SQUARE END

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202022/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2022_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.34375","0.375","0.40625","0.4375","0.46875","0.5","0.625","0.75","1"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","5/32","3/16","7/32","1/4","9/32","5/16","11/32","3/8","13/32","7/16","15/32","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Product Overview":"2-Flute, Regular, Square & Corner Radius, Bright","Benefit 4":"3 - 5 times tool life","Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4","5"],"Length of Cut - Inch (Lc)":["0.375","0.5625","0.75","0.8125","1","1.25","1.625","2"],"Helix Angle - Degree":"30","Benefit 2":"Enhances tool life by reducing BUE","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,85|8002024CA-EMT,45","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request. Additional corner radii available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.01","0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 5\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"2022","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202023/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2023_-_Catalog"],"Number of Flutes":"2","Neck Diameter - Inch (d1)":["0.246","0.496","0.621","0.746","0.992"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Neck Length - Inch (L1)":["1.125","1.375","1.625","2","2.625"],"Diameter - Inch (D)":["0.25","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","1/2","5/8","3/4","1"],"Product Overview":"2-Flute, Reduced Neck, Square & Corner Radius, Bright","Benefit 4":"3 - 5 times tool life","Length of Cut - Inch (Lc)":["0.25","0.5","0.625","0.75","1"],"Shank Diameter - Inch (d)":["0.25","0.5","0.625","0.75","1"],"Helix Angle - Degree":"30","Overall Length - Inch (L)":["2.5","3","3.5","4","5"],"Benefit 2":"Enhances tool life by reducing BUE","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,86|8002024CA-EMT,45","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"1.125\" - 2.625\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 5\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"2023","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202024/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2024_-_Catalog"],"Number of Flutes":"2","Overall Length - Inch (L)":["4","6"],"Neck Diameter - Inch (d1)":["0.246","0.496","0.621","0.746","0.992"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.5","0.625","0.75","1"],"Neck Length - Inch (L1)":["2.125","2.375","2.5","3.375"],"Diameter - Fractional Size (D)":["1/4","1/2","5/8","3/4","1"],"Product Overview":"2-Flute, Reduced Neck, Long Length, Square & Corner Radius, Bright","Benefit 4":"3 - 5 times tool life","Length of Cut - Inch (Lc)":["0.25","0.5","0.625","0.75","1"],"Shank Diameter - Inch (d)":["0.25","0.5","0.625","0.75","1"],"Helix Angle - Degree":"30","Benefit 2":"Enhances tool life by reducing BUE","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,87|8002024CA-EMT,45","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"2.125\" - 3.375\"","Taper-Sizes":"-","Overall-Sizes":"4\" - 6\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"2024","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202043/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2043_-_Catalog"],"Number of Flutes":"3","Neck Diameter - Inch (d1)":["0.246","0.496","0.621","0.746","0.992"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Neck Length - Inch (L1)":["1.125","1.375","1.625","2","2.625"],"Diameter - Inch (D)":["0.25","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/4","1/2","5/8","3/4","1"],"Benefit 4":"3 - 5 times tool life","Length of Cut - Inch (Lc)":["0.25","0.5","0.625","0.75","1"],"Shank Diameter - Inch (d)":["0.25","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["2.5","3","3.5","4","5"],"Product Overview":"3-Flute, Reduced Neck, Square & Corner Radius, Bright","Benefit 2":"Enhances tool life by reducing BUE","Helix Angle - Degree":"45","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,88|8002024CA-EMT,47","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"1.125\" - 2.625\"","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 5\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"2043","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202048/End_Mills_-_End_Mill_-_EXOCARB_AERO_Blizzard_-_List_2048_-_Catalog"],"Overall Length - Inch (L)":["4","6"],"Number of Flutes":"3","Neck Diameter - Inch (d1)":["0.246","0.496","0.621","0.746","0.992"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.5","0.625","0.75","1"],"Neck Length - Inch (L1)":["2.125","2.375","2.5","3.375"],"Diameter - Fractional Size (D)":["1/4","1/2","5/8","3/4","1"],"Benefit 4":"3 - 5 times tool life","Length of Cut - Inch (Lc)":["0.25","0.5","0.625","0.75","1"],"Shank Diameter - Inch (d)":["0.25","0.5","0.625","0.75","1"],"Product Overview":"3-Flute, Reduced Neck, Long Length, Square & Corner Radius, Bright","Benefit 2":"Enhances tool life by reducing BUE","Helix Angle - Degree":"45","List Name":"AERO BLIZZARD","Surface Treatment":"BRIGHT","Web Literature 1":"8002024CA-EM,89|8002024CA-EMT,47","Substrate":"Carbide","Benefit 3":"Ideal for rough and finish contouring","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Benefit 1":"Larger depth of cut and maximum feed per tooth","Shank Tolerance":"h6","Feature 3":"DLC available on request","Notes":"DLC coating available upon request.","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Full Description":"Performance Carbide End Mills For Aluminum","Short Description":"Performance Carbide End Mills For Aluminum","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Feature 1":"Refined geometry","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 2":"Ultra smooth Flutes","Corner Radius - Inch (R)":["0.02","0.03","0.06","0.09","0.12"],"Diameter-Sizes":"1/4\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"2.125\" - 3.375\"","Taper-Sizes":"-","Overall-Sizes":"4\" - 6\"","Shank-Sizes":"0.25\" - 1\"","Friendly Name":"2048","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202064/Composites_-_Router_-_EXOPRO_AERO-HBC_45_-_List_2064_-_Catalog"],"Overall Length - Inch (L)":["3","4"],"Number of Flutes":"4","Compression Length - Inch (L2)":["0.25","0.375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["1/4","3/8","1/2"],"Shank Diameter - Inch (d)":["0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.75","2","1"],"Helix Angle - Degree":"45","Product Overview":"4-Flute, Herringbone, OSG CVD Diamond, 45 Degree","List Name":"AERO-HBC 45","Web Literature 1":"8002024CA-EM,330|8002024CA-EMT,172","Web Literature 2":"800212CA-V4","Carbon Fiber (CFRP)":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Aramid Fiber (AFRP)":"Other; Good","Honeycomb: AFRP":"Other; Good","Honeycomb: AI/AI":"Other; Good","Honeycomb: CFRP/AI":"Other; Good","Honeycomb: CFRP/Nomex":"Other; Good","Honeycomb: GFRP/Nomex":"Other; Good","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Feature 1":"Compression mechanism","Type (feature)":"Compression Router","Benefit 2":"Long tool life","Feature 2":"Low cutting force","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Benefit 1":"Neutralizes cutting forces to prevent delamination on both top and bottom laminates.","Coolant Thru":"No","Mill Type":"Single End","Full