22.5","27.2","12.8","9","12.2","15","26.3","30","31","37.5","45","11.1","30.8","52.5","60","7.9"],"View Catalog Page":"Here","Coolant Thru":"No","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Benefit 3":"S/O increases mechanical lubricity","Chamfer Type":["Taper (9P)","Plug (4P)","Bottom (1.5P)"],"Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Benefit 4":"Improves wear resistance for extended tap life","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Low Carbon Steel : 1010; 1018":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Feature 2":"Straight Flute","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Web Literature 1":["8002024CA-TP,310","8002024CA-TP,308","8002024CA-TP,309"],"Meets 2B Class of Fit":["No","Yes"],"Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Meets 3B Class of Fit":["No","Yes"],"Notes":"Other coatings are available upon request.","Web Literature 4":"800389CA","Product Category":"Straight Flute","Thread Type":["M","MF"],"Surface Treatment":["BRIGHT","Steam Oxide"],"STI Thread":"No","Thread Limit":["D7","D3","D4","D5","D6","D8","D9"],"Meets 4H Class of Fit":"Yes","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M20","M3","M4","M5","M6","M8","M10","M12","M2.5","M3.5","M4.5","m7","M14","M16","M18","M24","M2","M30","M36","M1.6"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"8.9mm - 80mm","Taper-Sizes":"-","Overall-Sizes":"41.3mm - 154mm","Shank-Sizes":"3.5814mm - 31.3182mm","Friendly Name":"141","CategoryBrand":"OSG"}
141C

141C

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20141C/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_141C_-_Straight_Fluted_Taps_-_Catalog"],"Chamfer Length - Inch":["0.15748","0.059055","0.19685","0.073818","0.23622","0.088582","0.27559","0.103346"],"Number of Flutes":["3","4"],"Square Width - Metric (k)":["4.8514","6.0452","7.2644","6.985"],"Major Diameter - Metric":["6","8","10","12"],"Overall Length - Metric (L)":["63.5","69.1","74.6","85.7"],"Tap Drill Size Max - Metric":["5.153","6.912","8.676","10.441"],"Shank Diameter - Metric (d)":["6.477","8.0772","9.6774","9.3218"],"Pitch":["1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["30.9","33.6","35.1","46"],"Tap Drill Size Min - Metric":["4.917","6.647","8.376","10.106"],"Square Length - Metric (Ik)":["7.9375","9.525","11.1125"],"Thread Length - Metric (Lc)":["17.8","18.8","22.5","27.2"],"View Catalog Page":"Here","Cast Iron":"K; Best","Chamfer Type":["Plug (4P)","Bottom (1.5P)"],"Aluminum : Casting":"N; Best","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT","Interrupted Thread":"No","Web Literature 1":"8002024CA-TP,285","Meets 2B Class of Fit":"No","Full Description":"GENERAL PURPOSE Taps Straight Flute Hand Taps for Cast Iron","Web Literature 4":"800389CA","Meets 3B Class of Fit":"No","Product Category":"Straight Flute","Thread Type":"M","STI Thread":"No","Thread Limit":["D5","D6"],"Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Substrate":"HSS","Product Overview":"HSS, Steamoxide","Thread Size - Metric":["M6","M8","M10","M12"],"Units":"Metric","Surface Treatment":"Nitride / Steam Oxide","Short Description":"Ideal for Cast Iron","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"30.9mm - 46mm","Taper-Sizes":"-","Overall-Sizes":"63.5mm - 85.7mm","Shank-Sizes":"6.477mm - 9.6774mm","Friendly Name":"141C","CategoryBrand":"OSG"}
16610

16610

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016610/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16610_-_4_Flute_UNF_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016610/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16610_-_4_Flute_UNF_-_Angle_-_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016610/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16610_-_4_Flute_UNF_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016610/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16610_-_4_Flute_UNF_-_Close_up","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016610/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16610_-_3_Flute_UNC_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016610/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16610_-_3_Flute_UNF_-_Angle_-_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016610/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16610_-_3_Flute_UNC_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016610/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16610_-_3_Flute_UNF_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016610/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16610_-_3_Flute_UNF_-_Close_up"],"Chamfer Length - Inch":["0.047244","0.059055","0.073818","0.088582","0.103346","0.11811"],"Number of Flutes":["3","4"],"Square Width - Metric (k)":["3.8608","4.8514","6.0452","7.2644","6.985","8.1788","9.144"],"Major Diameter - Metric":["5","6","8","10","12","14","16"],"Tap Drill Size Max - Metric":["4.334","5.153","6.912","8.676","8.912","10.441","10.676","10.912","12.21","12.676","14.21","14.676"],"Shank Diameter - Metric (d)":["4.9276","6.477","8.0772","9.6774","9.3218","10.8966","12.192"],"Overall Length - Metric (L)":["70","80","90","100","110"],"Pitch":["0.8","1","1.25","1.5","1.75","2"],"Neck Length - Metric (L1)":["25","31","35","39"],"Tap Drill Size Min - Metric":["4.134","4.917","6.647","8.376","8.647","10.106","10.376","10.647","11.835","12.376","13.835","14.376"],"Square Length - Metric (Ik)":["6.35","7.9375","9.525","11.1125","12.7","14.2875"],"Thread Length - Metric (Lc)":["10","12","15","18","21","24"],"View Catalog Page":"Here","Cast Iron":"K; Best","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Excellent coolant flow","Coolant Thru":"Yes","Benefit 3":"For high wear resistance and toughness","Aluminum : Casting":"N; Best","Benefit 2":"Greater performance in non-ferrous materials","Cutting Speed (SFM) - Aluminum : Casting":"30-330","Helix Angle - Degree":"0","Feature 1":"Larger Oil Hole Design","List Name":"A-CHT","Cutting Direction":"RH","Cutting Speed (SFM) - Cast Iron":"15-50","Full Description":"A Brand A-CHT is an Advanced Performance Carbide Coolant-Through Taps for Cast Iron and Aluminum Alloy","Feature 2":"Bright finish","Interrupted Thread":"No","Web Literature 1":"8002024CA-TP,256","Meets 2B Class of Fit":"No","Feature 3":"Ultra-Fine Grain Carbide","Web Literature 4":"800389CA","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request. Reduce SFM 50% - 70% while using external coolant.","Web Literature 2":"800323CA|80061CA-V2","Product Category":"Straight Flute","Short Description":"Advanced Performance Coolant-Through Taps Designed for Cast Iron","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","Product Overview":"Carbide, DIN Overall Length, Bright Finish, Metric Sizes","STI Thread":"No","Thread Limit":["D4","D5","D6","D7"],"Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M5","M6","M8","M10","M12","M14","M16"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"25mm - 39mm","Taper-Sizes":"-","Overall-Sizes":"70mm - 110mm","Shank-Sizes":"4.9276mm - 12.192mm","Friendly Name":"16610","CategoryBrand":"A Brand"}
16615