Description":"Premium High Performance Routers for Composites (CFRP)","Short Description":"Premium High Performance Routers for Composites (CFRP)","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"Cutting Direction":"RH","Diameter-Sizes":"1/4\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"2064","CategoryBrand":"EXOPRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_30_-_Angle_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_30_-_Face_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_30_-_Extra_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202066/Composites_-_Router_-_EXOPRO_AERO-HBC_-_List_2066_-_30_-_Extra_2"],"Number of Flutes":"4","Compression Length - Inch (L2)":["0.125","0.25","0.375","0.5"],"Diameter - Inch (D)":["0.125","0.25","0.375","0.5"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/8","1/4","3/8","1/2"],"Shank Diameter - Inch (d)":["0.125","0.25","0.375","0.5"],"Overall Length - Inch (L)":["1.5","2.5","3"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["0.56","0.75","0.875","1.5"],"Product Overview":"4-Flute, Herringbone, OSG CVD Diamond","List Name":"AERO-HBC","Web Literature 1":"8002024CA-EM,329|8002024CA-EMT,172","Web Literature 2":"800212CA-V4","Carbon Fiber (CFRP)":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Aramid Fiber (AFRP)":"Other; Good","Honeycomb: AFRP":"Other; Good","Honeycomb: AI/AI":"Other; Good","Honeycomb: CFRP/AI":"Other; Good","Honeycomb: CFRP/Nomex":"Other; Good","Honeycomb: GFRP/Nomex":"Other; Good","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Length of Cut - Specification":["LONG","REGULAR"],"Feature 1":"Compression mechanism","Type (feature)":"Compression Router","Benefit 2":"Long tool life","Feature 2":"Low cutting force","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Benefit 1":"Neutralizes cutting forces to prevent delamination on both top and bottom laminates.","Coolant Thru":"No","Mill Type":"Single End","Full Description":"Premium High Performance Routers for Composites (CFRP)","Short Description":"Premium High Performance Routers for Composites (CFRP)","End Cut Type":"Square End","Cutting Direction":"RH","Diameter-Sizes":"1/8\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"2066","CategoryBrand":"EXOPRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202068/Composites_-_Router_-_EXOPRO_AERO-HBC_60_-_List_2068_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202068/Composites_-_Router_-_EXOPRO_AERO-HBC_60_-_List_2068_-_Angle"],"Overall Length - Inch (L)":["3","4"],"Number of Flutes":"2","Compression Length - Inch (L2)":["0.188","0.281","0.375"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.375","0.5"],"Diameter - Fractional Size (D)":["1/4","3/8","1/2"],"Product Overview":"2-Flute, Herringbone, OSG CVD Diamond, 60 Degree","Shank Diameter - Inch (d)":["0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.75","2","1"],"Helix Angle - Degree":"60","List Name":"AERO-HBC 60","Web Literature 1":"8002024CA-EM,331|8002024CA-EMT,173","Web Literature 2":"800212CA-V4","Carbon Fiber (CFRP)":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Honeycomb: AFRP":"Other; Best","Honeycomb: AI/AI":"Other; Best","Honeycomb: CFRP/AI":"Other; Best","Honeycomb: CFRP/Nomex":"Other; Best","Honeycomb: GFRP/Nomex":"Other; Best","Aramid Fiber (AFRP)":"Other; Good","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Feature 1":"Compression mechanism","Type (feature)":"Compression Router","Benefit 2":"Long tool life","Feature 2":"Low cutting force","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Benefit 1":"Neutralizes cutting forces to prevent delamination on both top and bottom laminates.","Coolant Thru":"No","Mill Type":"Single End","Full Description":"Premium High Performance Routers for Composites (CFRP)","Short Description":"Premium High Performance Routers for Composites (CFRP)","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","EXTRA LONG","LONG"],"Cutting Direction":"RH","Diameter-Sizes":"1/4\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"3\" - 4\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"2068","CategoryBrand":"EXOPRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202100/End_Mills_-_End_Mill_-_List_2100_-_EXOCARB_AERO_UVX-Ti_-_Catalog"],"Number of Flutes":"5","Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/2","5/8","3/4","1","1-1/4"],"Diameter - Inch (D)":["0.5","0.625","0.75","1","1.25"],"Length of Cut - Inch (Lc)":["0.625","1","1.25","1.625","1.875","1.5","2.25","3","4"],"Overall Length - Inch (L)":["2.5","3","3.5","4","5","6","7"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","1","1.25"],"Stainless Steels : 300":"M; Good","Helix Angle - Degree":"41-42-43","Surface Treatment":"EXO","Stainless Steels : 400":"M; Good","Benefit 2":"For efficient milling and suppressed vibration","List Name":"AERO UVX-TI-5FL","Benefit 4":"For increased rigidity and high efficient milling","Benefit 3":"For smooth chip evacuation","Benefit 1":"For stable, vibration-free milling","Web Literature 1":"8002024CA-EM,74|8002024CA-EMT,40","Substrate":"Carbide","Feature 3":"Ideal Flute Shape","Units":"Inch","Web Literature 4":"800388CA","Product Overview":"Carbide, EXO Coating, 5 Flute","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":["STUB","REGULAR","LONG"],"Helix Direction":"RH","Feature 1":"Unequal Spacing of End Teeth","Feature 2":"Variable Lead","Full Description":"Variable Lead End Mill for Titanium Alloy","Short Description":"Variable Lead End Mill for Titanium Alloy","Titanium : 6AL4V (30HRC)":"S; Best","Feature 4":"Web Taper","Diameter-Sizes":"1/2\" - 1.25\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 7\"","Shank-Sizes":"0.5\" - 1.25\"","Friendly Name":"2100","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202102/End_Mills_-_End_Mill_-_List_2102_-_EXOCARB_AERO_UVX-Ti_-_Reduced_Neck_-_Catalog"],"Overall Length - Inch (L)":["3.5","4","6.5","5.5","6"],"Number of Flutes":"5","Neck Diameter - Inch (d1)":["0.48","0.605","0.73","0.98","1.23"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Neck Length - Inch (L1)":["1.5","1.875","2.25","3","3.75"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","1","1-1/4"],"Diameter - Inch (D)":["0.5","0.625","0.75","1","1.25"],"Length of Cut - Inch (Lc)":["1","1.25","1.5","2","2.5"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","1","1.25"],"Stainless Steels : 300":"M; Good","Helix Angle - Degree":"41-42-43","Surface Treatment":"EXO","Stainless Steels : 400":"M; Good","Benefit 2":"For efficient milling and suppressed vibration","List Name":"AERO UVX-TI-LN-5FL","Benefit 4":"For increased rigidity and high efficient milling","Benefit 3":"For smooth chip evacuation","Benefit 1":"For stable, vibration-free milling","Web Literature 1":"8002024CA-EM,75|8002024CA-EMT,40","Substrate":"Carbide","Feature 3":"Ideal Flute Shape","Units":"Inch","Web Literature 4":"800388CA","Product Overview":"Carbide, EXO Coating, 5 Flute, Regular Length, Reduced Neck, Square End","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Feature 1":"Unequal Spacing of End Teeth","Feature 2":"Variable Lead","Full Description":"Variable Lead End Mill for Titanium Alloy","Short Description":"Variable Lead End Mill for Titanium Alloy","Titanium : 6AL4V (30HRC)":"S; Best","Feature 4":"Web Taper","Diameter-Sizes":"1/2\" - 1.25\"","Flute-Sizes":"-","Neck-Sizes":"1.5\" - 3.75\"","Taper-Sizes":"-","Overall-Sizes":"3.5\" - 6.5\"","Shank-Sizes":"0.5\" - 1.25\"","Friendly Name":"2102","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202104/End_Mills_-_End_Mill_-_List_2104_-_EXOCARB_AERO_UVX-Ti_-_Reduced_Neck_-_Catalog"],"Length of Cut - Metric (Lc)":["24","32","40","50"],"Number of Flutes":"5","Shank Diameter - Metric (d)":["12","16","20","25"],"Neck Diameter - Metric (d1)":["11.5","15.5","19.5","24.5"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Overall Length - Metric (L)":["90","100","120","140"],"Neck Length - Metric (L1)":["36","48","60","75"],"Diameter - Metric (D)":["12","16","20","25"],"Stainless Steels : 17-4PH":"M; Good","Helix Angle - Degree":"41-42-43","Surface Treatment":"EXO","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Benefit 2":"For efficient milling and suppressed vibration","List Name":"AERO UVX-TI-LN-5FL","Benefit 4":"For increased rigidity and high efficient milling","Benefit 3":"For smooth chip evacuation","Benefit 1":"For stable, vibration-free milling","Web Literature 1":"8002024CA-EM,76|8002024CA-EMT,41","Feature 3":"Ideal Flute Shape","Substrate":"Carbide","Product Overview":"Carbide, EXO Coating, 5 Flute, Regular Length, Reduced Neck, Square End","Cutting Type":"Center Cutting","Shank Tolerance":"h6","View Speed and Feed Page":"Here","View Catalog Page":"Here","Stainless Steels : 400":"M; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Helix Direction":"RH","Feature 1":"Unequal Spacing of End Teeth","Feature 2":"Variable Lead","Full Description":"Variable Lead End Mill for Titanium Alloy","Short Description":"Variable Lead End Mill for Titanium Alloy","Titanium : 6AL4V (30HRC)":"S; Best","Feature 4":"Web Taper","Diameter-Sizes":"12mm - 25mm","Flute-Sizes":"-","Neck-Sizes":"36mm - 75mm","Taper-Sizes":"-","Overall-Sizes":"90mm - 140mm","Shank-Sizes":"12mm - 25mm","Friendly Name":"2104","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Extra_2","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Face","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Group_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Material_1","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FRouters%2FList%202680/Composites_-_Router_-_EXOPRO_AERO-REC_-_List_2680_-_Material_2"],"Number of Flutes":["4","6","8"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Inch (D)":["0.25","0.375","0.5","0.234375","0.3125","0.359375","0.4375","0.484375"],"Diameter - Fractional Size (D)":["1/4","3/8","1/2","15/64","5/16","23/64","7/16","31/64"],"Helix Angle - Degree":"15","Shank Diameter - Inch (d)":["0.25","0.375","0.5"],"Length of Cut - Inch (Lc)":["0.75","1.125","1.5","0.5","1","0.9375","1.3125"],"Overall Length - Inch (L)":["2.5","3"],"Benefit 1":"Enables efficient milling with extremely low cutting forces","Benefit 3":"Ensures smoother and sharper cutting edges providing up to 50 times longer tool life","List Name":"AERO-REC","Feature 3":"OSG's patented diamond coating","Web Literature 1":"8002024CA-EM,332|8002024CA-EMT,174","Web Literature 2":"800212CA-V4","Carbon Fiber (CFRP)":"Other; Best","Carbon/Carbon":"Other; Best","Glass Fiber (GFRP)":"Other; Best","Honeycomb: AI/AI":"Other; Good","Honeycomb: CFRP/AI":"Other; Good","Honeycomb: CFRP/Nomex":"Other; Good","Honeycomb: GFRP/Nomex":"Other; Good","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Benefit 2":"Increases tool life","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DIAMOND","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Feature 2":"Simplified flute management by changing the milling position at the flute","Mill Type":"Single End","Full Description":"Premium High Performance Routers for Composites (CFRP)","Short Description":"Premium High Performance Routers for Composites (CFRP)","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Product Overview":"Rougher, Multiple Flute, OSG CVD Diamond","Feature 1":"Roughing nicks","Type (feature)":"Roughing Router","Diameter-Sizes":"15/64\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 3\"","Shank-Sizes":"0.25\" - 0.5\"","Friendly Name":"2680","CategoryBrand":"EXOPRO"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/End_Mills_-_Ens_Mill_-_EXOCARB_AERO_DLC-AERO_-_List_2843_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/DLC-CR-ETL_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202843/DLC-CR-ETL_-_003"],"Overall Length - Inch (L)":["4.5"],"Number of Flutes":"3","Diameter - Fractional Size (D)":["1/2","5/8","3/4","7/8","1"],"Diameter - Inch (D)":["0.5","0.625","0.75","0.875","1"],"Length of Cut - Inch (Lc)":"2.0236","Helix Angle - Degree":"35","Shank Diameter - Inch (d)":["0.5","0.625","0.75","0.875","1"],"Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Product Overview":"5/8\" to 1\", Corner Radius/Square, DLC Coating, Inch Sizes","Feature 2":"Optimal Flute Shape","List Name":"AERO-ETL","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,81|8002024CA-EMT,43","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 4":"Sharp Cutting Edge","Corner Radius - Inch (R)":["0.03","0.06","0.09","0.12","0.15","0.19"],"Diameter-Sizes":"1/2\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"4.5\"","Shank-Sizes":"0.5\" - 1\"","Friendly Name":"2843","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/End_Mills_-_End_Mill_-_List_2853_-_EXOCARB_AERO-DLC_-_Extra_Long_Length_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202853/DLC_-_Part_-_001"],"Number of Flutes":"3","Overall Length - Inch (L)":["6.5"],"Shank Diameter - Inch (d)":["0.75"],"Diameter - Inch (D)":["0.75"],"Diameter - Fractional Size (D)":["3/4"],"Helix Angle - Degree":"35","Length of Cut - Inch (Lc)":"4","Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Feature 2":"Optimal Flute Shape","Length of Cut - Specification":"EXTRA LONG","List Name":"AERO-ETXL","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,83|8002024CA-EMT,44","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Product Overview":"Carbide, DLC Coating, 3 Flute, Extra Long Length, Square and Corner Radius","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 4":"Sharp Cutting Edge","Corner Radius - Inch (R)":["0.03","0.06","0.09","0.12","0.15","0.19"],"Diameter-Sizes":"3/4\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"6.5\"","Shank-Sizes":"0.75\"","Friendly Name":"2853","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/End_Mills_-_End_Mill_-_EXOCARB_AERO_DLC-AERO_-_List_2873_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/DLC-CR-ETL_-_003","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/DLC-CR-ETL_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202873/DLC_with_Haimer_Holder_-_007"],"Overall Length - Inch (L)":["4"],"Number of Flutes":"3","Corner Radius - Inch (R)":["0.03","0.06","0.09","0.12","0.19"],"Neck Diameter - Inch (d1)":["0.4606","0.559","0.669","0.787","0.921"],"Neck Length - Inch (L1)":["2.205"],"Diameter - Fractional Size (D)":["1/2","5/8","3/4","7/8","1"],"Diameter - Inch (D)":["0.5","0.625","0.75","0.875","1"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["0.75","1","1.125","1.3125","1.5"],"Shank Diameter - Inch (d)":["0.5","0.625","0.75","0.875","1"],"Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Product Overview":"5/8\" to 1\", Corner Radius/Square, DLC Coating, Inch Sizes","Feature 2":"Optimal Flute Shape","List Name":"AERO-ETS","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,77|8002024CA-EMT,42","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Cutting