16615

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016615/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16615_-_4_Flute_UNF_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016615/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16615_-_4_Flute_UNF_-_Angle_-_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016615/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16615_-_4_Flute_UNF_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016615/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16615_-_4_Flute_UNF_-_Close_up","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016615/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16615_-_3_Flute_UNF_-_Angle_-_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%2016615/Taps_-_Tap_-_A_Brand_A-CHT_-_List_16615_-_3_Flute_UNC_-_Face"],"Chamfer Length - Inch":["0.0625","0.053571","0.075","0.083333","0.09375","0.107142","0.115384","0.136363"],"Overall Length - Inch (L)":["3.15","3.543","3.937","4.331"],"Major Diameter - Inch":["0.216","0.25","0.3125","0.375","0.4375","0.5","0.625"],"Number of Flutes":["3","4"],"Tap Drill Size Max - Inch":["0.181","0.186","0.207","0.22","0.265","0.277","0.321","0.34","0.376","0.395","0.434","0.457","0.546","0.578"],"Threads Per Inch":["24","28","20","18","16","14","13","11"],"Neck Length - Inch (L1)":["0.945","1.181","1.378"],"Tap Drill Size Min - Inch":["0.171","0.177","0.196","0.211","0.252","0.267","0.307","0.33","0.36","0.383","0.417","0.446","0.527","0.565"],"Square Length - Inch (Ik)":["0.28125","0.3125","0.375","0.4375","0.40625","0.5625"],"Shank Diameter - Inch (d)":["0.22","0.255","0.318","0.381","0.323","0.367","0.48"],"Thread Length - Inch (Lc)":["0.5","0.598","0.665","0.752","0.858","0.921","1.091"],"Square Width - Inch (k)":["0.165","0.191","0.238","0.286","0.242","0.275","0.36"],"View Catalog Page":"Here","Cast Iron":"K; Best","Chamfer Type":"Bottom (1.5P)","Benefit 1":"Excellent coolant flow","Coolant Thru":"Yes","Benefit 3":"For high wear resistance and toughness","Aluminum : Casting":"N; Best","Benefit 2":"Greater performance in non-ferrous materials","Cutting Speed (SFM) - Aluminum : Casting":"30-330","Helix Angle - Degree":"0","Feature 1":"Larger Oil Hole Design","List Name":"A-CHT","Cutting Direction":"RH","Cutting Speed (SFM) - Cast Iron":"15-50","Meets 4H Class of Fit":"No","Full Description":"A Brand A-CHT is an Advanced Performance Carbide Coolant-Through Taps for Cast Iron and Aluminum Alloy","Feature 2":"Bright finish","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Web Literature 1":"8002024CA-TP,255","Feature 3":"Ultra-Fine Grain Carbide","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request. Reduce SFM 50% - 70% while using external coolant.","Web Literature 2":"800323CA|80061CA-V2","Units":"Inch","Product Category":"Straight Flute","Short Description":"Advanced Performance Coolant-Through Taps Designed for Cast Iron","Surface Treatment":"BRIGHT","Substrate":"Carbide","Product Overview":"Carbide, DIN Overall Length, Bright Finish, Inch Sizes","STI Thread":"No","Meets 2B Class of Fit":"Yes","Thread Size - Number":"No. 12","Thread Limit":["H3","H5","h4"],"Meets 3B Class of Fit":"Yes","Thread Type":["UNC","UNF"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","5/8"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.945\" - 1.378\"","Taper-Sizes":"-","Overall-Sizes":"3.15\" - 4.331\"","Shank-Sizes":"0.22\" - 0.48\"","Friendly Name":"16615","CategoryBrand":"A Brand"}
180

180

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20180/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_180_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["4","6"],"Overall Length - Inch (L)":["5.437007","5.751968","6.062992","6.374015","6.688976","7","7.625984","8.251968"],"Chamfer Length - Inch":["0.5","0.1875"],"Major Diameter - Inch":["1.125","1.25","1.375","1.5","1.625","1.75","2","2.25"],"Shank Diameter - Inch (d)":["0.896","1.021","1.108","1.233","1.305","1.43","1.644","1.894"],"Threads Per Inch":"8","Tap Drill Size Max - Inch":["1.015","1.14","1.265","1.39","1.515","1.64","1.89","2.14"],"Neck Length - Inch (L1)":["2.940944","3","3.161417","3.381889","3.590551","3.811023","4"],"Tap Drill Size Min - Inch":["0.99","1.115","1.24","1.365","1.49","1.615","1.865","2.115"],"Square Length - Inch (Ik)":["0.875","1","1.0625","1.125","1.25","1.375","1.4375"],"Thread Length - Inch (Lc)":"1.874015","Square Width - Inch (k)":["0.672","0.766","0.831","0.925","0.979","1.072","1.233","1.42"],"View Catalog Page":"Here","Coolant Thru":"No","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":["Plug (4P)","Bottom (1.5P)"],"Benefit 3":"S/O increases mechanical lubricity","Benefit 2":"For blind and through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Benefit 4":"Improves wear resistance for extended tap life","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-HT 8 PITCH","Meets 4H Class of Fit":"No","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Low Carbon Steel : 1010; 1018":"P; Good","Feature 3":"Bright, Steam Oxide surface treatment","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 2":"Straight Flute","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Web Literature 1":"8002024CA-TP,317","Full Description":"General Purpose straight flute tap series that provides exceptional value for all general threading applications.","Feature 4":"TiN, TiCN surface treatments","Web Literature 4":"800389CA","Notes":"Other coatings are available upon request.","Thread Size - Inch":["1-1/8","1-1/4","1-3/8","1-1/2","1-5/8","1-3/4","2","2-1/4"],"Units":"Inch","Product Category":"Straight Flute","Product Overview":"8 PITCH","Short Description":"8 Pitch Taps","Surface Treatment":"BRIGHT","STI Thread":"No","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Thread Limit":["H5","h6"],"High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Thread Type":["UN","UNC"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"2.940944\" - 4\"","Taper-Sizes":"-","Overall-Sizes":"5.437007\" - 8.251968\"","Shank-Sizes":"0.896\" - 1.894\"","Friendly Name":"180","CategoryBrand":"OSG"}
240

240

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20240/Taps_-_Tap_-_HYPRO_DC_-_List_240_-_Straight_Fluted_Taps_-_Catalog"],"Chamfer Length - Inch":["0.1","0.0375","0.125","0.046875","0.166666","0.0625","0.075","0.222222","0.083333","0.307692","0.115384","0.2","0.071428","0.026785","0.142857","0.053571","0.25","0.09375","0.285714","0.107142"],"Major Diameter - Inch":["0.125","0.138","0.164","0.19","0.25","0.3125","0.375","0.5","0.086","0.112","0.4375"],"Number of Flutes":["3","4"],"Tap Drill Size Max - Inch":["0.1062","0.114","0.139","0.156","0.164","0.207","0.265","0.34","0.434","0.457","0.0737","0.0939","0.22","0.277","0.321","0.376","0.395"],"Threads Per Inch":["40","32","24","20","18","13","56","28","16","14"],"Neck Length - Inch (L1)":["0.626","0.685","0.752","0.866","0.996","1.126","1.252","1.933","0.476","0.559","1.713"],"Tap Drill Size Min - Inch":["0.0979","0.104","0.13","0.145","0.156","0.196","0.252","0.33","0.417","0.446","0.0667","0.0849","0.211","0.267","0.307","0.36","0.383"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375","0.4375","0.40625"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255","0.318","0.381","0.367","0.323"],"Overall Length - Inch (L)":["1.937","2","2.126","2.374","2.5","2.72","2.937","3.374","1.811","1.874","3.157"],"Thread Length - Inch (Lc)":["0.299","0.37","0.374","0.492","0.594","0.665","0.752","0.921","0.437","0.295","0.858"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191","0.238","0.286","0.275","0.242"],"View Catalog Page":"Here","Coolant Thru":"No","Cast Iron":"K; Best","Chamfer Type":["Plug (4P)","Bottom (1.5P)"],"Aluminum : Casting":"N; Best","Aluminum : 6061; 7075":"N; Good","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Full Description":"HYPRO DC Taps High Performance Straight Flute Tap for Aluminum","Helix Angle - Degree":"0","List Name":"DC EX-DC-HT","Cutting Direction":"RH","Meets 4H Class of Fit":"No","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Web Literature 1":["8002024CA-TP,280","8002024CA-TP,281"],"Notes":"Other coatings are available upon request.","Web Literature 4":"800389CA","Product Category":"Straight Flute","Units":"Inch","STI Thread":"No","Meets 2B Class of Fit":"Yes","Thread Size - Number":["No. 5","No. 6","No. 8","No. 10","No. 2","No. 4"],"Thread Limit":["H3","H5","H2"],"Meets 3B Class of Fit":"Yes","Substrate":"HSSE","Thread Type":["UNC","UNF"],"Product Overview":"HSS-Va, Nitride","Surface Treatment":["Nitride","BRIGHT"],"Short Description":"Ideal for Aluminum & Die Castings","Thread Size - Inch":["1/4","5/16","3/8","1/2","7/16"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.476\" - 1.933\"","Taper-Sizes":"-","Overall-Sizes":"1.811\" - 3.374\"","Shank-Sizes":"0.141\" - 0.381\"","Friendly Name":"240","CategoryBrand":"HY-PRO TAP"}
241