Type":"Center Cutting","Shank Tolerance":"h6","End Cut Type":["Corner Radius","Square End"],"Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Mill Type":"Single End","Type (feature)":"Reduced Neck","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 4":"Sharp Cutting Edge","Diameter-Sizes":"1/2\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"2.205\"","Taper-Sizes":"-","Overall-Sizes":"4\"","Shank-Sizes":"0.5\" - 1\"","Friendly Name":"2873","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/End_Mills_-_End_Mill_-_EXOCARB_AERO_DLC-AERO_-_List_2874_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/End_Mills_-_End_Mill_-_List_2874_-_EXOCARB_AERO-DLC_-_Coolant-Through_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC-CR-ETL_-_001","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_004","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_003","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202874/DLC_-_Part_-_001"],"Overall Length - Inch (L)":["4"],"Number of Flutes":"3","Shank Diameter - Inch (d)":["0.75","0.625","1","0.875"],"Corner Radius - Inch (R)":["0.03","0.06","0.09","0.12","0.19"],"Neck Diameter - Inch (d1)":["0.669","0.559","0.921","0.787"],"Neck Length - Inch (L1)":["2.205"],"Diameter - Inch (D)":["0.75","0.625","1","0.875"],"Diameter - Fractional Size (D)":["3/4","5/8","1","7/8"],"Helix Angle - Degree":"30","Length of Cut - Inch (Lc)":["1.1417","1.0157","1.523","1.3268"],"Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Product Overview":"5/8\" to 1\", Corner Radius/Square, DLC Coating, Inch Sizes, Coolant Through","Feature 2":"Optimal Flute Shape","List Name":"AERO-O-ETS","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,79|8002024CA-EMT,42","Substrate":"Carbide","Units":"Inch","Web Literature 4":"800388CA","Shank Tolerance":"h6","End Cut Type":["Corner Radius","Square End"],"Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Weldon Flat":"No","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Cutting Type":"Non-Center Cutting","Mill Type":"Single End","Coolant Thru":"Yes","Type (feature)":"Reduced Neck","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 4":"Sharp Cutting Edge","Diameter-Sizes":"5/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"2.205\"","Taper-Sizes":"-","Overall-Sizes":"4\"","Shank-Sizes":"0.625\" - 1\"","Friendly Name":"2874","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/End_Mills_-_End_Mill_-_List_2943_-_EXOCARB_AERO-DLC_-_Long_Length_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Part_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202943/DLC_-_Part_-_001"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":"50","Overall Length - Metric (L)":["110"],"Shank Diameter - Metric (d)":["12","16","20"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"16mm to 25mm, Corner Radius/Square End, DLC Coating, Metric Sizes","Diameter - Metric (D)":["12","16","20"],"Helix Angle - Degree":"35","Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Web Literature 4":"800388CA","Feature 2":"Optimal Flute Shape","List Name":"AERO-ETL","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,82|8002024CA-EMT,43","Substrate":"Carbide","Cutting Type":"Center Cutting","Length of Cut - Specification":"LONG","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Helix Direction":"RH","Feature 4":"Sharp Cutting Edge","Corner Radius - Metric (R)":["1","1.6","3","4","5"],"Diameter-Sizes":"12mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"110mm","Shank-Sizes":"12mm - 20mm","Friendly Name":"2943","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/End_Mills_-_End_Mill_-_List_2953_-_EXOCARB_AERO-DLC_-_Extra_Long_Length_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202953/DLC_-_Part_-_001"],"Number of Flutes":"3","Overall Length - Metric (L)":["160"],"Shank Diameter - Metric (d)":["20"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Helix Angle - Degree":"35","Diameter - Metric (D)":["20"],"Length of Cut - Metric (Lc)":"100","Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Web Literature 4":"800388CA","Feature 2":"Optimal Flute Shape","Length of Cut - Specification":"EXTRA LONG","List Name":"AERO-ETXL","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,84|8002024CA-EMT,44","Substrate":"Carbide","Product Overview":"Carbide, DLC Coating, 3 Flute, Extra Long Length, Square and Corner Radius","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Helix Direction":"RH","Feature 4":"Sharp Cutting Edge","Corner Radius - Metric (R)":["1","1.6","3","4","5"],"Diameter-Sizes":"20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"160mm","Shank-Sizes":"20mm","Friendly Name":"2953","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/End_Mills_-_End_Mill_-_List_2973_-_EXOCARB_AERO-DLC_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Part_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202973/DLC_-_Part_-_001"],"Length of Cut - Metric (Lc)":["18","24","30","37.5"],"Number of Flutes":"3","Overall Length - Metric (L)":["100"],"Shank Diameter - Metric (d)":["12","16","20","25"],"Neck Diameter - Metric (d1)":["11","14.4","18","23"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"16mm to 25mm, Corner Radius/Square, DLC Coating, Metric Sizes","Neck Length - Metric (L1)":["55"],"Diameter - Metric (D)":["12","16","20","25"],"Helix Angle - Degree":"30","Feature 1":"High Rigidity","Benefit 2":"Excellent chip evacuation","Benefit 3":"Excellent Welding Resistance and Lubricity","Benefit 4":"Exceptional Performance in Aluminum Alloy","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Web Literature 4":"800388CA","Feature 2":"Optimal Flute Shape","List Name":"AERO-ETS","Benefit 1":"Applicable for High Power Equipment","Web Literature 1":"8002024CA-EM,78|8002024CA-EMT,42","Substrate":"Carbide","Cutting Type":"Center Cutting","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 3":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 4":"Sharp Cutting Edge","Corner Radius - Metric (R)":["1","1.6","3","4","5"],"Diameter-Sizes":"12mm - 25mm","Flute-Sizes":"-","Neck-Sizes":"55mm","Taper-Sizes":"-","Overall-Sizes":"100mm","Shank-Sizes":"12mm - 25mm","Friendly Name":"2973","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/End_Mills_-_End_Mill_-_List_2974_-_EXOCARB_AERO-DLC_-_Coolant-Through_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC-CR-ETL_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_with_Haimer_Holder_-_007","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Machine_-_008","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Background_Image","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Part_-_002","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Part_-_005","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%202974/DLC_-_Part_-_001"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":["30","37.5"],"Overall Length - Metric (L)":["100"],"Neck Diameter - Metric (d1)":["18","23"],"Shank Diameter - Metric (d)":["20","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"16mm to 25mm, Corner Radius/Square, DLC Coating, Metric Sizes, Coolant Through","Neck Length - Metric (L1)":["55"],"Helix Angle - Degree":"30","Diameter - Metric (D)":["20","25"],"Benefit 2":"Excellent chip evacuation","Full Description":"High Speed Carbide End Mills for Aluminum Alloy","Short