241

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20241/Taps_-_Tap_-_HYPRO_DC_-_List_241_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4"],"Chamfer Length - Inch":["0.029527","0.110236","0.047244","0.059055","0.19685","0.073818","0.23622","0.27559","0.07874","0.041338","0.125984","0.15748","0.088582","0.103346"],"Square Width - Metric (k)":["2.794","3.3274","3.8608","4.8514","6.0452","7.2644","6.985"],"Major Diameter - Metric":["3","4","5","6","8","10","12"],"Overall Length - Metric (L)":["49.2","54","60.3","63.5","69.1","74.6","85.7"],"Shank Diameter - Metric (d)":["3.5814","4.2672","4.9276","6.477","8.0772","9.6774","9.3218"],"Tap Drill Size Max - Metric":["2.599","3.422","4.334","5.153","6.912","8.912","8.676","10.441"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["17.2","20.8","24.4","28","28.6","31.8","49.1"],"Tap Drill Size Min - Metric":["2.459","3.242","4.134","4.917","6.647","8.647","8.376","10.106"],"Square Length - Metric (Ik)":["4.7625","6.35","7.9375","9.525","11.1125"],"Thread Length - Metric (Lc)":["7.3","10.1","11.8","14.6","15","18","21"],"View Catalog Page":"Here","Coolant Thru":"No","Cast Iron":"K; Best","Chamfer Type":["Bottom (1.5P)","Plug (4P)"],"Aluminum : Casting":"N; Best","Aluminum : 6061; 7075":"N; Good","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Full Description":"HYPRO DC Taps High Performance Straight Flute Tap for Aluminum","Helix Angle - Degree":"0","List Name":"DC EX-DC-HT","Cutting Direction":"RH","Interrupted Thread":"No","Web Literature 1":"8002024CA-TP,282","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Web Literature 4":"800389CA","Product Category":"Straight Flute","Thread Type":["M","MF"],"Thread Limit":["D3","D4","D5","D6"],"STI Thread":"No","Meets 4H Class of Fit":"Yes","Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Substrate":"HSSE","Units":"Metric","Product Overview":"HSS-Va, Nitride","Surface Treatment":"Nitride","Short Description":"Ideal for Aluminum & Die Castings","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"17.2mm - 49.1mm","Taper-Sizes":"-","Overall-Sizes":"49.2mm - 85.7mm","Shank-Sizes":"3.5814mm - 9.6774mm","Friendly Name":"241","CategoryBrand":"HY-PRO TAP"}
305

305

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20305/Taps_-_Tap_-_EXOTAP-MOLD_-_List_305_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["4","3"],"Major Diameter - Inch":["0.25","0.3125","0.375","0.5","0.625","0.75","0.4375","0.112","0.138","0.164","0.19"],"Chamfer Length - Inch":["0.2","0.222222","0.25","0.307692","0.363636","0.4","0.142857","0.166666","0.285714","0.1","0.125"],"Threads Per Inch":["20","18","16","13","11","10","28","24","14","40","32"],"Tap Drill Size Max - Inch":["0.207","0.265","0.321","0.434","0.546","0.663","0.22","0.277","0.34","0.457","0.578","0.696","0.376","0.395","0.0939","0.114","0.139","0.156","0.164"],"Tap Drill Size Min - Inch":["0.196","0.252","0.307","0.417","0.527","0.642","0.211","0.267","0.33","0.446","0.565","0.682","0.36","0.383","0.0849","0.104","0.13","0.145","0.156"],"Square Length - Inch (Ik)":["0.3125","0.375","0.4375","0.5625","0.6875","0.40625","0.1875","0.25"],"Shank Diameter - Inch (d)":["0.255","0.318","0.381","0.367","0.48","0.59","0.323","0.141","0.168","0.194"],"Overall Length - Inch (L)":["2.5","2.719","2.938","3.375","3.813","4.25","3.156","1.875","2","2.125","2.375"],"Thread Length - Inch (Lc)":["1","1.125","1.251","1.657","1.811","2","1.437","0.562","0.688","0.751","0.874"],"Square Width - Inch (k)":["0.191","0.238","0.286","0.275","0.36","0.442","0.242","0.11","0.131","0.152"],"View Catalog Page":"Here","Coolant Thru":"No","Benefit 1":"Increased toughness and wear resistance","Alloy Steels : 4140; 4340":"P; Good","Chamfer Type":"Plug (4P)","Benefit 2":"For through or blind holes and short chipping materials","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"20-40","Hardened Steels : 35 HRC":"H; Best","Hardened Steels : 35-45 HRC":"H; Good","Feature 1":"HSS-CO material","Cutting Speed (SFM) - Die Steels":"15-20","Helix Angle - Degree":"0","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"15-35","Cutting Direction":"RH","Die Steels":"P; Best","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-15","Meets 4H Class of Fit":"No","List Name":"MOLD-HT","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 2":"Straight Flute","Full Description":"EXOTAP MOLD is a premium solution for tapping various mold steels, such as P20 and H13.","Web Literature 1":"8002024CA-TP,269","Thread Size - Inch":["1/4","5/16","3/8","1/2","5/8","3/4","7/16"],"Notes":"Other coatings are available upon request.","Web Literature 4":"800389CA","Product Category":"Straight Flute","Units":"Inch","Surface Treatment":"BRIGHT","STI Thread":"No","Meets 2B Class of Fit":"Yes","Thread Limit":["H3","H2"],"Meets 3B Class of Fit":"Yes","Product Overview":"HSS-CO","Substrate":"HSS-CO","Thread Type":["UNC","UNF"],"Short Description":"Ideal for Tapping Mold Steel","Neck Length - Inch (L1)":["0.598"],"Thread Size - Number":["No. 4","No. 6","No. 8","No. 10"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.598\"","Taper-Sizes":"-","Overall-Sizes":"1.875\" - 4.25\"","Shank-Sizes":"0.141\" - 0.59\"","Friendly Name":"305","CategoryBrand":"EXOTAP"}
311

311

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20311/Taps_-_Tap_-_EXOCARB_VX_-_List_311_-_Straight_Fluted_Taps_-_Catalog"],"Chamfer Length - Inch":["0.075","0.09375","0.125","0.15","0.107142","0.166666","0.1875","0.214285","0.230769"],"Major Diameter - Inch":["0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5"],"Number of Flutes":["4","5"],"Tap Drill Size Max - Inch":["0.0939","0.114","0.139","0.156","0.164","0.207","0.22","0.265","0.277","0.321","0.34","0.376","0.395","0.434","0.457"],"Threads Per Inch":["40","32","24","20","28","18","16","14","13"],"Neck Length - Inch (L1)":["0.705","0.783","0.827","0.976","0.984","1.177","1.189","1.378"],"Tap Drill Size Min - Inch":["0.0849","0.104","0.13","0.145","0.156","0.196","0.211","0.252","0.267","0.307","0.33","0.36","0.383","0.417","0.446"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375","0.4375","0.40625"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255","0.318","0.381","0.323","0.367"],"Thread Length - Inch (Lc)":["0.295","0.37","0.374","0.492","0.5","0.594","0.606","0.665","0.752","0.858","0.921"],"Overall Length - Inch (L)":["2.205","2.48","2.756","3.15","3.543","3.937","4.331"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191","0.238","0.286","0.242","0.275"],"View Catalog Page":"Here","Coolant Thru":"No","Class of Fit":"2B","Chamfer Type":"Modified Bottom (3P)","Cutting Speed (SFM) - Hardened Steels : 45-50 HRC":"3-10","Cutting Speed (SFM) - Hardened Steels : 50-70 HRC":"3-10","Helix Angle - Degree":"0","Cutting Direction":"RH","Hardened Steels : 50-70 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Good","Meets 4H Class of Fit":"No","Meets 6H Class of Fit":"No","Interrupted Thread":"No","Full Description":"EXOCARB VX Taps Taps The Tapping Solution for Hardened Steels 54-68Rc","Web Literature 1":"8002024CA-TP,257","Meets 3B Class of Fit":"No","Web Literature 4":"800389CA","Product Category":"Straight Flute","Units":"Inch","List Name":"VX-OT","Substrate":"Carbide","Product Overview":"Carbide, Straight Flute, DIN Overall Length, V-coating","STI Thread":"No","Short Description":"For Hardended Materials up to 65HRC","Meets 2B Class of Fit":"Yes","Thread Size - Number":["No. 4","No. 6","No. 8","No. 10"],"Thread Type":["UNC","UNF"],"Surface Treatment":"V","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.705\" - 1.378\"","Taper-Sizes":"-","Overall-Sizes":"2.205\" - 4.331\"","Shank-Sizes":"0.141\" - 0.381\"","Friendly Name":"311","CategoryBrand":"EXOCARB"}
319

319

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20319/Taps_-_Tap_-_EXOCARB_-_List_319_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4"],"Chamfer Length - Inch":["0.0375","0.046875","0.0625","0.075","0.053571","0.083333","0.09375","0.107142","0.115384"],"Major Diameter - Inch":["0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5"],"Tap Drill Size Max - Inch":["0.0939","0.114","0.139","0.156","0.164","0.207","0.22","0.265","0.321","0.34","0.376","0.395","0.434","0.457","0.277"],"Threads Per Inch":["40","32","24","20","28","18","16","14","13"],"Neck Length - Inch (L1)":["0.704","0.783","0.826","0.976","0.984","1.177","1.188","1.377"],"Tap Drill Size Min - Inch":["0.0849","0.104","0.13","0.145","0.156","0.196","0.211","0.252","0.307","0.33","0.36","0.383","0.417","0.446","0.267"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375","0.4375","0.40625"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255","0.318","0.381","0.323","0.367"],"Thread Length - Inch (Lc)":["0.295","0.37","0.374","0.492","0.5","0.594","0.606","0.665","0.751","0.858","0.921"],"Overall Length - Inch (L)":["2.205","2.48","2.756","3.15","3.543307","3.937007","4.331","3.937"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191","0.238","0.286","0.242","0.275"],"View Catalog Page":"Here","Coolant Thru":"No","Cobalt-Chrome":"Other; Best","Cast Iron":"K; Best","Class of Fit":"2B","Chamfer Type":"Bottom (1.5P)","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Copper Alloys":"N; Best","Cutting Speed (SFM) - Fiberglass":"30-60","Cutting Speed (SFM) - Aluminum : Casting":"55-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"60-160","Cutting Speed (SFM) - Copper Alloys":"40-80","Helix Angle - Degree":"0","Cutting Speed (SFM) - Cast Iron":"40-90","Cutting Speed (SFM) - Cobalt-Chrome":"15-40","List Name":"CHT","Fiberglass":"Other; Good","Cutting Direction":"RH","Meets 4H Class of Fit":"No","Full Description":"EXOCARB Taps Taps Carbide Taps for Cast Iron & Aluminum","Meets 6H Class of Fit":"No","Interrupted Thread":"No","Web Literature 1":"8002024CA-TP,261","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request.","Web Literature 4":"800389CA","Product Category":"Straight Flute","Units":"Inch","Surface Treatment":"BRIGHT","Substrate":"Carbide","STI Thread":"No","Meets 2B Class of Fit":"Yes","Thread Size - Number":["No. 4","No. 6","No. 8","No. 10"],"Product Overview":"Straight Flute, DIN Overall Length","Short Description":"Tungsten Carbide Taps","Thread Type":["UNC","UNF"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.704\" - 1.377\"","Taper-Sizes":"-","Overall-Sizes":"2.205\" - 4.331\"","Shank-Sizes":"0.141\" - 0.381\"","Friendly Name":"319","CategoryBrand":"EXOCARB"}
328