Description":"High Speed Carbide End Mills for Aluminum Alloy","Web Literature 4":"800388CA","Feature 2":"Optimal Flute Shape","List Name":"AERO-O-ETS","Web Literature 1":"8002024CA-EM,80|8002024CA-EMT,43","Substrate":"Carbide","Shank Tolerance":"h6","Surface Treatment":"DLC","Feature 1":"DLC Coating","View Speed and Feed Page":"Here","View Catalog Page":"Here","Units":"Metric","Aluminum : 6061; 7075":"N; Best","Aluminum : Casting":"N; Best","Weldon Flat":"No","Cutting Type":"Non-Center Cutting","Coolant Thru":"Yes","Mill Type":"Single End","Benefit 1":"Provides welding resistance and lubricity with optimal performance in aluminum alloys","Benefit 3":"Reduced cutting forces","Type (feature)":"Reduced Neck","End Cut Type":["Square End","Corner Radius"],"Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Feature 3":"Sharp Cutting Edge","Corner Radius - Metric (R)":["1","1.6","3","4","5"],"Diameter-Sizes":"20mm - 25mm","Flute-Sizes":"-","Neck-Sizes":"55mm","Taper-Sizes":"-","Overall-Sizes":"100mm","Shank-Sizes":"20mm - 25mm","Friendly Name":"2974","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203604/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3604_-_Catalog","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203604/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3604_-_Extra_4","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203604/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3604_-_Extra_5","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203604/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3604_-_Extra_6"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","9/32","5/16","3/8","7/16","1/2","5/8","3/4","1"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","2.75","3","3.5","4"],"Length of Cut - Inch (Lc)":["0.1875","0.25","0.375","0.5","0.5625","0.625","0.75","0.8125","1","1.25","1.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Regular Length, WXL","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,68|8002024CA-EMT,34","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Cutting Direction":"RH","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":"+0 / -0.0008","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-EMS","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"3604","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203619/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3619_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.25","0.3125","0.375","0.4375","0.5"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","1/4","5/16","3/8","7/16","1/2"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5"],"Product Overview":"2 Flute, Stub Length, WXL","Length of Cut - Inch (Lc)":["0.09375","0.125","0.140625","0.171875","0.1875","0.234375","0.28125","0.375","0.46875","0.5625","0.65625","0.75"],"Overall Length - Inch (L)":["2","2.5","2.75","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,59|8002024CA-EMT,20","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-1.5D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.5\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 3\"","Shank-Sizes":"0.125\" - 0.5\"","Friendly Name":"3619","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203620/List_3620","https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203620/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3620_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","9/32","5/16","3/8","7/16","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Product Overview":"2 Flute, Stub Length, WXL","Length of Cut - Inch (Lc)":["0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875","1","1.25","1.5"],"Overall Length - Inch (L)":["2","2.5","2.75","3","3.5","4"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,61|8002024CA-EMT,23","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-2D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 4\"","Shank-Sizes":"0.125\" - 0.75\"","Friendly Name":"3620","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203621/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3621_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","9/32","5/16","3/8","7/16","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Product Overview":"2 Flute, Regular Length, WXL","Length of Cut - Inch (Lc)":["0.1875","0.234375","0.28125","0.328125","0.375","0.46875","0.5625","0.65625","0.75","0.84375","0.9375","1.125","1.3125","1.5","1.875","2.25"],"Overall Length - Inch (L)":["2","2.25","2.5","2.75","3","3.25","3.5","4.25","5"],"Helix Angle - Degree":"35","Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,63|8002024CA-EMT,23","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-3D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2\" - 5\"","Shank-Sizes":"0.125\" - 0.75\"","Friendly Name":"3621","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203642/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3642_-_WXL-EML_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.0625","0.078125","0.09375","0.109375","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.5","0.625"],"Diameter - Fractional Size (D)":["1/16","5/64","3/32","7/64","1/8","5/32","3/16","7/32","1/4","5/16","3/8","1/2","5/8"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.5","0.625"],"Overall Length - Inch (L)":["1.5","2","2.5","3","4","5"],"Length of Cut - Inch (Lc)":["0.25","0.3125","0.5","0.625","0.6875","0.75","0.875","1","1.125","1.375","1.625","2"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Long Length, WXL","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,71|8002024CA-EMT,38","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800355CA","Alloy Steels : 4140; 4340":"P; Best","Units":"Inch","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":["LONG","EXTRA LONG"],"Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Cutting Diameter Tolerance - Inch":["+0 / -0.0008","+0 / -0.0012"],"Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-EML","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/16\" - 0.625\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 5\"","Shank-Sizes":"0.125\" - 0.625\"","Friendly Name":"3642","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203704/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3704_-_Catalog"],"Length of Cut - Metric (Lc)":["2.5","4","6","8","10","11","13","16","19","22","26"],"Number of Flutes":"4","Overall Length - Metric (L)":["40","45","50","60","70","75"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","12"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Product Overview":"4 Flute, Stub Length, WXL","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,69|8002024CA-EMT,35","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG"],"Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","List Name":"WXL-EMS","Diameter-Sizes":"1mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"40mm - 75mm","Shank-Sizes":"4mm - 12mm","Friendly Name":"3704","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203720/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3720_-_Catalog"],"Number of Flutes":"2","Overall Length - Metric (L)":["45","50"],"Shank Diameter - Metric (d)":["4","6"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"2 Flute, Stub