328

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20328/Taps_-_Tap_-_EXOTAP-MOLD_-_List_328_-_Pipe_Taps_-_Catalog"],"Number of Flutes":["4","5"],"Major Diameter - Inch":["0.125","0.25","0.375","0.5","0.75"],"Threads Per Inch":["27","18","14"],"Neck Length - Inch (L1)":["0.992","1.318"],"Tap Drill Size Min - Inch":["0.332","0.4375","0.5625","0.703125","0.90625"],"Square Length - Inch (Ik)":["0.375","0.4375","0.5","0.625","0.6875"],"Overall Length - Inch (L)":["2.125984","2.437007","2.562992","3.125984","3.251968"],"Thread Length - Inch (Lc)":["0.751","1.062","1.374"],"Shank Diameter - Inch (d)":["0.4375","0.5625","0.7","0.6875","0.9063"],"Square Width - Inch (k)":["0.328","0.421","0.531","0.515","0.679"],"View Catalog Page":"Here","Coolant Thru":"No","Benefit 1":"Increased toughness and wear resistance","Alloy Steels : 4140; 4340":"P; Best","Benefit 2":"For standard NPT tapered pipe applications","Cutting Speed (SFM) - Alloy Steels : 4140; 4340":"10-25","Cutting Speed (SFM) - Die Steels":"10-15","Hardened Steels : 35 HRC":"H; Best","Cutting Speed (SFM) - Hardened Steels : 35 HRC":"10-20","Cutting Speed (SFM) - High Carbon Steel : 1065":"10-20","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"10-25","Hardened Steels : 35-45 HRC":"H; Good","Cutting Speed (SFM) - Stainless Steels : 300":"10-25","Cutting Speed (SFM) - Stainless Steels : 400":"10-25","Feature 1":"HSS-CO material","Helix Angle - Degree":"0","Feature 2":"NPT or ANPT","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"15-40","Cutting Direction":"RH","Die Steels":"P; Best","Cutting Speed (SFM) - Hardened Steels : 35-45 HRC":"8-12","Cutting Speed (SFM) - Stainless Steels : 17-4PH":"8-12","Meets 4H Class of Fit":"No","List Name":"MOLD NPT/ANPT","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Full Description":"EXOTAP MOLD is the premium pipe tap solution for threading die steels such as P20 and H13.","Meets 2B Class of Fit":"No","Web Literature 1":"8002024CA-TP,366","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request.","Thread Size - Inch":["1/8","1/4","3/8","1/2","3/4"],"Web Literature 4":"800389CA","Product Category":"Straight Flute","Units":"Inch","Surface Treatment":"BRIGHT","STI Thread":"No","Thread Type":"NPT, ANPT","Product Overview":"NPT, HSS-Co","Stainless Steels : 17-4PH":"M; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Short Description":"Ideal for Tapping Mold Steel","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.992\" - 1.318\"","Taper-Sizes":"-","Overall-Sizes":"2.125984\" - 3.251968\"","Shank-Sizes":"0.4375\" - 0.9063\"","Friendly Name":"328","CategoryBrand":"EXOTAP"}
329

329

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20329/Taps_-_Tap_-_EXOCARB_Diamond_-_List_329_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4","5"],"Chamfer Length - Inch":["0.0375","0.046875","0.0625","0.075","0.053571","0.078125","0.104166","0.125","0.089285","0.138888","0.15625","0.178571","0.192307","0.083333","0.09375","0.107142","0.115384"],"Major Diameter - Inch":["0.112","0.138","0.164","0.19","0.25","0.3125","0.375","0.4375","0.5"],"Tap Drill Size Max - Inch":["0.0939","0.114","0.139","0.156","0.164","0.207","0.22","0.265","0.277","0.321","0.34","0.376","0.395","0.434","0.457"],"Threads Per Inch":["40","32","24","20","28","18","16","14","13"],"Neck Length - Inch (L1)":["0.705","0.783","0.827","0.984","1.189","1.378"],"Tap Drill Size Min - Inch":["0.0849","0.104","0.13","0.145","0.156","0.196","0.211","0.252","0.267","0.307","0.33","0.36","0.383","0.417","0.446"],"Square Length - Inch (Ik)":["0.1875","0.25","0.3125","0.375","0.4375","0.40625"],"Shank Diameter - Inch (d)":["0.141","0.168","0.194","0.255","0.318","0.381","0.323","0.367"],"Thread Length - Inch (Lc)":["0.295","0.37","0.374","0.5","0.606","0.665","0.752","0.858","0.921"],"Overall Length - Inch (L)":["2.205","2.48","2.756","3.15","3.543","3.937","4.331"],"Square Width - Inch (k)":["0.11","0.131","0.152","0.191","0.238","0.286","0.242","0.275"],"View Catalog Page":"Here","Coolant Thru":"No","Class of Fit":["3B","2B"],"Chamfer Type":["Bottom (1.5P)","Modified Bottom (2.5P)"],"Aluminum : 6061; 7075":"N; Best","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Benefit 2":"Ultra-fine coating ensures sharper cutting edges while diamond coating extends life up to 50X that of similar uncoated routers","Aluminum : Casting":"N; Best","Benefit 3":"Greater reach capability","Copper Alloys":"N; Good","Cutting Speed (SFM) - Fiberglass":"30-60","Cutting Speed (SFM) - MMC (Metal Matrix Composites)":"30-60","Cutting Speed (SFM) - Aluminum : Casting":"55-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"60-160","Cutting Speed (SFM) - Copper Alloys":"40-80","Helix Angle - Degree":"0","Notes":"3B fit taps conform to UNJ Aerospace internal threading applications.","Feature 1":"Microgran carbide body","List Name":"DIA-OTT","Fiberglass":"Other; Best","Cutting Direction":"RH","MMC (Metal Matrix Composites)":"N; Best","Feature 2":"Pateneted OSG CVD Ultra-fine Diamond Coating","Meets 4H Class of Fit":"No","Feature 3":"DIN Overall Length","Meets 6H Class of Fit":"No","Interrupted Thread":"No","Full Description":"The EXOCARB Diamond Taps are premium solutions for High SiC Aluminum, MMC, and Carbon Fiber. The taps feature OSG's patented diamond coating for an extended tool life.","Web Literature 1":"8002024CA-TP,259","Web Literature 4":"800389CA","Product Category":"Straight Flute","Units":"Inch","Substrate":"Carbide","Surface Treatment":"DIAMOND","STI Thread":"No","Meets 2B Class of Fit":"Yes","Thread Size - Number":["No. 4","No. 6","No. 8","No. 10"],"Short Description":"OSG Patented Diamond Coated Taps for High SiC Aluminum, MMC, and Carbon Fiber","Meets 3B Class of Fit":["Yes","No"],"Product Overview":"Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond","Thread Type":["UNC","UNF"],"Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.705\" - 1.378\"","Taper-Sizes":"-","Overall-Sizes":"2.205\" - 4.331\"","Shank-Sizes":"0.141\" - 0.381\"","Friendly Name":"329","CategoryBrand":"EXOCARB"}
341