Length, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","5.999999"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.15","0.3","0.45","0.6","0.75","0.9","1.1","1.2","1.4","1.5","1.7","1.8","2","2.1","2.3","2.4","2.6","2.7","2.9","3","3.2","3.3","3.5","3.6","3.8","3.9","4.1","4.2","4.4","4.5","4.7","4.8","5","5.1","5.3","5.4","5.6","5.7","5.9","6","6.2","6.3","6.5","6.6","6.8","6.9","7.1","7.2","7.4","7.5","7.7","7.8","8","8.1","8.3","8.4","8.6","8.7","8.9","9"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,60|8002024CA-EMT,21","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-1.5D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"0.1mm - 5.999999mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 50mm","Shank-Sizes":"4mm - 6mm","Friendly Name":"3720","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203721/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3721_-_Catalog"],"Number of Flutes":"2","Overall Length - Metric (L)":["45","50","60","70","75","90","100"],"Shank Diameter - Metric (d)":["4","6","8","10","12","16","20"],"Cutting Diameter Tolerance - Metric":["+0 / -0.020","+0 / -0.030"],"Product Overview":"2 Flute, Regular Length, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","5.999999","6.5","7","7.5","8","8.5","9","9.5","10","11","12","16","18","20"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.2","0.4","0.6","0.8","1","1.2","1.4","1.6","1.8","2","2.2","2.4","2.6","2.8","3","3.2","3.4","3.6","3.8","4","4.2","4.4","4.6","4.8","5","5.2","5.4","5.6","5.8","6","6.2","6.4","6.6","6.8","7","7.2","7.4","7.6","7.8","8","8.2","8.4","8.6","8.8","9","9.2","9.4","9.6","9.8","10","10.2","10.4","10.6","10.8","11","11.2","11.4","11.6","11.8","12","13","14","15","16","17","18","19","20","22","24","32","36","40"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,62|8002024CA-EMT,24","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-2D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"0.1mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 100mm","Shank-Sizes":"4mm - 20mm","Friendly Name":"3721","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203722/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3722_-_Catalog"],"Number of Flutes":"2","Overall Length - Metric (L)":["45","50","55","60","65","70","75","80","90","110","130"],"Shank Diameter - Metric (d)":["4","6","8","10","12","16","20"],"Cutting Diameter Tolerance - Metric":["+0 / -0.020","+0 / -0.030"],"Product Overview":"2 Flute, Regular Length, WXL","Diameter - Metric (D)":["0.1","0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","6.5","7","7.5","8","8.5","9","9.5","10","11","12","16","18","20"],"Helix Angle - Degree":"35","Length of Cut - Metric (Lc)":["0.3","0.6","0.9","1.2","1.5","1.8","2.1","2.4","2.7","3","3.3","3.6","3.9","4.2","4.5","4.8","5.1","5.4","5.7","6","6.3","6.6","6.9","7.2","7.5","7.8","8.1","8.4","8.7","9","9.3","9.6","9.9","10.2","10.5","10.8","11.1","11.4","11.7","12","12.3","12.6","12.9","13.2","13.5","13.8","14.1","14.4","14.7","15","15.3","15.6","15.9","16.2","16.5","16.8","17.1","17.4","17.7","18","19.5","21","22.5","24","27","28.5","30","33","36","48","54","60"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,64|8002024CA-EMT,26","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Length of Cut - Specification":"REGULAR","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-3D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"0.1mm - 20mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 130mm","Shank-Sizes":"4mm - 20mm","Friendly Name":"3722","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203723/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3723_-_Catalog"],"Number of Flutes":"2","Overall Length - Metric (L)":["45","50","55","60","65","80","90","100"],"Shank Diameter - Metric (d)":["4","6","8","10","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.020","Product Overview":"2 Flute, Long Length, WXL","Diameter - Metric (D)":["0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.1","1.2","1.3","1.4","1.5","1.6","1.7","1.8","1.9","2","2.1","2.2","2.3","2.4","2.5","2.6","2.7","2.8","2.9","3","3.1","3.2","3.3","3.4","3.5","3.6","3.7","3.8","3.9","4","4.1","4.2","4.3","4.4","4.5","4.6","4.7","4.8","4.9","5","5.1","5.2","5.3","5.4","5.5","5.6","5.7","5.8","5.9","6","8","10","12"],"Length of Cut - Metric (Lc)":["0.8","1.2","1.6","2","2.4","2.8","3.2","3.6","4","4.4","4.8","5.2","5.6","6","6.4","6.8","7.2","7.6","8","8.4","8.8","9.2","9.6","10","10.4","10.8","11.2","11.6","12","12.4","12.8","13.2","13.6","14","14.4","14.8","15.2","15.6","16","16.4","16.8","17.2","17.6","18","18.4","18.8","19.2","19.6","20","20.4","20.8","21.2","21.6","22","22.4","22.8","23.2","23.6","24","32","40","48"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Helix Angle - Degree":"40","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,65|8002024CA-EMT,28","Web Literature 2":"800304CA","Hardened Steels : 35-45 HRC":"H; Best","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Hardened Steels : 45-50 HRC":"H; Best","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Length of Cut - Specification":"LONG","Hardened Steels : 50-70 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-4D-DE","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"0.2mm - 12mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"45mm - 100mm","Shank-Sizes":"4mm - 12mm","Friendly Name":"3723","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203742/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3742_-_Catalog"],"Diameter - Metric (D)":["3","3.5","4","4.5","5","5.5","6","6.5","7","7.5","8","8.5","9","9.5","10","10.5","11","11.5","12","13","14","15","16","18","20","23","24","25","26"],"Number of Flutes":"4","Overall Length - Metric (L)":["50","60","70","80","90","100","105","115","125","140"],"Cutting Diameter Tolerance - Metric":"+0 / -0.030","Shank Diameter - Metric (d)":["6","8","10","12","16","20","25"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Length of Cut - Metric (Lc)":["12","14","17","20","24","28","34","40","48","56","67"],"Product Overview":"4 Flute, Long Length, WXL","Feature 2":"High Precision geometry","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,72|8002024CA-EMT,38","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800355CA|800304CA","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":["LONG","REGULAR"],"Medium Carbon Steel : 1035; 1045":"P; Best","Stainless Steels : 17-4PH":"M; Best","Shank Tolerance":"h6","Stainless Steels : 300":"M; Best","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 400":"M; Best","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Benefit 1":"The hardest most wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","List Name":"WXL-EML","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"3mm - 26mm","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"50mm - 140mm","Shank-Sizes":"6mm - 25mm","Friendly Name":"3742","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203791/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3791_-_Catalog"],"Number of Flutes":"2","Overall Length - Metric (L)":["45","50","55","60","70","80","90","100","110","65","120"],"Shank Diameter - Metric (d)":["4","6"],"Cutting Diameter Tolerance - Metric":"+0 / -0.015","Neck Length - Metric (L1)":["0.5","1","1.5","2","2.5","3","3.5","4","5","6","9","7","8","10","12","15","18","14","16","20","24","22","25","30","38","40","45","35","50","60"],"Product Overview":"2 Flute, Stub Length, Long Neck, Rib Processing, WXL","Diameter - Metric (D)":["0.2","0.3","0.4","0.5","0.6","0.7","0.8","0.9","1","1.2","1.4","1.5","1.6","1.8","2","2.5","3","4","5"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["0.3","0.45","0.6","0.7","0.9","1","1.2","1.35","1.5","1.8","2.1","2.3","2.4","2.7","3","3.7","4.5","6","7.5","2.5"],"Web Literature 4":"800388CA","Feature 2":"High Precision geometry","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Stainless Steels : 400":"M; Good","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":["8002024CA-EM,66|8002024CA-EMT,30","8002024CA-EM,67|8002024CA-EMT,30"],"Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800304CA|800291CA","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Type (feature)":"Long Neck","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","List Name":"WXL-LN-EDS","Neck Diameter - Metric (d1)":["1.45","0.95"],"Diameter-Sizes":"0.2mm - 5mm","Flute-Sizes":"-","Neck-Sizes":"0.5mm - 60mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 120mm","Shank-Sizes":"4mm - 6mm","Friendly Name":"3791","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%203794/End_Mills_-_End_Mill_-_EXOCARB_WXL_-_List_3794_-_Catalog"],"Number of Flutes":"4","Neck Diameter - Metric (d1)":["0.95","1.15","1.35","1.45","1.55","1.75","1.95","2.4","2.85"],"Overall Length - Metric (L)":["45","50","60","55","70","65","80"],"Shank Diameter - Metric (d)":["4","6"],"Cutting Diameter Tolerance - Metric":"+0 / -0.015","Neck Length - Metric (L1)":["4","6","8","10","12","16","14","22","18","20","25","30","5"],"Diameter - Metric (D)":["1","1.2","1.4","1.5","1.6","1.8","2","2.5","3"],"Helix Angle - Degree":"35","Web Literature 4":"800388CA","Length of Cut - Metric (Lc)":["1.5","1.8","2.1","2.3","2.4","2.7","3","3.7","4.5"],"Product Overview":"4 Flute, Long Neck, Rib Processing, WXL","Feature 2":"High Precision geometry","Stainless Steels : 300":"M; Good","Feature 3":"High strength core diameter","Benefit 4":"Higher coating oxidation temp & hardness dramatically improve wear resistance.","Stainless Steels : 400":"M; Good","Web Video 1":"https://youtu.be/dNdGq78-DvA","Hardened Steels : 35 HRC":"H; Best","Web Literature 1":"8002024CA-EM,70|8002024CA-EMT,36","Hardened Steels : 35-45 HRC":"H; Best","Web Literature 2":"800304CA|800291CA","Alloy Steels : 4140; 4340":"P; Best","Substrate":"Carbide","Web Literature 3":"800366CA|800365CA","Die Steels":"P; Best","Cast Iron":"K; Best","High Carbon Steel : 1065":"P; Best","Cutting Type":"Center Cutting","Low Carbon Steel : 1010; 1018":"P; Best","Hardened Steels : 45-50 HRC":"H; Good","Medium Carbon Steel : 1035; 1045":"P; Best","Type (feature)":"Long Neck","Shank Tolerance":"h6","Benefit 2":"High accuracy all but eliminates need for benching and rework for mold makers.","Stainless Steels : 17-4PH":"M; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Units":"Metric","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","List Name":"WXL-LN-EMS","Mill Type":"Single End","Full Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","Short Description":"Premium High Performance Carbide End Mills for Pre-hardened & Hardened Steels","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Benefit 1":"The hardest ost wear resistant carbide possible for incredible wear resistance.","Helix Direction":"RH","Benefit 3":"Tools utilize thicker core diameters for the ultimate in strength and rigidity.","Feature 1":"Ultra-fine micrograin carbide","Nickel Alloy : Inconel":"S; Good","Surface Treatment":"WXL","Feature 4":"WXL coating - +1100 Celsius Oxidation Temp. & +3100Hv in hardness","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1mm - 3mm","Flute-Sizes":"-","Neck-Sizes":"4mm - 30mm","Taper-Sizes":"-","Overall-Sizes":"45mm - 80mm","Shank-Sizes":"4mm - 6mm","Friendly Name":"3794","CategoryBrand":"EXOCARB"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20402/End_Mills_-_End_Mill_-_Carbide_-_List_402_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"2","Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Product Overview":"2 Flute","Diameter - Metric (D)":["0.5","1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"30","Length of Cut - Metric (Lc)":["1.5","3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":["8002024CA-EM,125|8002024CA-EMT,68","8002024CA-EM,127|8002024CA-EMT,68","8002024CA-EM,126|8002024CA-EMT,68"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN","TiCN"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Deep Side Milling":"No","Plunging":"No","Trochoidal Milling":"No","Units":["Metric","Inch"],"Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Contour Milling":"Yes","Helical Milling":"Yes","Ramping":"Yes","Side Milling":"Yes","Slotting":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.328125","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.125","0.140625","0.1875","0.25","0.3125","0.375","1.5","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Diameter-Sizes":"0.5mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"402","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20403/End_Mills_-_End_Mill_-_Carbide_-_List_403_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"3","Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Product Overview":"3 Flute","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":["8002024CA-EM,128|8002024CA-EMT,68","8002024CA-EM,130|8002024CA-EMT,68","8002024CA-EM,129|8002024CA-EMT,68"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Deep Side Milling":"No","Plunging":"No","Trochoidal Milling":"No","Units":["Metric","Inch"],"Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Contour Milling":"Yes","Helical Milling":"Yes","Ramping":"Yes","Side Milling":"Yes","Slotting":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","LONG","STUB"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Diameter - Inch (D)":["0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","3/8","7/16","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Length of Cut - Inch (Lc)":["0.1875","0.25","0.3125","0.375","1.5","0.5","0.5625","0.625","0.75","0.8125","1","1.125","1.25","1.375"],"Diameter-Sizes":"1mm - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"403","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20404/End_Mills_-_End_Mill_-_Carbide_-_List_404_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","1","0.109375","0.125","0.140625","0.15625","0.171875","0.1875","0.203125","0.21875","0.234375","0.25","0.265625","0.28125","0.296875","0.3125","0.328125","0.34375","0.359375","0.375","0.390625","0.40625","0.421875","0.4375","0.453125","0.46875","0.484375","0.5","0.5625","0.625","0.6875","0.75","0.875"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","1","7/64","1/8","9/64","5/32","11/64","3/16","13/64","7/32","15/64","1/4","17/64","9/32","19/64","5/16","21/64","11/32","23/64","3/8","25/64","13/32","27/64","7/16","29/64","15/32","31/64","1/2","9/16","5/8","11/16","3/4","7/8"],"Shank Diameter - Inch (d)":["0.125","1","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["0.125","0.140625","0.1875","0.25","0.3125","0.375","1.5","0.5","0.5625","0.625","0.75","0.8125","0.875","1","1.125","1.25","1.375"],"Overall Length - Inch (L)":["1.5","4","2","2.5","2.75","3","3.5"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":["8002024CA-EM,131|8002024CA-EMT,72","8002024CA-EM,133|8002024CA-EMT,72","8002024CA-EM,132|8002024CA-EMT,72"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Length