341

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20341/Taps_-_Tap_-_EXOCARB_VX_-_List_341_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["4","5","6"],"Square Width - Metric (k)":["2.5","3.2","4","4.5","5","5.5","6.5","8","10","11","12"],"Chamfer Length - Inch":["0.053149","0.059055","0.082677","0.094488","0.11811","0.147637","0.177165","0.206692","0.23622","0.295275"],"Major Diameter - Metric":["2.6","3","4","5","6","8","10","12","14","16","18","20"],"Overall Length - Metric (L)":["44","45.9","51.9","59.9","61.8","70","75","82","88","95","100","105"],"Shank Diameter - Metric (d)":["3","4","5","5.5","6","6.2","7","8.5","10.5","12.5","14","15"],"Tap Drill Size Max - Metric":["2.238","2.599","3.422","4.334","5.153","6.912","7.153","8.676","8.912","9.153","10.441","10.676","10.912","11.153","12.21","12.676","14.21","14.676","15.744","16.676","17.744","18.676"],"Pitch":["0.45","0.5","0.7","0.8","1","1.25","1.5","1.75","2","2.5"],"Tap Drill Size Min - Metric":["2.113","2.459","3.242","4.134","4.917","6.647","6.917","8.376","8.647","8.917","10.106","10.376","10.647","10.917","11.835","12.376","13.835","14.376","15.294","16.376","17.294","18.376"],"Square Length - Metric (Ik)":["5","6","7","8","9","11","13","14","15"],"Thread Length - Metric (Lc)":["14","11","13","15.9","19","22","24","29","30","32","37"],"View Catalog Page":"Here","Coolant Thru":"No","Chamfer Type":"Modified Bottom (3P)","Cutting Speed (SFM) - Hardened Steels : 45-50 HRC":"3-10","Cutting Speed (SFM) - Hardened Steels : 50-70 HRC":"3-10","Helix Angle - Degree":"0","Cutting Direction":"RH","Hardened Steels : 50-70 HRC":"H; Best","Hardened Steels : 45-50 HRC":"H; Good","Full Description":"EXOCARB VX Taps Taps The Tapping Solution for Hardened Steels 54-68Rc","Interrupted Thread":"No","Web Literature 1":"8002024CA-TP,258","Meets 2B Class of Fit":["No","Yes"],"Meets 3B Class of Fit":["No","Yes"],"Product Category":"Straight Flute","Web Literature 4":"800389CA","Notes":"Tapping Guidlines 1. Set tapping speed between 3 ~ 10 SFM. 2. Choose largest hole-size possible, within the recommended tolerance range. 3. Use a non-water soluble cutting fluid. 4. Use highly rigit machine and tool holders. 5. Tapping by hand is NOT recommended. 6. For tapping length over 1.5D, step feed is recommended.","List Name":"VX-OT","Thread Type":["M","MF"],"Substrate":"Carbide","Product Overview":"Carbide, Straight Flute, DIN Overall Length, V-coating","Short Description":"For Hardended Materials up to 65HRC","STI Thread":"No","Thread Limit":["OH3","OH4"],"Meets 4H Class of Fit":["Yes","No"],"Meets 6H Class of Fit":"Yes","Thread Size - Metric":["M2.6","M3","M4","M5","M6","M8","M10","M12","M14","M16","M18","M20"],"Units":"Metric","Surface Treatment":"V","Neck Length - Metric (L1)":["19","21","23.9","29"],"Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"19mm - 29mm","Taper-Sizes":"-","Overall-Sizes":"44mm - 105mm","Shank-Sizes":"3mm - 15mm","Friendly Name":"341","CategoryBrand":"EXOCARB"}
349

349

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20349/Taps_-_Tap_-_EXOCARB_-_List_349_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4"],"Square Width - Metric (k)":["2.5","3.2","4","4.5","5","5.5","6.5","8","10","11","12","13","15"],"Chamfer Length - Inch":["0.017716","0.020669","0.023622","0.026574","0.029527","0.041338","0.047244","0.059055","0.073818","0.088582","0.103346","0.035433","0.053149","0.082677","0.094488","0.11811","0.147637","0.177165","0.206692","0.23622","0.295275","0.35433"],"Major Diameter - Metric":["1.4","1.6","1.7","1.8","2","2.3","2.5","2.6","3","4","5","6","8","10","12","14","16","18","20","22","24"],"Overall Length - Metric (L)":["34","36","40","42","44","46","52","60","62","70","75","82","80","88","95","100","105","115","120"],"Shank Diameter - Metric (d)":["3","4","5","5.5","6","6.2","7","8.5","10.5","12.5","14","15","17","19"],"Tap Drill Size Max - Metric":["1.258","1.321","1.421","1.519","1.679","1.979","2.138","2.238","2.599","3.422","4.334","5.153","6.912","7.153","8.676","8.912","9.153","10.441","10.676","10.912","11.153","12.21","12.676","14.21","14.676","15.744","16.676","17.744","18.676","19.744","20.676","21.252"],"Pitch":["0.3","0.35","0.4","0.45","0.5","0.7","0.8","1","1.25","1.5","1.75","2","2.5","3"],"Neck Length - Metric (L1)":["11.5","13.5","16","17","13","14.3","17.8"],"Tap Drill Size Min - Metric":["1.183","1.221","1.321","1.422","1.567","1.867","2.013","2.113","2.459","3.242","4.134","4.917","6.647","6.917","8.376","8.647","8.917","10.106","10.376","10.647","10.917","11.835","12.376","13.835","14.376","15.294","16.376","17.294","18.376","19.294","20.376","20.752"],"Square Length - Metric (Ik)":["5","6","7","8","9","11","13","14","15","16","18"],"Thread Length - Metric (Lc)":["9","10","11","12","13","14","16","19","22","24","20","29","21","35"],"View Catalog Page":"Here","Coolant Thru":"No","Cobalt-Chrome":"Other; Best","Cast Iron":"K; Best","Chamfer Type":["Bottom (1.5P)","Modified Bottom (3P)"],"Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Copper Alloys":"N; Best","Cutting Speed (SFM) - Fiberglass":"30-60","Cutting Speed (SFM) - Aluminum : Casting":"55-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"60-160","Cutting Speed (SFM) - Copper Alloys":"40-80","Helix Angle - Degree":"0","Cutting Speed (SFM) - Cast Iron":"40-90","Cutting Speed (SFM) - Cobalt-Chrome":"15-40","List Name":"CHT","Cutting Direction":"RH","Fiberglass":"Other; Good","Interrupted Thread":"No","Full Description":"EXOCARB Taps Carbide Taps for Cast Iron & Aluminum","Web Literature 1":["8002024CA-TP,264","8002024CA-TP,265"],"Meets 2B Class of Fit":["No","Yes"],"Meets 3B Class of Fit":["No","Yes"],"Web Literature 4":"800389CA","Notes":"Other coatings are available upon request. Brazed Carbide","Product Category":"Straight Flute","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","STI Thread":"No","Thread Limit":["OH2","OH3","OH4","OH5"],"Meets 4H Class of Fit":["Yes","No"],"Meets 6H Class of Fit":"Yes","Product Overview":"Straight Flute, JIS","Thread Size - Metric":["M1.4","M1.6","M1.7","M1.8","M2","M2.3","M2.5","M2.6","M3","M4","M5","M6","M8","M10","M12","M14","M16","M18","M20","M22","M24"],"Short Description":"Tungsten Carbide Taps","Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"11.5mm - 17.8mm","Taper-Sizes":"-","Overall-Sizes":"34mm - 120mm","Shank-Sizes":"3mm - 19mm","Friendly Name":"349","CategoryBrand":"EXOCARB"}
356

356

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20356/Taps_-_Tap_-_EXOCARB_-_List_356_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4"],"Overall Length - Metric (L)":["100","150"],"Square Width - Metric (k)":["4.5","5","5.5","6.5"],"Chamfer Length - Inch":["0.059055","0.073818","0.088582","0.103346"],"Major Diameter - Metric":["6","8","10","12"],"Tap Drill Size Max - Metric":["5.153","6.912","8.676","8.912","9.153","10.441"],"Shank Diameter - Metric (d)":["6","6.2","7","8.5"],"Pitch":["1","1.25","1.5","1.75"],"Tap Drill Size Min - Metric":["4.917","6.647","8.376","8.647","8.917","10.106"],"Square Length - Metric (Ik)":["7","8","9"],"Thread Length - Metric (Lc)":["24","22","29"],"View Catalog Page":"Here","Coolant Thru":"No","Cobalt-Chrome":"Other; Best","Cast Iron":"K; Best","Chamfer Type":"Bottom (1.5P)","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Copper Alloys":"N; Best","Cutting Speed (SFM) - Fiberglass":"30-60","Cutting Speed (SFM) - Aluminum : Casting":"55-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"60-160","Cutting Speed (SFM) - Copper Alloys":"40-80","Helix Angle - Degree":"0","Cutting Speed (SFM) - Cast Iron":"40-90","Cutting Speed (SFM) - Cobalt-Chrome":"15-40","Cutting Direction":"RH","Fiberglass":"Other; Good","List Name":"LT-OTT","Interrupted Thread":"No","Full Description":"EXOCARB Taps Carbide Taps for Cast Iron & Aluminum","Web Literature 1":"8002024CA-TP,266","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Notes":"Other coatings are available upon request.","Web Literature 4":"800389CA","Product Category":"Straight Flute","Thread Type":["M","MF"],"Surface Treatment":"BRIGHT","Substrate":"Carbide","STI Thread":"No","Thread Limit":["OH3","OH4"],"Meets 4H Class of Fit":["Yes","No"],"Meets 6H Class of Fit":"Yes","Product Overview":"Straight Flute, Long Shank, JIS","Short Description":"Tungsten Carbide Taps","Thread Size - Metric":["M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"100mm - 150mm","Shank-Sizes":"6mm - 8.5mm","Friendly Name":"356","CategoryBrand":"EXOCARB"}
359