of Cut - Specification":["LONG","REGULAR","STUB"],"Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Deep Side Milling":"No","Plunging":"No","Trochoidal Milling":"No","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Contour Milling":"Yes","Helical Milling":"Yes","Ramping":"Yes","Side Milling":"Yes","Slotting":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Length of Cut - Metric (Lc)":["3","5","7","8","10","12","14","16","19","21","22","25","30","32","35","38"],"Overall Length - Metric (L)":["39","51","64","70","76","89","102"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12","14","16","18","20","22","25"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12","14","16","18","20","22","25"],"Diameter-Sizes":"1/32\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 102mm","Shank-Sizes":"3mm - 1\"","Friendly Name":"404","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20410/End_Mills_-_End_Mill_-_Roughing_Cut_-_List_410_-_Roughing_End_Mills_-_Catalog"],"Number of Flutes":"3","Diameter - Fractional Size (D)":["1/2","5/8","3/4","1"],"Diameter - Inch (D)":["0.5","0.625","0.75","1"],"Helix Angle - Degree":"25","Product Overview":"3 Flute, HSS-Co, Regular Pitch, Stub, Roughing Cut","Length of Cut - Inch (Lc)":["0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["2.5","2.75","2.875","3.5"],"Web Literature 4":"800388CA","Shank Diameter - Inch (d)":["0.5","0.625","0.75","1"],"Stainless Steels : 300":"M; Good","Substrate":"HSS-CO","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,178|8002024CA-EMT,88","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Hardened Steels : 35 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","List Name":"COBALT HSS ROUGHER SQ","Full Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Short Description":"Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Stainless Steels : 17-4PH":"M; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Weldon Flat":"Yes","Mill Type":"Single End","End Cut Type":"Square End","Cutting Direction":"RH","Length of Cut - Specification":"STUB","Helix Direction":"RH","Type (feature)":"Roughing","Titanium : 6AL4V (30HRC)":"S; Good","Diameter-Sizes":"1/2\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"2.5\" - 3.5\"","Shank-Sizes":"0.5\" - 1\"","Friendly Name":"410","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20412/End_Mills_-_End_Mill_-_Carbide_-_List_412_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"2","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Product Overview":"2 Flute","Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":"8002024CA-EM,122|8002024CA-EMT,68","Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiCN","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Length of Cut - Metric (Lc)":["2","3","4","5","6","7","8","9","10","12","14","16"],"Overall Length - Metric (L)":["39","51","64"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12"],"Diameter-Sizes":"1/32\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"3mm - 0.75\"","Friendly Name":"412","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20414/End_Mills_-_End_Mill_-_Carbide_-_List_414_-_Standard_Square_Corner_Radius_-_Catalog"],"Number of Flutes":"4","Diameter - Inch (D)":["0.03125","0.046875","0.0625","0.078125","0.09375","0.109375","0.125","0.140625","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Cutting Diameter Tolerance - Inch":"+0 / -0.002","Diameter - Fractional Size (D)":["1/32","3/64","1/16","5/64","3/32","7/64","1/8","9/64","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","5/8","3/4"],"Shank Diameter - Inch (d)":["0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.625","0.75"],"Length of Cut - Inch (Lc)":["0.078125","0.09375","0.125","0.15625","0.1875","0.21875","0.25","0.28125","0.3125","0.375","0.4375","0.5","0.625","0.75","1"],"Overall Length - Inch (L)":["1.5","2","2.5","3"],"Helix Angle - Degree":"30","Web Literature 4":"800388CA","Product Overview":"4 Flute, Stub Length","Stainless Steels : 300":"M; Good","Stainless Steels : 400":"M; Good","Web Literature 1":["8002024CA-EM,123|8002024CA-EMT,72","8002024CA-EM,124|8002024CA-EMT,72"],"Notes":"Other coatings available upon request.","Surface Treatment":["BRIGHT","TiAlN"],"Units":["Inch","Metric"],"Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Cutting Type":"Center Cutting","Cast Iron":"K; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","Die Steels":"P; Good","High Carbon Steel : 1065":"P; Good","Low Carbon Steel : 1010; 1018":"P; Good","Medium Carbon Steel : 1035; 1045":"P; Good","View Speed and Feed Page":"Here","View Catalog Page":"Here","Aluminum : Casting":"N; Good","Weldon Flat":"No","Coolant Thru":"No","Aluminum : 6061; 7075":"N; Good","Mill Type":"Single End","End Cut Type":"Square End","Length of Cut - Specification":["REGULAR","STUB"],"Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE SQ","Helix Direction":"RH","Length of Cut - Metric (Lc)":["2","3","4","5","6","7","8","9","10","12","14","16"],"Overall Length - Metric (L)":["39","51","64"],"Shank Diameter - Metric (d)":["3","4","5","6","8","10","11","12"],"Cutting Diameter Tolerance - Metric":"+0 / -0.050","Diameter - Metric (D)":["1","1.5","2","2.5","3","3.5","4","4.5","5","6","7","8","9","10","11","12"],"Diameter-Sizes":"1/32\" - 0.75\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 3\"","Shank-Sizes":"3mm - 0.75\"","Friendly Name":"414","CategoryBrand":"OSG"}

{"Images":["https://res.cloudinary.com/osg-usa-inc/image/upload/f_jpg,q_auto//Products%2FMilling%2FSolid%2FSquare%20End%2FList%20415/End_Mills_-_End_Mill_-_Carbide_-_List_415_-_Standard_Square_Corner_Radius_-_Catalog"],"Overall Length - Inch (L)":["4","1.5","2","2.5","2.75","3","3.5"],"Shank Diameter - Inch (d)":["1","0.125","0.1875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Cutting Diameter Tolerance - Inch":["+0 / -0.005","+0 / -0.003","+0 / -0.004"],"Diameter - Fractional Size (D)":["1","1/8","5/32","3/16","7/32","1/4","5/16","3/8","7/16","1/2","9/16","5/8","3/4","7/8"],"Helix Angle - Degree":"15","Diameter - Inch (D)":["1","0.125","0.15625","0.1875","0.21875","0.25","0.3125","0.375","0.4375","0.5","0.5625","0.625","0.75","0.875"],"Length of Cut - Inch (Lc)":["1.5","0.5","0.5625","0.625","0.75","0.8125","1","1.125","1.25"],"Web Literature 4":"800388CA","Cutting Type":"End Cutting","Web Literature 1":"8002024CA-EM,140","Notes":"Other coatings available upon request.","Surface Treatment":"BRIGHT","Units":"Inch","Substrate":"Carbide","Hardened Steels : 35 HRC":"H; Good","Hardened Steels : 35-45 HRC":"H; Good","Hardened Steels : 45-50 HRC":"H; Good","Alloy Steels : 4140; 4340":"P; Good","High Carbon Steel : 1065":"P; Good","View Catalog Page":"Here","Weldon Flat":"No","Coolant Thru":"No","Mill Type":"Single End","End Cut Type":"Square End","Full Description":"Standard Carbide End Mills for General Milling Applications","Short Description":"Standard Carbide End Mills for General Milling Applications","Cutting Direction":"RH","List Name":"STANDARD CARBIDE TOUGHY MILLS","Length of Cut - Specification":["STUB","LONG","REGULAR"],"Helix Direction":"RH","Type (feature)":"Toughy Mill","Product Overview":"Toughy Mills","Diameter-Sizes":"1/8\" - 1\"","Flute-Sizes":"-","Neck-Sizes":"-","Taper-Sizes":"-","Overall-Sizes":"1.5\" - 4\"","Shank-Sizes":"0.125\" - 1\"","Friendly Name":"415","CategoryBrand":"OSG"}