359

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20359/Taps_-_Tap_-_EXOCARB_Diamond_-_List_359_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":["3","4","5"],"Square Width - Metric (k)":["3.2","4","4.5","5","5.5","6.5"],"Chamfer Length - Inch":["0.049212","0.068897","0.07874","0.098425","0.123031","0.147637","0.172244"],"Major Diameter - Metric":["3","4","5","6","8","10","12"],"Overall Length - Metric (L)":["46","52","60","62","70","75","82"],"Tap Drill Size Max - Metric":["2.599","3.422","4.334","5.153","6.912","8.676","10.441"],"Shank Diameter - Metric (d)":["4","5","5.5","6","6.2","7","8.5"],"Pitch":["0.5","0.7","0.8","1","1.25","1.5","1.75"],"Neck Length - Metric (L1)":["19","21","24","29"],"Tap Drill Size Min - Metric":["2.459","3.242","4.134","4.917","6.647","8.376","10.106"],"Square Length - Metric (Ik)":["6","7","8","9"],"Thread Length - Metric (Lc)":["11","13","16","19","22","24","29"],"View Catalog Page":"Here","Coolant Thru":"No","Class of Fit":"6H","Chamfer Type":"Modified Bottom (2.5P)","Aluminum : 6061; 7075":"N; Best","Benefit 1":"Superior hardness & wear resistance versus High Speed Steel","Benefit 2":"Ultra-fine coating ensures sharper cutting edges while diamond coating extends life up to 50X that of similar uncoated routers","Aluminum : Casting":"N; Best","Benefit 3":"Greater reach capability","Copper Alloys":"N; Good","Cutting Speed (SFM) - Fiberglass":"30-60","Cutting Speed (SFM) - MMC (Metal Matrix Composites)":"30-60","Cutting Speed (SFM) - Aluminum : Casting":"55-120","Cutting Speed (SFM) - Aluminum : 6061; 7075":"60-160","Cutting Speed (SFM) - Copper Alloys":"40-80","Helix Angle - Degree":"0","Feature 1":"Microgran carbide body","List Name":"DIA-OTT","Fiberglass":"Other; Best","Cutting Direction":"RH","MMC (Metal Matrix Composites)":"N; Best","Feature 2":"Pateneted OSG CVD Ultra-fine Diamond Coating","Meets 4H Class of Fit":"No","Feature 3":"DIN Overall Length","Interrupted Thread":"No","Full Description":"The EXOCARB Diamond Taps are premium solutions for High SiC Aluminum, MMC, and Carbon Fiber. The taps feature OSG's patented diamond coating for an extended tool life.","Web Literature 1":"8002024CA-TP,260","Meets 2B Class of Fit":"No","Meets 3B Class of Fit":"No","Product Category":"Straight Flute","Web Literature 4":"800389CA","Thread Type":"M","Substrate":"Carbide","Surface Treatment":"DIAMOND","STI Thread":"No","Short Description":"OSG Patented Diamond Coated Taps for High SiC Aluminum, MMC, and Carbon Fiber","Meets 6H Class of Fit":"Yes","Product Overview":"Straight Flute, JIS, OSG CVD Diamond","Thread Size - Metric":["M3","M4","M5","M6","M8","M10","M12"],"Units":"Metric","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"19mm - 29mm","Taper-Sizes":"-","Overall-Sizes":"46mm - 82mm","Shank-Sizes":"4mm - 8.5mm","Friendly Name":"359","CategoryBrand":"EXOCARB"}
916

916

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20916/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_916_-_Straight_Fluted_Taps_-_Catalog"],"Number of Flutes":"4","Major Diameter - Inch":["0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Chamfer Length - Inch":["0.2","0.222222","0.25","0.285714","0.307692","0.363636","0.4"],"Overall Length - Inch (L)":["6","8","10","12"],"Threads Per Inch":["20","18","16","14","13","11","10"],"Tap Drill Size Max - Inch":["0.207","0.265","0.321","0.376","0.434","0.546","0.663"],"Neck Length - Inch (L1)":["1.688976","1.755905","1.881889","2.224409","2.444881","2.598425","2.787401"],"Tap Drill Size Min - Inch":["0.196","0.252","0.307","0.36","0.417","0.527","0.642"],"Square Length - Inch (Ik)":["0.3125","0.374015","0.437007","0.5","0.562992","0.688976","0.748031"],"Shank Diameter - Inch (d)":["0.255","0.317992","0.380984","0.44437","0.507008","0.632992","0.759016"],"Thread Length - Inch (Lc)":["1","1.125984","1.251968","1.437007","1.65748","1.811023","2"],"Square Width - Inch (k)":["0.190945","0.238189","0.285827","0.333071","0.379921","0.553937","0.568898"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":"Plug (4P)","Benefit 3":"S/O increases mechanical lubricity","Benefit 2":"For blind and through hole applications","Coolant Thru":"No","Cutting Speed (SFM) - Cast Iron":"25-75","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","List Name":"GENERAL PURPOSE-LS-HT","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Low Carbon Steel : 1010; 1018":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Feature 3":"Steam Oxide surface treatment","Feature 2":"Straight Flute","Full Description":"General Purpose long shank straight flute tap series that provides exceptional value for all general threading applications.","Web Literature 1":"8002024CA-TP,314","Units":"Inch","Thread Size - Inch":["1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Product Overview":"Long Shank, Pulley Tap","Meets 2B Class of Fit":"Yes","Meets 3B Class of Fit":"Yes","Thread Limit":"H3","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Surface Treatment":"Steam Oxide","Thread Type":"UNC","STI Thread":"No","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"1.688976\" - 2.787401\"","Taper-Sizes":"-","Overall-Sizes":"6\" - 12\"","Shank-Sizes":"0.255\" - 0.759016\"","Friendly Name":"916","CategoryBrand":"OSG"}
S110

S110

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FStraight%20Flute%2FList%20S110/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_S110_-_Spiral_Pointed_Taps_-_Catalog"],"Major Diameter - Inch":["0.034","0.047"],"Number of Flutes":"2","Chamfer Length - Inch":["0.033333","0.0125","0.044444","0.016666","0.041666","0.015625"],"Tap Drill Size Max - Inch":["0.0285","0.04","0.0415"],"Neck Length - Inch (L1)":["0.259842","0.338582"],"Tap Drill Size Min - Inch":["0.026","0.0373","0.0379"],"Square Length - Inch (Ik)":"0.1875","Shank Diameter - Inch (d)":["0.141"],"Overall Length - Inch (L)":["1.570866","1.728346"],"Thread Length - Inch (Lc)":["0.200787","0.279527"],"Square Width - Inch (k)":"0.11","Threads Per Inch":["120","90","96"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Chamfer Type":["Plug (4P)","Bottom (1.5P)"],"Benefit 2":"For through hole applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : Casting":"40-65","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"25-80","Cutting Speed (SFM) - Aluminum : 6061; 7075":"40-80","Feature 1":"HSS material","Helix Angle - Degree":"0","Cutting Direction":"RH","Full Description":"OSG General Purpose straight flute miniature taps for ferrous and non-ferrous materials. An exceptional value for general threading applications.","List Name":"GENERAL PURPOSE-HT MINIATURE","Cutting Speed (SFM) - High Carbon Steel : 1065":"20-45","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Medium Carbon Steel : 1035; 1045":"P; Good","Feature 2":"Spiral Point","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"20-50","Web Literature 1":"8002024CA-TP,315","Notes":"Other coatings are available upon request.","Cutting Speed (SFM) - Cast Iron":"25-75","Product Category":"Straight Flute","Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":"BRIGHT","Meets 2B Class of Fit":"Yes","Thread Size - Number":["No. 000","No. 00"],"Thread Limit":["H1","H2"],"Meets 3B Class of Fit":["Yes","No"],"Thread Type":"NS","High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Low Carbon Steel : 1010; 1018":"P; Good","Product Overview":"Spiral Point, Straight Flute","Short Description":"Miniature Taps","STI Thread":"No","Units":"Inch","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.259842\" - 0.338582\"","Taper-Sizes":"-","Overall-Sizes":"1.570866\" - 1.728346\"","Shank-Sizes":"0.141\"","Friendly Name":"S110","CategoryBrand":"OSG"}
S125

S125

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FThreading%2FStyle%2FSpiral%20Flute%2FList%20S125/Taps_-_Tap_-_GENERAL_PURPOSE_-_List_S125_-_Pipe_Taps"],"Number of Flutes":["4","5"],"Major Diameter - Inch":["0.125","0.25","0.375","0.5","0.75","1"],"Threads Per Inch":["27","18","14","11.5"],"Neck Length - Inch (L1)":["0.988","1.318"],"Tap Drill Size Min - Inch":["0.332","0.4375","0.5625","0.703125","0.90625","1.140625"],"Projection - Inch (P)":["0.234","0.375","0.468","0.453","0.578"],"Square Length - Inch (Ik)":["0.375","0.4375","0.5","0.625","0.6875","0.8125"],"Overall Length - Inch (L)":["2.125984","2.437007","2.562992","3.125984","3.251968","3.751968"],"Thread Length - Inch (Lc)":["0.751","1.062","1.374","1.751"],"Shank Diameter - Inch (d)":["0.4375","0.5625","0.7","0.6875","0.9063","1.125"],"Square Width - Inch (k)":["0.328","0.421","0.531","0.515","0.679","0.843"],"View Catalog Page":"Here","Benefit 1":"Increased wear resistance","Cast Iron":"K; Good","Benefit 2":"S/O increases mechanical lubricity","Benefit 4":"For standard and dry seal tapered pipe thread applications","Aluminum : 6061; 7075":"N; Good","Aluminum : Casting":"N; Good","Benefit 3":"Improves wear resistance for extended tap life","Coolant Thru":"No","Cutting Speed (SFM) - Aluminum : 6061; 7075":"15-40","Cutting Speed (SFM) - Aluminum : Casting":"20-35","Cutting Speed (SFM) - High Carbon Steel : 1065":"10-20","Cutting Speed (SFM) - Medium Carbon Steel : 1035; 1045":"10-25","Feature 1":"HSS material","Cutting Direction":"RH","Helix Angle - Degree":"15","Cutting Speed (SFM) - Low Carbon Steel : 1010; 1018":"15-40","Feature 4":"NPT & NPTF","Cutting Speed (SFM) - Cast Iron":"15-50","List Name":"GENERAL PURPOSE-NPT/NPTF SHORT PROJECTION","Low Carbon Steel : 1010; 1018":"P; Good","Interrupted Thread":"No","Meets 6H Class of Fit":"No","Feature 2":"Bright, Steam Oxide surface treatment","Medium Carbon Steel : 1035; 1045":"P; Good","Helix Direction":"RH","Meets 2B Class of Fit":"No","Product Category":"Spiral Flute","Full Description":"General Purpose spiral point tap series that provides exceptional value for all general threading applications.","Feature 3":"TiN, TiCN coating","Web Literature 1":"8002024CA-TP,372","Notes":"Other coatings are available upon request.","Meets 3B Class of Fit":"No","Units":"Inch","Thread Size - Inch":["1/8","1/4","3/8","1/2","3/4","1"],"Meets 4H Class of Fit":"No","Web Literature 4":"800389CA","Surface Treatment":["BRIGHT","Steam Oxide","TiCN"],"Thread Type":["NPT, ANPT","NPTF"],"High Carbon Steel : 1065":"P; Good","Substrate":"HSS","Product Overview":"Short Protection, NPT, NPTF","STI Thread":"No","Diameter-Sizes":"-","Flute-Sizes":"-","Neck-Sizes":"0.988\" - 1.318\"","Taper-Sizes":"-","Overall-Sizes":"2.125984\" - 3.751968\"","Shank-Sizes":"0.4375\" - 1.125\"","Friendly Name":"S125","CategoryBrand":"OSG"}

7/16-14 UNJC 3B 5FL BOTT DIA-OTT

EDP: 3298916

DIA-OTT
List 329

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

7/16-14 UNJC 3B 5FL BOTT DIA-OTT

EDP: 3298916

DIA-OTT
List 329

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT
7/16-14NC 2B 5FL MOD-BOTT DIA-OTT

EDP: 3298116

DIA-OTT
List 329

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

Product Overview

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Quick view

7/16-14NC 2B 5FL MOD-BOTT DIA-OTT

EDP: 3298116

DIA-OTT
List 329

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

Please login to view pricing

Loading...

Check availability

Quantity
1

1

ALTERNATIVE PRODUCT

VIEW PRODUCT

Stocked

Discontinued

Globally Stocked

Made to Order

While Supplies Last

SOLID - DRILLING

INDEXABLE - DRILLING

HOLDERS - DRILLING

STYLE

OTHER

HOLDERS - THREADING

SOLID - MILLING

INDEXABLE - MILLING

HOLDERS - MILLING

STRAIGHT FLUTE

7/16-14 UNJC 3B 5FL BOTT DIA-OTT

DIA-OTT

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

Product Overview

7/16-14 UNJC 3B 5FL BOTT DIA-OTT

DIA-OTT

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

7/16-14NC 2B 5FL MOD-BOTT DIA-OTT

DIA-OTT

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

Product Overview

7/16-14NC 2B 5FL MOD-BOTT DIA-OTT

DIA-OTT

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

STRAIGHT FLUTE

Preview PDF

DIA-OTT

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

Product Overview

DIA-OTT

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

DIA-OTT

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

Product Overview

DIA-OTT

Straight Flute, UNJC, UNJF, DIN Overall Length, OSG CVD Diamond

Download PDF